你当前正在访问 Microsoft Azure Global Edition 技术文档网站。 如果需要访问由世纪互联运营的 Microsoft Azure 中国技术文档网站，请访问 https://docs.azure.cn。
Remove-AzIntegrationAccountReceivedIcn
This cmdlet removes a specific received interchange control number per agreement and control number value.
Syntax
Remove-AzIntegrationAccountReceivedIcn
-ResourceGroupName <String>
-Name <String>
-AgreementName <String>
-ControlNumberValue <String>
[-AgreementType <String>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
This cmdlet is meant to be used in disaster recovery scenarios to remove a received interchange control number from the integration account so that the B2B connector may process again the message when duplicate number detection is enabled. In rare occasions the received interchange control number may be reserved shortly before a disaster and before the B2B connector rejects the interchange as erroneous. In such occasions the operation may want to enable the recovery site to process again the same interchange after its payload is corrected. Please do provide the "-AgreementType" parameter to specify whether X12 or Edifact control numbers to return
Examples
Example 1
Get-AzIntegrationAccountReceivedIcn -AgreementType "X12" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "X12AgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn : The existing received control number '000000641' for agreement 'X12AgreementName' is not in a valid format.
At line:1 char:1
+ Get-AzIntegrationAccountReceivedIcn -ResourceGroupName "groupName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Get-AzIntegrationAccountReceivedIcn], PSInvalidOperationException
+ FullyQualifiedErrorId : Microsoft.Azure.Commands.LogicApp.Cmdlets.GetAzureIntegrationAccountReceivedIcnCommand
Remove-AzIntegrationAccountReceivedIcn -AgreementType "X12" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "X12AgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn -AgreementType "X12" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "X12AgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn : The session 'X12-ICN-X12AgreementName-000000641' could not be found in integration account 'accountName'.
At line:1 char:1
+ Get-AzIntegrationAccountReceivedIcn -ResourceGroupName "groupName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Get-AzIntegrationAccountReceivedIcn], CloudException
+ FullyQualifiedErrorId : Microsoft.Azure.Commands.LogicApp.Cmdlets.GetAzureIntegrationAccountReceivedIcnCommandAttempts to get a received X12 interchange control number which content is not in a valid format. Removes the received X12 interchange control number. Confirms the received X12 interchange control number was removed by attempting to get it again.
Example 2
Get-AzIntegrationAccountReceivedIcn -AgreementType "Edifact" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "EdifactAgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn : The existing received control number '000000641' for agreement 'EdifactAgreementName' is not in a valid format.
At line:1 char:1
+ Get-AzIntegrationAccountReceivedIcn -ResourceGroupName "groupName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Get-AzIntegrationAccountReceivedIcn], PSInvalidOperationException
+ FullyQualifiedErrorId : Microsoft.Azure.Commands.LogicApp.Cmdlets.GetAzureIntegrationAccountReceivedIcnCommand
Remove-AzIntegrationAccountReceivedIcn -AgreementType "Edifact" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "EdifactAgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn -AgreementType "Edifact" -ResourceGroupName "groupName" -Name "accountName" -AgreementName "EdifactAgreementName" -ControlNumberValue "000000641"
Get-AzIntegrationAccountReceivedIcn : The session 'Edifact-ICN-EdifactAgreementName-000000641' could not be found in integration account 'accountName'.
At line:1 char:1
+ Get-AzIntegrationAccountReceivedIcn -ResourceGroupName "groupName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Get-AzIntegrationAccountReceivedIcn], CloudException
+ FullyQualifiedErrorId : Microsoft.Azure.Commands.LogicApp.Cmdlets.GetAzureIntegrationAccountReceivedIcnCommandAttempts to get a received Edifact interchange control number which content is not in a valid format. Removes the received Edifact interchange control number. Confirms the received Edifact interchange control number was removed by attempting to get it again.
Parameters
-AgreementName
The integration account agreement name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AgreementType
The integration account agreement type.
| Type: | String |
| Aliases: | MessageType |
| Accepted values: | X12, Edifact |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ControlNumberValue
The integration account control number value.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
The integration account name.
| Type: | String |
| Aliases: | IntegrationAccountName, ResourceName |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ResourceGroupName
The integration account resource group name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
