通过

Resume State (Windows Embedded CE 6.0)

  • 项目

1/5/2010

When a resume occurs the kernel is the first to execute. A device will only resume from a halted state if an interrupt occurs and the CPU has been programmed to wake when an interrupt occurs.

Procedures

To resume a device

  1. The kernel performs the following clean-up tasks before resuming normal scheduling:

    • If this is an SHx, it calls OEMFlushCache.
    • Calls InitClock to re-initialize timer hardware to a 1 ms tick.
    • Calls Filesys.exe with a power on notification.
    • Calls GWES with a power on notification.
    • Initializes the KITL interrupt if one is in use.

  2. Power manager then calls FileSystemPowerFunction with the (FSNOTIFY_POWER_ON) argument.

  3. On the resume, GWES performs the following tasks:

    • Restores video memory from RAM.
    • Powers on the Window Manager.
    • Sets the screen contrast.
    • Shows the Startup UI screen, if required.
    • Posts a message to the Taskbar to tell it the device has resumed by send a WM_POWERBROADCAST message with PBT_APMRESUMESUSPEND parameter.
    • Sends the same message to the User notification subsystem.
    • Triggers applications that have requested to be triggered on resume.

See Also

Concepts

Kernel States