Event ID 1077 — IP Address Resource Availability
Applies To: Windows Server 2008
.jpg)
In a cluster, an IP Address resource is important because in most cases, other resources (such as a Network Name resource) depend on it. An IP Address resource can come online only if it is configured correctly, and is supported correctly by available networks and network configurations.
Event Details
| Product: | Windows Operating System |
| ID: | 1077 |
| Source: | Microsoft-Windows-FailoverClustering |
| Version: | 6.0 |
| Symbolic Name: | RES_IPADDR_IPV4_ADDRESS_INTERFACE_FAILED |
| Message: | Health check for IP interface '%1' (address '%2') failed (status is '%3'). Run the Validate a Configuration wizard to ensure that the network adapter is functioning properly. |
Resolve
Check network adapter
The health check for an IP interface failed. If you do not currently have Event Viewer open, see "Opening Event Viewer and viewing events related to failover clustering." After reviewing event messages, choose actions that apply to your situation:
- Check to see if other IP Address resources on the same network failed; this would indicate failure of the network adapter. If necessary, replace the adapter.
- Check to make sure the proper adapter driver is loaded for the device and check for newer versions of the driver.
- For a given IP Address resource, make sure that NetBIOS is enabled only if you need it to be enabled.
- As a further check, you can run the Network tests in the Validate a Configuration Wizard. For more information, see "Using the Validate a Configuration Wizard to review the network configuration."
To perform the following procedures, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority.
Using the Validate a Configuration Wizard to review the network configuration
To use the Validate a Configuration Wizard to review the network configuration:
- To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
- In the Failover Cluster Management snap-in, in the console tree, make sure Failover Cluster Management is selected. Then under Management, click Validate a Configuration.
- Follow the instructions in the wizard to specify the cluster you want to test.
- On the Testing Options page, select Run only tests I select.
- On the Test Selection page, clear the check boxes for System Configuration and Storage. This leaves only the tests for Network and Inventory. You can run all these tests, or you can select only the specific tests that appear relevant to your situation.
- Follow the instructions in the wizard to run the tests.
- On the Summary page, click View Report.
Opening Event Viewer and viewing events related to failover clustering
To open Event Viewer and view events related to failover clustering:
- If Server Manager is not already open, click Start, click Administrative Tools, and then click Server Manager. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
- In the console tree, expand Diagnostics, expand Event Viewer, expand Windows Logs, and then click System.
- To filter the events so that only events with a Source of FailoverClustering are shown, in the Actions pane, click Filter Current Log. On the Filter tab, in the Event sources box, select FailoverClustering. Select other options as appropriate, and then click OK.
- To sort the displayed events by date and time, in the center pane, click the Date and Time column heading.
Verify
To perform the following procedures, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority.
Verifying that an IP Address resource can come online
To verify that an IP Address resource can come online:
- To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
- In the Failover Cluster Management snap-in, if the cluster you want to manage is not displayed, in the console tree, right-click Failover Cluster Management, click Manage a Cluster, and then select or specify the cluster that you want.
- If the console tree is collapsed, expand the tree under the cluster you want to manage, and then expand Services and Applications.
- In the console tree, click a clustered service or application.
- In the center pane, expand the Name listing for the clustered service or application that uses the IP Address resource that you want to verify. View the status of the IP Address resource.
- If an IP Address resource is offline, to bring it online, right-click the resource and then click Bring this resource online.
To perform a quick check on the status of a resource, you can run the following command.
Using a command to check the status of a resource in a failover cluster
To use a command to check the status of a resource in a failover cluster:
On a node in the cluster, click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type:
CLUSTER RESOURCE ResourceName /STATUS
If you run the preceding command without specifying a resource name, status is displayed for all resources in the cluster.