ID3D12GraphicsCommandList：：ClearDepthStencilView 方法 (d3d12.h)

项目
02/26/2024

清除深度模具资源。

语法

void ClearDepthStencilView(
  [in] D3D12_CPU_DESCRIPTOR_HANDLE DepthStencilView,
  [in] D3D12_CLEAR_FLAGS           ClearFlags,
  [in] FLOAT                       Depth,
  [in] UINT8                       Stencil,
  [in] UINT                        NumRects,
  [in] const D3D12_RECT            *pRects
);

参数

[in] DepthStencilView

类型： D3D12_CPU_DESCRIPTOR_HANDLE

描述 CPU 描述符句柄，该句柄表示要清除深度模具的堆的开头。

[in] ClearFlags

类型： D3D12_CLEAR_FLAGS

使用按位 OR 运算组合的 D3D12_CLEAR_FLAGS 值的组合。生成的值标识要清除 (深度缓冲区和/或模具缓冲区) 数据类型。

[in] Depth

类型： FLOAT

用于清除深度缓冲区的值。此值将固定在 0 和 1 之间。

[in] Stencil

类型： UINT8

用于清除模具缓冲区的值。

[in] NumRects

类型： UINT

pRects 参数指定的数组中的矩形数。

[in] pRects

类型： const D3D12_RECT*

要清除的资源视图中矩形的 D3D12_RECT 结构的数组。如果 为 NULL， 则 ClearDepthStencilView 清除整个资源视图。

返回值

无

备注

只有直接命令列表和捆绑包命令列表支持此操作。

ClearDepthStencilView 可用于初始化为同一堆内存别名的资源。有关更多详细信息，请参阅 CreatePlacedResource 。

运行时验证

对于浮点输入，运行时会将非规范化值设置为 0 (，同时保留 NAN) 。

验证失败将导致调用 Close 返回 E_INVALIDARG。

调试层

如果输入颜色非规范化，调试层将发出错误。

如果视图引用的子资源未处于适当的状态，则调试层将发出错误。对于 ClearDepthStencilView，状态必须处于 D3D12_RESOURCE_STATE_DEPTH_WRITE状态。

示例

D3D12Bundles 示例使用 ID3D12GraphicsCommandList：：ClearDepthStencilView，如下所示：

// Pipeline objects.
D3D12_VIEWPORT m_viewport;
ComPtr<IDXGISwapChain3> m_swapChain;
ComPtr<ID3D12Device> m_device;
ComPtr<ID3D12Resource> m_renderTargets[FrameCount];
ComPtr<ID3D12Resource> m_depthStencil;
ComPtr<ID3D12CommandAllocator> m_commandAllocator;
ComPtr<ID3D12GraphicsCommandList> m_commandList;
ComPtr<ID3D12CommandQueue> m_commandQueue;
ComPtr<ID3D12RootSignature >m_rootSignature;
ComPtr<ID3D12DescriptorHeap> m_rtvHeap;
ComPtr<ID3D12DescriptorHeap> m_cbvSrvHeap;
ComPtr<ID3D12DescriptorHeap> m_dsvHeap;
ComPtr<ID3D12DescriptorHeap> m_samplerHeap;
ComPtr<ID3D12PipelineState> m_pipelineState1;
ComPtr<ID3D12PipelineState> m_pipelineState2;
D3D12_RECT m_scissorRect;

void D3D12Bundles::PopulateCommandList(FrameResource* pFrameResource)
{
    // Command list allocators can only be reset when the associated
    // command lists have finished execution on the GPU; apps should use
    // fences to determine GPU execution progress.
    ThrowIfFailed(m_pCurrentFrameResource->m_commandAllocator->Reset());

    // However, when ExecuteCommandList() is called on a particular command
    // list, that command list can then be reset at any time and must be before
    // re-recording.
    ThrowIfFailed(m_commandList->Reset(m_pCurrentFrameResource->m_commandAllocator.Get(), m_pipelineState1.Get()));

    // Set necessary state.
    m_commandList->SetGraphicsRootSignature(m_rootSignature.Get());

    ID3D12DescriptorHeap* ppHeaps[] = { m_cbvSrvHeap.Get(), m_samplerHeap.Get() };
    m_commandList->SetDescriptorHeaps(_countof(ppHeaps), ppHeaps);

    m_commandList->RSSetViewports(1, &m_viewport);
    m_commandList->RSSetScissorRects(1, &m_scissorRect);

    // Indicate that the back buffer will be used as a render target.
    m_commandList->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_PRESENT, D3D12_RESOURCE_STATE_RENDER_TARGET));

    CD3DX12_CPU_DESCRIPTOR_HANDLE rtvHandle(m_rtvHeap->GetCPUDescriptorHandleForHeapStart(), m_frameIndex, m_rtvDescriptorSize);
    CD3DX12_CPU_DESCRIPTOR_HANDLE dsvHandle(m_dsvHeap->GetCPUDescriptorHandleForHeapStart());
    m_commandList->OMSetRenderTargets(1, &rtvHandle, FALSE, &dsvHandle);

    // Record commands.
    const float clearColor[] = { 0.0f, 0.2f, 0.4f, 1.0f };
    m_commandList->ClearRenderTargetView(rtvHandle, clearColor, 0, nullptr);
    m_commandList->ClearDepthStencilView(m_dsvHeap->GetCPUDescriptorHandleForHeapStart(), D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    if (UseBundles)
    {
        // Execute the prebuilt bundle.
        m_commandList->ExecuteBundle(pFrameResource->m_bundle.Get());
    }
    else
    {
        // Populate a new command list.
        pFrameResource->PopulateCommandList(m_commandList.Get(), m_pipelineState1.Get(), m_pipelineState2.Get(), m_currentFrameResourceIndex, m_numIndices, &m_indexBufferView,
            &m_vertexBufferView, m_cbvSrvHeap.Get(), m_cbvSrvDescriptorSize, m_samplerHeap.Get(), m_rootSignature.Get());
    }

    // Indicate that the back buffer will now be used to present.
    m_commandList->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_RENDER_TARGET, D3D12_RESOURCE_STATE_PRESENT));

    ThrowIfFailed(m_commandList->Close());
}

D3D12Multithreading 示例使用 ID3D12GraphicsCommandList：：ClearDepthStencilView，如下所示：

void FrameResource::Init()
{
    // Reset the command allocators and lists for the main thread.
    for (int i = 0; i < CommandListCount; i++)
    {
        ThrowIfFailed(m_commandAllocators[i]->Reset());
        ThrowIfFailed(m_commandLists[i]->Reset(m_commandAllocators[i].Get(), m_pipelineState.Get()));
    }

    // Clear the depth stencil buffer in preparation for rendering the shadow map.
    m_commandLists[CommandListPre]->ClearDepthStencilView(m_shadowDepthView, D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    // Reset the worker command allocators and lists.
    for (int i = 0; i < NumContexts; i++)
    {
        ThrowIfFailed(m_shadowCommandAllocators[i]->Reset());
        ThrowIfFailed(m_shadowCommandLists[i]->Reset(m_shadowCommandAllocators[i].Get(), m_pipelineStateShadowMap.Get()));

        ThrowIfFailed(m_sceneCommandAllocators[i]->Reset());
        ThrowIfFailed(m_sceneCommandLists[i]->Reset(m_sceneCommandAllocators[i].Get(), m_pipelineState.Get()));
    }
}

// Assemble the CommandListPre command list.
void D3D12Multithreading::BeginFrame()
{
    m_pCurrentFrameResource->Init();

    // Indicate that the back buffer will be used as a render target.
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_PRESENT, D3D12_RESOURCE_STATE_RENDER_TARGET));

    // Clear the render target and depth stencil.
    const float clearColor[] = { 0.0f, 0.0f, 0.0f, 1.0f };
    CD3DX12_CPU_DESCRIPTOR_HANDLE rtvHandle(m_rtvHeap->GetCPUDescriptorHandleForHeapStart(), m_frameIndex, m_rtvDescriptorSize);
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ClearRenderTargetView(rtvHandle, clearColor, 0, nullptr);
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ClearDepthStencilView(m_dsvHeap->GetCPUDescriptorHandleForHeapStart(), D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    ThrowIfFailed(m_pCurrentFrameResource->m_commandLists[CommandListPre]->Close());
}

// Assemble the CommandListMid command list.
void D3D12Multithreading::MidFrame()
{
    // Transition our shadow map from the shadow pass to readable in the scene pass.
    m_pCurrentFrameResource->SwapBarriers();

    ThrowIfFailed(m_pCurrentFrameResource->m_commandLists[CommandListMid]->Close());
}

请参阅 Direct3D 12 参考中的示例代码。

要求

要求	值
目标平台	Windows
标头	d3d12.h
Library	D3d12.lib
DLL	D3d12.dll

另请参阅

ID3D12GraphicsCommandList

通过

ID3D12GraphicsCommandList：：ClearDepthStencilView 方法 (d3d12.h)

语法

参数

返回值

备注

运行时验证

调试层

示例

要求

另请参阅

反馈

其他资源