Parallel Virtual File Systems on Microsoft Azure – Part 2: Lustre on Azure

Written by Kanchan Mehrotra, Tony Wu, and Rakesh Patil from AzureCAT. Reviewed by Solliance. Edited by Nanette Ray.  

This article is also available as an eBook:

• Download the Parallel Virtual File Systems eBook

Find Part 1 of the this series here:

• Part 1: Overview

 

Lustre is currently the most widely used parallel virtual file system (PVFS) in high-performance computing (HPC) solutions. Lustre file systems can scale to tens of thousands of client nodes and tens of petabytes of storage. Our Lustre file system performed well on Azure for large file system. You can refer to the testing results in this article for more details.

Lustre clusters contain four kinds of systems:

1. File system clients, which can be used to access the file system.
2. Object storage servers (OSSs), which provide file I/O services and manage the object storage targets (OSTs).
3. Metadata servers (MDSs), which manage the names and directories in the file system and store them on a metadata target (MDT).
4. Management servers (MGSs), which work as master nodes for the entire cluster setup and contain information about all the nodes attached within the cluster.

A single node can be used to serve as both an MDS and MGS as we have done in our testing. Figure 1 shows a standard Lustre file system architecture.

Figure 1. Lustre file system architecture

Installation

Lustre runs on a variety of Linux kernels from Linux distributions, including Red Hat Enterprise Linux (RHEL) and CentOS. For our performance evaluation, we installed Lustre 2.9.0 on an OpenLogic CentOS 7.3 image from the Azure Marketplace and configured the nodes as follows:

• First node serves as both the MGS and MDS with a virtual machine size of DS14v2, containing 16 cores and managed OS disks.
• Second node serves as the OSS. We attached 10 additional P30 data disks of 1 terabyte (TB) each for a total of 10 TB storage for a single OSS node.
• Third node serves as a client. To measure performance, we installed multiple testing tools, including IOR (Interleaved or Random) and MDTest.

To scale the cluster, we added more OSSs with 10 additional disks of 1 TB each. We ran performance tests for varieties of OSS nodes—that is, 1, 2, 4, 8, 12…20. The test environment also used openMPI (included in CentOS 7.2) as the Message Passing Interface (MPI).

TIP: This document walks you through a manual Lustre installation, so you can see how to scale specific components later if desired. However, you can also install and configure Lustre 2.9.0 using an Azure Resource Manager template available on GitHub. To test your setup, install the testing tools described later in this document. Azure Marketplace also includes Intel Cloud Edition for Lustre software.

1. Install Lustre 2.9.0 packages on server nodes

1. If required for performance tuning, install Linux Integration Services (LIS ) packages with the following commands:

 sudo yum update
sudo reboot
sudo yum install microsoft-hyper-v

NOTE: LIS packages are intended to improve network performance, but we performed our benchmark tests without them. We didn’t see any performance improvements when LIS packages were installed and sometimes even saw lower performance. When we tested, the NDIS single root I/O virtualization (SR-IOV) interface was not available, but it will help.

2. Log on to the server node using a Secure Shell (SSH) client, such as PuTTY.
3. Go to the /etc/yum.repos.d folder and create a file named LustrePackage.repo with the following contents:

 [lustreserver]
name=lustreserver
baseurl=https://downloads.hpdd.intel.com/public/lustre/latest-feature-release/el7/server/
enabled=1
gpgcheck=0

[e2fs]
name=e2fs
baseurl=https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/
enabled=1
gpgcheck=0

[lustreclient]
name=lustreclient
baseurl=https://downloads.hpdd.intel.com/public/lustre/latest-feature-release/el7/client/
enabled=1
gpgcheck=0

4. To make sure the repos were created, run:

 yum repolist

5. Install the following packages in the order shown:

   1. Install the Linux kernel with Lustre software patches:

       yum install kernel-3.10.0-514.el7_lustre.x86_64
      

   2. Install the Lustre software command-line tools:

 yum install lustre-2.9.0-1.el7.x86_64

6. To verify that all the dependent binaries were installed on the server, do the following:

   1. Install the Lustre kernel module patches:

       yum install kmod-lustre-2.9.0-1.el7.x86_64
      

   2. Install the Lustre back-end file system tool for ldiskfs-based servers:

       yum install kmod-lustre-osd-ldiskfs-2.9.0-1.el7.x86_64
      

   3. Install the helper library for mount.lustre and mkfs.lustre for ldiskfs-based servers:yum install lustre-osd-ldiskfs-mount-2.9.0-1.el7.x86_64

   4. Install and update e2fsprogs:

 yum install e2fsprogs

7. Repeat steps 1–5 to install all required RPM packages for Lustre 2.9.0 for each server in the cluster (MGS/MDS or OSS).
8. To configure LNET, run the following commands:

 #Configure LNET
echo "options lnet networks=tcp"> /etc/modprobe.d/lnet.conf
#Automatically start servers
chkconfig lnet --add
chkconfig lnet on
chkconfig lustre --add
chkconfig lustre on
reboot

2. Configure the MGS/MDS node

Whether you created a single MGS/MDS node as we did or separate nodes, the next step is to configure the node in the cluster. The following parameters are used:

fsname: Names the file system, for example, LustreFS

mgs: Indicates the node is MGS

mdt: Indicates the node is MDS

backfstype: Identifies the backing file system

To configure the MGS/MDS node, execute the following:

 mkfs.lustre --fsname=LustreFS --mgs --mdt --backfstype=ldiskfs --reformat /dev/sdc
mkdir /mnt/mgsmds
mount -t lustre /dev/sdc /mnt/mgsmds

3. Configure the OSS node

Before adding the OSS node to the Lustre cluster, we implemented RAID level 0 on all the additional disks attached to the machine (10 × 1 TB). RAID 0 provides no fault tolerance, but we selected the locally redundant storage replication option for Azure Storage. Azure provides three-way mirroring on disk, and we wanted to stress-test the file system. We first installed the mdadm package, which allowed us to configure and manage RAID devices in Linux.

To implement RAID 0 on the storage node:

1. Update the system update and install the mdadm package:

 yum clean all && yum update
yum install mdadm –y

2. Verify whether the attached hard drives are detected:

 ls -l /dev | grep sd

3. After the new hard drives are detected, check whether the attached drives already use RAID:
   mdadm --examine /dev/sd[c-l]   
   

4. Create the md (multiple device) device (that is, /dev/md0) and apply the RAID level:

    mdadm -C /dev/md0 -l raid0 -n 10 /dev/sd[c-l]
   

5. After the md device is created, verify the status of the RAID level, devices, and array used:

 cat /proc/mdstat

RAID 0 is now configured on the OSS server. On the node, run the following commands to configure the object storage target (OST):

 mkfs.lustre --fsname=LustreFS --backfstype=ldiskfs --reformat --ost --mgsnode=MGSMDS00 --index=0 /dev/md0
mkdir /mnt/oss
mount -t lustre /dev/md0 /mnt/oss

NOTE: Whenever you add another OSS node to the cluster, increment the index—for example, from 0 to 1.

4. Install Lustre 2.9.0 on the client node and validate the setup

For the client node to work with the Lustre cluster, you must install the required RPM packages and configure the node. For other kernel versions than the one we used, see the Lustre Support Matrix.

1. Log on to the node using a Secure Shell (SSH) client, such as PuTTY.
2. Go to the /etc/yum.repos.d folder and create a file named LustrePackage.repo with the same contents shown earlier for the server node (see “Install Lustre 2.9.0 packages on server nodes,” step 2).
3. Install the RPM packages as follows:

   1. Install the kmod-lustre client package:

       yum install kmod-lustre-client-2.9.0-1.el7.x86_64
      

   2. Install the Lustre client 2.90 client package:

       yum install lustre-client-2.9.0-1.el7.x86_64
      

   3. Install the Lustre client DKMS packages:

 yum install lustre-client-dkms-2.9.0-1.el7.noarch --skip-broken

4. To configure the client node to work with the Lustre cluster, run the following commands:

 mkdir <directory>
mount -t lustre <hostname>@tcp:<filesystem> <directory>

Where:

<directory> is the directory to be mounted with the Lustre file system, such as /mnt/lustre.

<hostname> is the name of the host used for the management server. In our case, MDS and MGS are served by a single node named MGSMDS00.

<filesystem> is the name of the Lustre file system. We specified the name LustreFS earlier while creating the file system (see “Configure MGS/MDS node”).

For example:

 mkdir /mnt/lustre
mount -t lustre MGSMDS00@tcp:/LustreFS /mnt/lustre

5. When the client configuration is complete, validate the Lustre setup as follows:

   1. Display all the nodes attached in the cluster:

       lfs check servers
      

   2. Write a file in the mounted path to see the OST at which that file is located. For example:

       lfs find –obd LustreFS-OST0000_UUID /mnt/lustre
      

      Where LustreFS-OST0000_UUID is UUID of that OST as shown:

      

6. Install the IOR and MDTest tools. See the Appendix (Testing tools).

Lustre file system performance tests

To validate performance of the Lustre file system, we ran tests to measure maximum throughput and IOPs. We changed various IOR test parameters, including the transfer rate, block size, number of processes, and number of client nodes.

Our results were good, but inconclusive, because of the many factors that affected the performance of our system:

• Caching effects: When we measured the I/O performance, we found that file caching defined by default at the OS level caused very high I/O rates. Because we tested the performance of storage nodes, the data was getting buffered in memory, not stored on the disk. As a result, we evaluated the file system without caching except when testing IOPs.
• Transfer size: In our testing, we set the transfer size to 32 MB to achieve maximum throughput, but results could vary in other environments. This parameter controls the amount of data to be transferred each time for a process between memory and file.
• Programming interface: The IOR tool can be used to test the file system for both POSIX (Portable Operating System Interface) and MPI-IO. We saw better results with MPI-IO. The POSIX results are shown later in this section.
• Count of parallel processes: To achieve maximum throughput and IOPs, we varied the number of total parallel processes for different storage nodes. We saw a maximum throughput of 753.53 MB per second with one OSS node with 16 processes.

Maximum throughput test results

To measure read and write throughput, we used the following IOR syntax:

 mpiexec --hosts=<client_hostname> -np <n_procs>  /lustre/software/ior/bin/ior 
    -a MPIIO -v -B  -F -w -t 32m  -b 4G -o /mnt/lustre/test.`date 
    +"%Y-%m-%d_%H-%M-%S"`

Where:

-v indicates verbose mode

-B indicates by passing cache

-F indicates file per process

-w indicates write operation

-t indicates transfer rate (size of transfer in bytes)

-b indicates block size

-o indicates output test file

<client_hostname> is the name of the host used as the client

<n_procs> is the number of processes

Table 1. Maximum throughput results for Lustre file system

Figure 2 presents the write throughput results, with the y-axis showing maximum throughput and the x-axis showing the number of OSS nodes.

Figure 2. Graphical representation of write throughput results

Figure 3 shows how read throughput improves with the number of server nodes. The y-axis shows maximum throughput and the x-axis shows the number of OSS nodes.

Figure 3. Graphical representation of read throughput results

IOPs test results

To measure IOPs, we used the following syntax:

 mpiexec --hosts=<client_hostname> -np <n_procs>  /lustre/software/ior/bin/ior 
    -a MPIIO -v -z  -F –w -r -t 4k  -b 320m -o /mnt/lustre/test.`date 
    +"%Y-%m-%d_%H-%M-%S"`

Where:

-v indicates verbose mode

-z indicates random task ordering

-F indicates file per process

-w indicates write operation

-r indicates read operation

-t indicates transfer rate (size of transfer in bytes)

-b indicates block size

-o indicates output test file

<client_hostname> is the name of the host used as the client

<n_procs> is the number of processes

The results are shown in Table 2.

Table 2. IOPs results for Lustre file system

Figure 4 provides the read IOPs results. The y-axis shows IOPs, and the x-axis shows the count of OSS nodes.

Figure 4 . Write IOPs showing linear scale as nodes are added

Our nonlinear results, shown in Figure 5, were unexpected and most likely related to the caching effect. We ran out of time for further investigation, but we suspect the Lustre caching effects were the culprit.

Figure 5. Read IOPs showing nonlinear scale

Metadata test results

For the metadata operation testing, we used MDTest with the following syntax on the client node:

 mpiexec --hosts=<client_hostname> -np <n_procs> /lustre/software/mdtest/mdtest 
    -I 10 -i 2 -z 5 -b 5 -d /mnt/lustre/

Where:

-I indicates the number of items per directory in the tree

-i indicates iterations

-b indicates block size

-z indicates random task ordering

-d is the directory where the tests are run (multiple paths require fully-qualified pathnames)

Figure 6 shows the MDTest output.

Figure 6 . Sample MDTest output for client host with four processes

Lustre evaluation

Overall, system performance was good, but we noticed a few testing quirks. Here are our observations and conclusions:

• Our best write throughput test was 753.53 MB per second for one storage node out of a maximum allowable throughout of 768 MB per second. We executed test cases for a maximum of 20 storage nodes. When we scaled the nodes, we experienced a linear increase in throughout and IOPs as well.
• If you install Lustre manually, you must make sure to install the correct kernel version and all the updates. If a kernel version changes after you install a version, other system software may be affected.
• For replication, load balancing, and failover, other tools are required. Lustre does not provide these features.
• During performance scaling tests, throughput and IOPs results were low at first. In the second benchmark testing pass, we saw better results with a linear increase in performance as the storage nodes were scaled.
• When we used the IOR commands in our tests, sometimes the commands started to execute within a fraction of seconds. That’s when we got the expected results. If the commands took more time to start, we saw performance issues.
• Some throughput test iterations resulted in below par performance numbers, but subsequent iterations yielded good results.
• To test performance scaling with IOPs, we used the -z parameter (for random access, not sequential) instead of the -B parameter (for passing cache). IOPs increases on scaling the OSS nodes. However, like the throughput commands, if the command took longer to start executing, we noticed that the IOPs also started decreasing.

 

 

Thank you for reading!

This article is also available as an eBook:

• Download the Parallel Virtual File Systems eBook

 

Azure CAT Guidance

"Hands-on solutions, with our heads in the Cloud!"