Command Line Parameters for the DVR Engine Functionality Tests (Windows Embedded CE 6.0)
1/6/2010
For more information about how to edit the command line for a test, see Editing the Command-Line for a Test.
The following table shows the optional command line parameters for the DVR Engine Functionality Tests.
| Command line parameter | Description |
|---|---|
-x test_case_ID |
Specifies which test case to run. |
/? |
Outputs the command line options. |
/SinkUserSourceguid |
Required GUID for the tuner source filter, which provides the input MPEG2 stream. |
/SinkASyncSource |
Internally used option for simulating input MPEG2 video streams. |
/SinkFileSource |
Internally used option for simulating input MPEG2 video streams. |
/SinkRecordLocationpath |
Path for adjusting the record location for the DVREngine. This defaults to \hard disk2\. Adjust this to point to your DVR file storage location. |
/SourceTestGraph |
Internally used option for testing the DVR engine. |
/RenderVBI |
Used to indicate whether the Vertical Blanking Interval data should be connected to the DVREngine input. This is used for parental control options. |
/SourceDecoderguid |
Required GUID for the MPEG2 decoder filter, which is used to decode the MPEG2 data for rendering. |
/SourceDVRFilefile |
The name of a set of .dvr-dat and .dvr-idx files which contain a short DVR program for testing. You can acquire this by using your DVR application, or saving a DVR recording from one of the DVR BVT tests. |
/SourceVideoPath |
The path to the dvr file specified by the /SourceDVRFile. |