Tutorial: Route network traffic with a route table

บทความ
11/12/2024

Azure routes traffic between all subnets within a virtual network, by default. You can create your own routes to override Azure's default routing. Custom routes are helpful when, for example, you want to route traffic between subnets through a network virtual appliance (NVA).

In this tutorial, you learn how to:

Create a virtual network and subnets
Create an NVA that routes traffic
Deploy virtual machines (VMs) into different subnets
Create a route table
Create a route
Associate a route table to a subnet
Route traffic from one subnet to another through an NVA

Prerequisites

An Azure account with an active subscription. You can create an account for free.

An Azure account with an active subscription. You can create an account for free.

Azure Cloud Shell

Azure hosts Azure Cloud Shell, an interactive shell environment that you can use through your browser. You can use either Bash or PowerShell with Cloud Shell to work with Azure services. You can use the Cloud Shell preinstalled commands to run the code in this article, without having to install anything on your local environment.

To start Azure Cloud Shell:

Option	Example/Link
Select Try It in the upper-right corner of a code or command block. Selecting Try It doesn't automatically copy the code or command to Cloud Shell.
Go to https://shell.azure.com, or select the Launch Cloud Shell button to open Cloud Shell in your browser.
Select the Cloud Shell button on the menu bar at the upper right in the Azure portal.

To use Azure Cloud Shell:

Start Cloud Shell.
Select the Copy button on a code block (or command block) to copy the code or command.
Paste the code or command into the Cloud Shell session by selecting Ctrl+Shift+V on Windows and Linux, or by selecting Cmd+Shift+V on macOS.
Select Enter to run the code or command.

If you choose to install and use PowerShell locally, this article requires the Azure PowerShell module version 1.0.0 or later. Run Get-Module -ListAvailable Az to find the installed version. If you need to upgrade, see Install Azure PowerShell module. If you're running PowerShell locally, you also need to run Connect-AzAccount to create a connection with Azure.

Create subnets

A DMZ and Private subnet are needed for this tutorial. The DMZ subnet is where you deploy the NVA, and the Private subnet is where you deploy the virtual machines that you want to route traffic to. The subnet-1 is the subnet created in the previous steps. Use subnet-1 for the public virtual machine.

Create a virtual network and an Azure Bastion host

The following procedure creates a virtual network with a resource subnet, an Azure Bastion subnet, and a Bastion host:

In the portal, search for and select Virtual networks.
On the Virtual networks page, select + Create.

On the Basics tab of Create virtual network, enter, or select the following information:

Setting	Value
Project details
Subscription	Select your subscription.
Resource group	Select Create new. Enter test-rg for the name. Select OK.
Instance details
Name	Enter vnet-1.
Region	Select East US 2.

Screenshot of the Basics tab for creating a virtual network in the Azure portal.

Select Next to proceed to the Security tab.
In the Azure Bastion section, select Enable Azure Bastion.

Bastion uses your browser to connect to VMs in your virtual network over Secure Shell (SSH) or Remote Desktop Protocol (RDP) by using their private IP addresses. The VMs don't need public IP addresses, client software, or special configuration. For more information, see What is Azure Bastion?.

Note

Hourly pricing starts from the moment that Bastion is deployed, regardless of outbound data usage. For more information, see Pricing and SKUs. If you're deploying Bastion as part of a tutorial or test, we recommend that you delete this resource after you finish using it.
In Azure Bastion, enter or select the following information:

Setting Value

Azure Bastion host name Enter bastion.

Azure Bastion public IP address Select Create a public IP address.
Enter public-ip-bastion in Name.
Select OK.
Select Next to proceed to the IP Addresses tab.
In the address space box in Subnets, select the default subnet.

Setting	Value
Azure Bastion host name	Enter bastion.
Azure Bastion public IP address	Select Create a public IP address. Enter public-ip-bastion in Name. Select OK.

In Edit subnet, enter or select the following information:

Setting	Value
Subnet purpose	Leave the default of Default.
Name	Enter subnet-1.
IPv4
IPv4 address range	Leave the default of 10.0.0.0/16.
Starting address	Leave the default of 10.0.0.0.
Size	Leave the default of /24 (256 addresses).

Select Save.
Select Review + create at the bottom of the window. When validation passes, select Create.

In the search box at the top of the portal, enter Virtual network. Select Virtual networks in the search results.
In Virtual networks, select vnet-1.
In vnet-1, select Subnets from the Settings section.
In the virtual network's subnet list, select + Subnet.

In Add subnet, enter or select the following information:

Setting	Value
Subnet purpose	Leave the default of Default.
Name	Enter subnet-private.
IPv4
IPv4 address range	Leave the default of 10.0.0.0/16.
Starting address	Enter 10.0.2.0.
Size	Leave the default of /24 (256 addresses).

Screenshot of private subnet creation in virtual network.

Select Add.
Select + Subnet.

In Add subnet, enter or select the following information:

Setting	Value
Subnet purpose	Leave the default of Default.
Name	Enter subnet-dmz.
IPv4
IPv4 address range	Leave the default of 10.0.0.0/16.
Starting address	Enter 10.0.3.0.
Size	Leave the default of /24 (256 addresses).

Screenshot of DMZ subnet creation in virtual network.

Select Add.

Create a resource group with New-AzResourceGroup. The following example creates a resource group named test-rg for all resources created in this article.

$rg = @{
    ResourceGroupName = "test-rg"
    Location = "EastUS2"
}
New-AzResourceGroup @rg

Create a virtual network with New-AzVirtualNetwork. The following example creates a virtual network named vnet-1 with the address prefix 10.0.0.0/16.

$vnet = @{
    ResourceGroupName = "test-rg"
    Location = "EastUS2"
    Name = "vnet-1"
    AddressPrefix = "10.0.0.0/16"
}

$virtualNetwork = New-AzVirtualNetwork @vnet

Create four subnets by creating four subnet configurations with New-AzVirtualNetworkSubnetConfig. The following example creates four subnet configurations for Public, Private, DMZ, and Azure Bastion subnets.

$subnetConfigPublicParams = @{
    Name = "subnet-1"
    AddressPrefix = "10.0.0.0/24"
    VirtualNetwork = $virtualNetwork
}

$subnetConfigBastionParams = @{
    Name = "AzureBastionSubnet"
    AddressPrefix = "10.0.1.0/24"
    VirtualNetwork = $virtualNetwork
}

$subnetConfigPrivateParams = @{
    Name = "subnet-private"
    AddressPrefix = "10.0.2.0/24"
    VirtualNetwork = $virtualNetwork
}

$subnetConfigDmzParams = @{
    Name = "subnet-dmz"
    AddressPrefix = "10.0.3.0/24"
    VirtualNetwork = $virtualNetwork
}

$subnetConfigPublic = Add-AzVirtualNetworkSubnetConfig @subnetConfigPublicParams
$subnetConfigBastion = Add-AzVirtualNetworkSubnetConfig @subnetConfigBastionParams
$subnetConfigPrivate = Add-AzVirtualNetworkSubnetConfig @subnetConfigPrivateParams
$subnetConfigDmz = Add-AzVirtualNetworkSubnetConfig @subnetConfigDmzParams

Write the subnet configurations to the virtual network with Set-AzVirtualNetwork, which creates the subnets in the virtual network:

$virtualNetwork | Set-AzVirtualNetwork

Create Azure Bastion

Create a public IP address for the Azure Bastion host with New-AzPublicIpAddress. The following example creates a public IP address named public-ip-bastion in the vnet-1 virtual network.

$publicIpParams = @{
    ResourceGroupName = "test-rg"
    Name = "public-ip-bastion"
    Location = "EastUS2"
    AllocationMethod = "Static"
    Sku = "Standard"
}
New-AzPublicIpAddress @publicIpParams

Create an Azure Bastion host with New-AzBastion. The following example creates an Azure Bastion host named bastion in the AzureBastionSubnet subnet of the vnet-1 virtual network. Azure Bastion is used to securely connect Azure virtual machines without exposing them to the public internet.

$bastionParams = @{
    ResourceGroupName = "test-rg"
    Name = "bastion"
    VirtualNetworkName = "vnet-1"
    PublicIpAddressName = "public-ip-bastion"
    PublicIpAddressRgName = "test-rg"
    VirtualNetworkRgName = "test-rg"
}
New-AzBastion @bastionParams -AsJob

Create a resource group with az group create for all resources created in this article.

# Create a resource group.
az group create \
    --name test-rg \
    --location eastus2

Create a virtual network with one subnet with az network vnet create.

az network vnet create \
    --name vnet-1 \
    --resource-group test-rg \
    --address-prefix 10.0.0.0/16 \
    --subnet-name subnet-1 \
    --subnet-prefix 10.0.0.0/24

Create two more subnets with az network vnet subnet create.

# Create a bastion subnet.
az network vnet subnet create \
    --vnet-name vnet-1 \
    --resource-group test-rg \
    --name AzureBastionSubnet \
    --address-prefix 10.0.1.0/24

# Create a private subnet.
az network vnet subnet create \
    --vnet-name vnet-1 \
    --resource-group test-rg \
    --name subnet-private \
    --address-prefix 10.0.2.0/24

# Create a DMZ subnet.
az network vnet subnet create \
    --vnet-name vnet-1 \
    --resource-group test-rg \
    --name subnet-dmz \
    --address-prefix 10.0.3.0/24

Create Azure Bastion

Create a public IP address for the Azure Bastion host with az network public-ip create. The following example creates a public IP address named public-ip-bastion in the vnet-1 virtual network.

az network public-ip create \
    --resource-group test-rg \
    --name public-ip-bastion \
    --location eastus2 \
    --allocation-method Static \
    --sku Standard

Create an Azure Bastion host with az network bastion create. The following example creates an Azure Bastion host named bastion in the AzureBastionSubnet subnet of the vnet-1 virtual network. Azure Bastion is used to securely connect Azure virtual machines without exposing them to the public internet.

az network bastion create \
    --resource-group test-rg \
    --name bastion \
    --vnet-name vnet-1 \
    --public-ip-address public-ip-bastion \
    --location eastus2
    --no-wait

Create an NVA virtual machine

Network virtual appliances (NVAs) are virtual machines that help with network functions, such as routing and firewall optimization. In this section, create an NVA using an Ubuntu 24.04 virtual machine.

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
Select + Create then Azure virtual machine.

In Create a virtual machine enter or select the following information in the Basics tab:

Setting	Value
Project details
Subscription	Select your subscription.
Resource group	Select test-rg.
Instance details
Virtual machine name	Enter vm-nva.
Region	Select (US) East US 2.
Availability options	Select No infrastructure redundancy required.
Security type	Select Standard.
Image	Select Ubuntu Server 24.04 LTS - x64 Gen2.
VM architecture	Leave the default of x64.
Size	Select a size.
Administrator account
Authentication type	Select Password.
Username	Enter a username.
Password	Enter a password.
Confirm password	Reenter password.
Inbound port rules
Public inbound ports	Select None.

Select Next: Disks then Next: Networking.

In the Networking tab, enter or select the following information:

Setting	Value
Network interface
Virtual network	Select vnet-1.
Subnet	Select subnet-dmz (10.0.3.0/24).
Public IP	Select None.
NIC network security group	Select Advanced.
Configure network security group	Select Create new. In Name enter nsg-nva. Select OK.

Leave the rest of the options at the defaults and select Review + create.
Select Create.

Create the VM with New-AzVM. The following example creates a VM named vm-nva.

# Create a credential object
$cred = Get-Credential

# Define the VM parameters
$vmParams = @{
    ResourceGroupName = "test-rg"
    Location = "EastUS2"
    Name = "vm-nva"
    ImageName = "Canonical:ubuntu-24_04-lts:server-gen1:latest"
    Size = "Standard_DS1_v2"
    Credential = $cred
    VirtualNetworkName = "vnet-1"
    SubnetName = "subnet-dmz"
    PublicIpAddressName = $null  # No public IP address
}

# Create the VM
New-AzVM @vmParams

Create a VM to be used as the NVA in the subnet-dmz subnet with az vm create.

az vm create \
    --resource-group test-rg \
    --name vm-nva \
    --image Ubuntu2204 \
    --public-ip-address "" \
    --subnet subnet-dmz \
    --vnet-name vnet-1 \
    --admin-username azureuser \
    --authentication-type password

The VM takes a few minutes to create. Don't continue to the next step until Azure finishes creating the VM and returns output about the VM.

Create public and private virtual machines

Create two virtual machines in the vnet-1 virtual network. One virtual machine is in the subnet-1 subnet, and the other virtual machine is in the subnet-private subnet. Use the same virtual machine image for both virtual machines.

Create public virtual machine

The public virtual machine is used to simulate a machine in the public internet. The public and private virtual machine are used to test the routing of network traffic through the NVA virtual machine.

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
Select + Create then Azure virtual machine.

In Create a virtual machine enter or select the following information in the Basics tab:

Setting	Value
Project details
Subscription	Select your subscription.
Resource group	Select test-rg.
Instance details
Virtual machine name	Enter vm-public.
Region	Select (US) East US 2.
Availability options	Select No infrastructure redundancy required.
Security type	Select Standard.
Image	Select Ubuntu Server 24.04 LTS - x64 Gen2.
VM architecture	Leave the default of x64.
Size	Select a size.
Administrator account
Authentication type	Select Password.
Username	Enter a username.
Password	Enter a password.
Confirm password	Reenter password.
Inbound port rules
Public inbound ports	Select None.

Select Next: Disks then Next: Networking.
In the Networking tab, enter or select the following information:

Setting Value

Network interface

Virtual network Select vnet-1.

Subnet Select subnet-1 (10.0.0.0/24).

Public IP Select None.

NIC network security group Select None.
Leave the rest of the options at the defaults and select Review + create.
Select Create.

Create private virtual machine

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
Select + Create then Azure virtual machine.

In Create a virtual machine enter or select the following information in the Basics tab:

Setting	Value
Project details
Subscription	Select your subscription.
Resource group	Select test-rg.
Instance details
Virtual machine name	Enter vm-private.
Region	Select (US) East US 2.
Availability options	Select No infrastructure redundancy required.
Security type	Select Standard.
Image	Select Ubuntu Server 24.04 LTS - x64 Gen2.
VM architecture	Leave the default of x64.
Size	Select a size.
Administrator account
Authentication type	Select Password.
Username	Enter a username.
Password	Enter a password.
Confirm password	Reenter password.
Inbound port rules
Public inbound ports	Select None.

Select Next: Disks then Next: Networking.
In the Networking tab, enter or select the following information:

Setting Value

Network interface

Virtual network Select vnet-1.

Subnet Select subnet-private (10.0.2.0/24).

Public IP Select None.

NIC network security group Select None.
Leave the rest of the options at the defaults and select Review + create.
Select Create.

Create a VM in the subnet-1 subnet with New-AzVM. The following example creates a VM named vm-public in the subnet-public subnet of the vnet-1 virtual network.

# Create a credential object
$cred = Get-Credential

# Define the VM parameters
$vmParams = @{
    ResourceGroupName = "test-rg"
    Location = "EastUS2"
    Name = "vm-public"
    ImageName = "Canonical:ubuntu-24_04-lts:server-gen1:latest"
    Size = "Standard_DS1_v2"
    Credential = $cred
    VirtualNetworkName = "vnet-1"
    SubnetName = "subnet-1"
    PublicIpAddressName = $null  # No public IP address
}

# Create the VM
New-AzVM @vmParams

Create a VM in the subnet-private subnet.

# Create a credential object
$cred = Get-Credential

# Define the VM parameters
$vmParams = @{
    ResourceGroupName = "test-rg"
    Location = "EastUS2"
    Name = "vm-private"
    ImageName = "Canonical:ubuntu-24_04-lts:server-gen1:latest"
    Size = "Standard_DS1_v2"
    Credential = $cred
    VirtualNetworkName = "vnet-1"
    SubnetName = "subnet-private"
    PublicIpAddressName = $null  # No public IP address
}

# Create the VM
New-AzVM @vmParams

The VM takes a few minutes to create. Don't continue with the next step until the VM is created and Azure returns output to PowerShell.

Create a VM in the subnet-1 subnet with az vm create. The --no-wait parameter enables Azure to execute the command in the background so you can continue to the next command.

az vm create \
    --resource-group test-rg \
    --name vm-public \
    --image Ubuntu2204 \
    --vnet-name vnet-1 \
    --subnet subnet-1 \
    --public-ip-address "" \
    --admin-username azureuser \
    --authentication-type password \
    --no-wait

Create a VM in the subnet-private subnet.

az vm create \
    --resource-group test-rg \
    --name vm-private \
    --image Ubuntu2204 \
    --vnet-name vnet-1 \
    --subnet subnet-private \
    --public-ip-address "" \
    --admin-username azureuser \
    --authentication-type password

Enable IP forwarding

To route traffic through the NVA, turn on IP forwarding in Azure and in the operating system of vm-nva. When IP forwarding is enabled, any traffic received by vm-nva that's destined for a different IP address, isn't dropped and is forwarded to the correct destination.

Enable IP forwarding in Azure

In this section, you turn on IP forwarding for the network interface of the vm-nva virtual machine.

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
In Virtual machines, select vm-nva.
In vm-nva, expand Networking then select Network settings.
Select the name of the interface next to Network Interface:. The name begins with vm-nva and has a random number assigned to the interface. The name of the interface in this example is vm-nva313.
In the network interface overview page, select IP configurations from the Settings section.
In IP configurations, select the box next to Enable IP forwarding.
Select Apply.

Enable IP forwarding for the network interface of the vm-nva virtual machine with Set-AzNetworkInterface. The following example enables IP forwarding for the network interface named vm-nva313.

$nicParams = @{
  Name = "vm-nva"
  ResourceGroupName = "test-rg"
}
$nic = Get-AzNetworkInterface @nicParams

$nic.EnableIPForwarding = $true

Set-AzNetworkInterface -NetworkInterface $nic

Enable IP forwarding for the network interface of the vm-nva virtual machine with az network nic update. The following example enables IP forwarding for the network interface named vm-nvaVMNic.

az network nic update \
    --name vm-nvaVMNic \
    --resource-group test-rg \
    --ip-forwarding true

Enable IP forwarding in the operating system

In this section, turn on IP forwarding for the operating system of the vm-nva virtual machine to forward network traffic. Use the Azure Bastion service to connect to the vm-nva virtual machine.

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
In Virtual machines, select vm-nva.
Select Connect, then Connect via Bastion in the Overview section.
Enter the username and password you entered when the virtual machine was created.
Select Connect.
Enter the following information at the prompt of the virtual machine to enable IP forwarding:
```
sudo vim /etc/sysctl.conf
```
In the Vim editor, remove the # from the line net.ipv4.ip_forward=1:

Press the Insert key.
```
# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1
```
Press the Esc key.

Enter :wq and press Enter.
Close the Bastion session.
Restart the virtual machine.

Create a route table

In this section, create a route table to define the route of the traffic through the NVA virtual machine. The route table is associated to the subnet-1 subnet where the vm-public virtual machine is deployed.

In the search box at the top of the portal, enter Route table. Select Route tables in the search results.
Select + Create.

In Create Route table enter or select the following information:

Setting	Value
Project details
Subscription	Select your subscription.
Resource group	Select test-rg.
Instance details
Region	Select East US 2.
Name	Enter route-table-public.
Propagate gateway routes	Leave the default of Yes.

Select Review + create.
Select Create.

Create a route

In this section, create a route in the route table that you created in the previous steps.

In the search box at the top of the portal, enter Route table. Select Route tables in the search results.
Select route-table-public.
Expand Settings then select Routes.
Select + Add in Routes.

Enter or select the following information in Add route:

Setting	Value
Route name	Enter to-private-subnet.
Destination type	Select IP Addresses.
Destination IP addresses/CIDR ranges	Enter 10.0.2.0/24.
Next hop type	Select Virtual appliance.
Next hop address	Enter 10.0.3.4. *This is the IP address of the vm-nva you created in the earlier steps.*.

Screenshot of route creation in route table.

Select Add.
Select Subnets in Settings.
Select + Associate.
Enter or select the following information in Associate subnet:

Setting Value

Virtual network Select vnet-1 (test-rg).

Subnet Select subnet-1.
Select OK.

Setting	Value
Virtual network	Select vnet-1 (test-rg).
Subnet	Select subnet-1.

Create a route table with New-AzRouteTable. The following example creates a route table named route-table-public.

$routeTableParams = @{
    Name = 'route-table-public'
    ResourceGroupName = 'test-rg'
    Location = 'eastus2'
}
$routeTablePublic = New-AzRouteTable @routeTableParams

Create a route by retrieving the route table object with Get-AzRouteTable, create a route with Add-AzRouteConfig, then write the route configuration to the route table with Set-AzRouteTable.

$routeTableParams = @{
    ResourceGroupName = "test-rg"
    Name = "route-table-public"
}

$routeConfigParams = @{
    Name = "to-private-subnet"
    AddressPrefix = "10.0.2.0/24"
    NextHopType = "VirtualAppliance"
    NextHopIpAddress = "10.0.3.4"
}

$routeTable = Get-AzRouteTable @routeTableParams
$routeTable | Add-AzRouteConfig @routeConfigParams | Set-AzRouteTable

Associate the route table with the subnet-1 subnet with Set-AzVirtualNetworkSubnetConfig. The following example associates the route-table-public route table with the subnet-1 subnet.

$vnetParams = @{
    Name = 'vnet-1'
    ResourceGroupName = 'test-rg'
}
$virtualNetwork = Get-AzVirtualNetwork @vnetParams

$subnetParams = @{
    VirtualNetwork = $virtualNetwork
    Name = 'subnet-1'
    AddressPrefix = '10.0.0.0/24'
    RouteTable = $routeTablePublic
}
Set-AzVirtualNetworkSubnetConfig @subnetParams | Set-AzVirtualNetwork

Create a route table with az network route-table create. The following example creates a route table named route-table-public.

# Create a route table
az network route-table create \
    --resource-group test-rg \
    --name route-table-public

Create a route in the route table with az network route-table route create.

az network route-table route create \
    --name to-private-subnet \
    --resource-group test-rg \
    --route-table-name route-table-public \
    --address-prefix 10.0.2.0/24 \
    --next-hop-type VirtualAppliance \
    --next-hop-ip-address 10.0.3.4

Associate the route-table-subnet-public route table to the subnet-1 subnet with az network vnet subnet update.

az network vnet subnet update \
    --vnet-name vnet-1 \
    --name subnet-1 \
    --resource-group test-rg \
    --route-table route-table-public

Test the routing of network traffic

Test routing of network traffic from vm-public to vm-private. Test routing of network traffic from vm-private to vm-public.

Test network traffic from vm-public to vm-private

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
In Virtual machines, select vm-public.
Select Connect then Connect via Bastion in the Overview section.
Enter the username and password you entered when the virtual machine was created.
Select Connect.
In the prompt, enter the following command to trace the routing of network traffic from vm-public to vm-private:
```
tracepath vm-private
```
The response is similar to the following example:
```
azureuser@vm-public:~$ tracepath vm-private
 1?: [LOCALHOST]                      pmtu 1500
 1:  vm-nva.internal.cloudapp.net                          1.766ms 
 1:  vm-nva.internal.cloudapp.net                          1.259ms 
 2:  vm-private.internal.cloudapp.net                      2.202ms reached
 Resume: pmtu 1500 hops 2 back 1 
```
You can see that there are two hops in the above response for tracepath ICMP traffic from vm-public to vm-private. The first hop is vm-nva. The second hop is the destination vm-private.

Azure sent the traffic from subnet-1 through the NVA and not directly to subnet-private because you previously added the to-private-subnet route to route-table-public and associated it to subnet-1.
Close the Bastion session.

Test network traffic from vm-private to vm-public

In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
In Virtual machines, select vm-private.
Select Connect then Connect via Bastion in the Overview section.
Enter the username and password you entered when the virtual machine was created.
Select Connect.
In the prompt, enter the following command to trace the routing of network traffic from vm-private to vm-public:
```
tracepath vm-public
```
The response is similar to the following example:
```
azureuser@vm-private:~$ tracepath vm-public
 1?: [LOCALHOST]                      pmtu 1500
 1:  vm-public.internal.cloudapp.net                       2.584ms reached
 1:  vm-public.internal.cloudapp.net                       2.147ms reached
 Resume: pmtu 1500 hops 1 back 2 
```
You can see that there's one hop in the above response, which is the destination vm-public.

Azure sent the traffic directly from subnet-private to subnet-1. By default, Azure routes traffic directly between subnets.
Close the Bastion session.

When you finish using the resources that you created, you can delete the resource group and all its resources.

In the Azure portal, search for and select Resource groups.
On the Resource groups page, select the test-rg resource group.
On the test-rg page, select Delete resource group.
Enter test-rg in Enter resource group name to confirm deletion, and then select Delete.

When no longer needed, use Remove-AzResourcegroup to remove the resource group and all of the resources it contains.

$rgParams = @{
    Name = "test-rg"
}
Remove-AzResourceGroup @rgParams -Force

When no longer needed, use az group delete to remove the resource group and all of the resources it contains.

az group delete \
    --name test-rg \
    --yes \
    --no-wait

Next steps

In this tutorial, you:

Created a route table and associated it to a subnet.
Created a simple NVA that routed traffic from a public subnet to a private subnet.

You can deploy different preconfigured NVAs from the Azure Marketplace, which provide many useful network functions.

To learn more about routing, see Routing overview and Manage a route table.

To learn how to restrict network access to PaaS resources with virtual network service endpoints, advance to the next tutorial.

Restrict network access using service endpoints

แชร์ผ่าน

Tutorial: Route network traffic with a route table

Prerequisites

Azure Cloud Shell

Create subnets

Create a virtual network and an Azure Bastion host

Create Azure Bastion

Create Azure Bastion

Create an NVA virtual machine

Create public and private virtual machines

Create public virtual machine

Create private virtual machine

Enable IP forwarding

Enable IP forwarding in Azure

Enable IP forwarding in the operating system

Create a route table

Create a route

Test the routing of network traffic

Test network traffic from vm-public to vm-private

Test network traffic from vm-private to vm-public

Next steps

คำติชม

แหล่งทรัพยากรเพิ่มเติม