通过

steps.pwsh 定义

  • 项目

此步骤 pwsh 在 Windows、macOS 和 Linux 上的 PowerShell Core 中运行脚本。

steps:
- pwsh: string # Required as first property. Inline PowerShell script.
  errorActionPreference: string # Unless otherwise specified, the error action preference defaults to the value stop. See the following section for more information.
  failOnStderr: string # Fail the task if output is sent to Stderr?
  ignoreLASTEXITCODE: string # Check the final exit code of the script to determine whether the step succeeded?
  workingDirectory: string # Start the script with this working directory.
  condition: string # Evaluate this condition expression to determine whether to run this task.
  continueOnError: boolean # Continue running even on failure?
  displayName: string # Human-readable name for the task.
  target: string | target # Environment in which to run this task.
  enabled: boolean # Run this task when the job runs?
  env: # Variables to map into the process's environment.
    string: string # Name/value pairs
  name: string # ID of the step.
  timeoutInMinutes: string # Time to wait for this task to complete before the server kills it.
  retryCountOnTaskFailure: string # Number of retries if the task fails.

steps:
- pwsh: string # Required as first property. Inline PowerShell script.
  errorActionPreference: string # Unless otherwise specified, the error action preference defaults to the value stop. See the following section for more information.
  failOnStderr: string # Fail the task if output is sent to Stderr?
  ignoreLASTEXITCODE: string # Check the final exit code of the script to determine whether the step succeeded?
  workingDirectory: string # Start the script with this working directory.
  condition: string # Evaluate this condition expression to determine whether to run this task.
  continueOnError: boolean # Continue running even on failure?
  displayName: string # Human-readable name for the task.
  target: string | target # Environment in which to run this task.
  enabled: boolean # Run this task when the job runs?
  env: # Variables to map into the process's environment.
    string: string # Name/value pairs
  name: string # ID of the step.
  timeoutInMinutes: string # Time to wait for this task to complete before the server kills it.

steps:
- pwsh: string # Required as first property. Inline PowerShell script.
  errorActionPreference: string # Unless otherwise specified, the error action preference defaults to the value stop. See the following section for more information.
  failOnStderr: string # Fail the task if output is sent to Stderr?
  ignoreLASTEXITCODE: string # Check the final exit code of the script to determine whether the step succeeded?
  workingDirectory: string # Start the script with this working directory.
  condition: string # Evaluate this condition expression to determine whether to run this task.
  continueOnError: boolean # Continue running even on failure?
  displayName: string # Human-readable name for the task.
  enabled: boolean # Run this task when the job runs?
  env: # Variables to map into the process's environment.
    string: string # Name/value pairs
  name: string # ID of the step.
  timeoutInMinutes: string # Time to wait for this task to complete before the server kills it.

引用此定义的定义： 步骤

属性

pwsh 字符串。 作为第一个属性是必需的。
内联 PowerShell 脚本。

errorActionPreference 字符串。
除非另行指定，否则错误操作首选项默认为值停止。 有关详细信息，请参阅下一节。

failOnStderr 字符串。
如果输出发送到 Stderr，则任务失败？

ignoreLASTEXITCODE 字符串。
检查脚本的最终退出代码以确定步骤是否成功？

workingDirectory 字符串。
使用此工作目录启动脚本。

condition 字符串。
计算此条件表达式以确定是否运行此任务。

continueOnError布尔值。
即使发生故障，仍要继续运行？

displayName 字符串。
任务的用户可读名称。

targettarget。
要在其中运行此任务的环境。

enabled布尔值。
在作业运行时运行此任务？

env 字符串字典。
要映射到进程的环境的变量。

name 字符串。
步骤的 ID。 可接受的值：[-_A-Za-z0-9]*。

timeoutInMinutes 字符串。
在服务器终止此任务之前等待此任务完成的时间。

注意

管道可以配置作业级别超时。 如果作业级别超时间隔在步骤完成之前已过，则正在运行的作业 (包括步骤) 也会终止，即使该步骤配置了较长 timeoutInMinutes 的间隔也是如此。 有关详细信息，请参阅 超时。

retryCountOnTaskFailure 字符串。
如果任务失败，则重试次数。

注解

当该任务的 pwsh 值设置为 true 时，pwsh 关键字是 PowerShell 任务的快捷方式。 该任务在 Windows、macOS 和 Linux 上的 PowerShell Core 中运行脚本。

详细了解条件和超时。

每个 PowerShell 会话的持续时间就是其运行时所在的作业的持续时间。 依赖于被启动项的任务必须与启动位于同一作业中。

示例

steps:
- pwsh: Write-Host Hello $($env:name)
  displayName: Say hello
  name: firstStep
  workingDirectory: $(build.sourcesDirectory)
  failOnStderr: true
  env:
    name: Microsoft

另请参阅