แก้ไข

แชร์ผ่าน

Create and modify a Network Fabric Controller using Azure CLI

  • บทความ

This article describes how to create a Network Fabric Controller (NFC) by using the Azure Command Line Interface (AzureCLI). This document also shows you how to check the status, or delete a Network Fabric Controller.

Prerequisites

You must implement all the prerequisites prior to creating an NFC.

Names, such as for resources, shouldn't contain the underscore (_) character.

Validate ExpressRoute circuit

Validate the ExpressRoute circuit(s) for correct connectivity (CircuitID)(AuthID); NFC provisioning would fail if connectivity is incorrect.

Create a Network Fabric Controller

You must create a resource group before you create your NFC.

Note: You should create a separate Resource Group for each NFC.

You create resource groups by running the following commands:

az group create -n NFCResourceGroupName -l "<Location>"

Attributes for NFC creation

Parameter Description values Example Required Type
Resource-Group A resource group is a container that holds related resources for an Azure solution. NFCResourceGroupName XYZNFCResourceGroupName True String
Location The Azure Region is mandatory to provision your deployment. eastus, westus3, southcentralus, eastus2euap eastus True String
Resource-Name The Resource-name will be the name of the Network Fabric Controller nfcname XYZnfcname True String
ipv4-address-space IPv4 Network Fabric Controller Address Space, the default subnet block is 10.0.0.0/19, and it also shouldn't overlap with any of the ExpressRoute IPs 10.0.0.0/19 10.0.0.0/19 Not Required String
ipv6-address-space IPv6 Network Fabric Controller Address Space, this parameter defaults to FC00::/59, with the permissible range being /59 "FC00::/59" "FC00::/59" Not Required String
Express Route Circuits The ExpressRoute circuit is a dedicated 10G link that connects Azure and on-premises. You need to know the ExpressRoute Circuit ID and Auth key for an NFC to successfully provision. There are two Express Route Circuits, one for the Infrastructure services and other one for Workload (Tenant) services --infra-er-connections '[{"expressRouteCircuitId": "xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx", "expressRouteAuthorizationKey": "xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx"}]'

--workload-er-connections '[{"expressRouteCircuitId": "xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx", "expressRouteAuthorizationKey": "xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx"}]'		 subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01", "expressRouteAuthorizationKey": "xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx"}] True string
Managed-Resource-Group Managed Resource Group configuration properties. NFCManagedResourceGroupName XYZNFCManagedResourceGroupName True String

Here's an example of how you can create an NFC using the Azure CLI. For more information, see attributes section.

az networkfabric controller create \
  --resource-group "NFCResourceGroupName" \
  --location "<Location>"  \
  --resource-name "nfcname" \
  --ipv4-address-space "10.0.0.0/19" \
  --ipv6-address-space "FC00::/59" \
  --infra-er-connections '[{"expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01", "expressRouteAuthorizationKey": "<auth-key>"}]'
  --workload-er-connections '[{"expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01"", "expressRouteAuthorizationKey": "<auth-key>"}]' \
--debug --no-wait

Note: The NFC creation takes between 30-45 mins. Use the show command to monitor NFC creation progress. You'll see different provisioning states such as, Accepted, updating and Succeeded/Failed. Delete and recreate the NFC if the creation fails (Failed). The expected output only shows running as soon as you execute via AzureCLI

Expected output:

 {
  "id": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/NFCResourceGroupName/providers/Microsoft.ManagedNetworkFabric/networkFabricControllers/nfcname",
  "infrastructureExpressRouteConnections": [
    {
      "expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-02"
    }
  ],
  "infrastructureServices": {
    "ipv4AddressSpaces": [
      "10.0.0.0/21"
    ],
    "ipv6AddressSpaces": []
  },
  "ipv4AddressSpace": "10.0.0.0/19",
  "ipv6AddressSpace": "FC00::/59",
  "isWorkloadManagementNetworkEnabled": "True",
  "location": "<Location>",
  "managedResourceGroupConfiguration": {},
  "name": "NFCName",
  "provisioningState": "Succeeded",
  "resourceGroup": "NFCResourceGroupName",
  "systemData": {
    "createdAt": "2023XX-XXT18:59:41.7805324Z",
    "createdBy": "email@address.com",
    "createdByType": "User",
    "lastModifiedAt": "2023-XX-XXT09:50:27.4598499Z",
    "lastModifiedBy": "d1bd24c7-b27f-477e-86dd-939e107873d7",
    "lastModifiedByType": "Application"
  },
  "type": "microsoft.managednetworkfabric/networkfabriccontrollers",
  "workloadExpressRouteConnections": [
    {
      "expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx//resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-03"
    }
  ],
  "workloadManagementNetwork": true,
  "workloadServices": {
    "ipv4AddressSpaces": [
      "10.0.28.0/22"
    ],
    "ipv6AddressSpaces": []
  }
}

Get Network Fabric Controller

  az networkfabric controller show --resource-group "NFCResourceGroupName" --resource-name "nfcname"

Expected output:

{
  "id": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/NFCResourceGroupName/providers/Microsoft.ManagedNetworkFabric/networkFabricControllers/nfcname",
  "infrastructureExpressRouteConnections": [
    {
      "expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-02"
    }
  ],
  "infrastructureServices": {
    "ipv4AddressSpaces": [
      "10.0.0.0/21"
    ],
    "ipv6AddressSpaces": []
  },
  "ipv4AddressSpace": "10.0.0.0/19",
  "ipv6AddressSpace": "FC00::/59",
  "isWorkloadManagementNetworkEnabled": "True",
  "location": "<Location>",
  "managedResourceGroupConfiguration": {},
  "name": "NFCName",
  "provisioningState": "Succeeded",
  "resourceGroup": "NFCResourceGroupName",
  "systemData": {
    "createdAt": "2023XX-XXT18:59:41.7805324Z",
    "createdBy": "email@address.com",
    "createdByType": "User",
    "lastModifiedAt": "2023-XX-XXT09:50:27.4598499Z",
    "lastModifiedBy": "d1bd24c7-b27f-477e-86dd-939e107873d7",
    "lastModifiedByType": "Application"
  },
  "type": "microsoft.managednetworkfabric/networkfabriccontrollers",
  "workloadExpressRouteConnections": [
    {
      "expressRouteCircuitId": "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx//resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-03"
    }
  ],
  "workloadManagementNetwork": true,
  "workloadServices": {
    "ipv4AddressSpaces": [
      "10.0.28.0/22"
    ],
    "ipv6AddressSpaces": []
  }
}

Update Network Fabric Controller

The PATCH feature in the Network Fabric Controller provides users the ability to effortlessly add or replace additional Express Routes circuits. This functionality is particularly useful during periods of failure or potential migration events. In such cases, the Network Operator has the flexibility to modify an active Network Fabric Controller by adding or removing Express Routes and Keys, all while ensuring the operation remains unaffected.

Note

When initiating an update command, it's crucial to supply all the parameters provided during the creation process. This is because the update command will overwrite the existing content, necessitating the inclusion of all relevant parameters to ensure comprehensive and accurate modifications.

az networkfabric controller update \ 
  --resource-group "NFCResourceGroupName" \ 
  --location "<Location>"  \ 
  --resource-name "nfcname" \ 
  --ipv4-address-space "10.0.0.0/19" \ 
  --infra-er-connections '[{"expressRouteCircuitId":"/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01", "expressRouteAuthorizationKey": "<auth-key>"}]' 
  --workload-er-connections '[{"expressRouteCircuitId":"/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01"", "expressRouteAuthorizationKey": "<auth-key>"}]'

Note

Run az networkfabric controller show to retrieve information about a network fabric controller.

Update Network Fabrc Controller with multiple ExpressRoute circuits.

az networkfabric controller update \ 
 --resource-group "NFCResourceGroupName" \ 
 --location "eastus"  \ 
 --resource-name "nfcname" \ 
 --ipv4-address-space "10.0.0.0/19" \ 
--infra-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-01',expressRouteAuthorizationKey:'<auth-key>'},{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-02',expressRouteAuthorizationKey:'<auth-key>'}]"
--workload-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-03',expressRouteAuthorizationKey:'<auth-key>'},{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-04',expressRouteAuthorizationKey:'<auth-key>'}]"
Command Description
az networkfabric controller update Command to update an existing network fabric controller in Azure
Parameter Description Example Value
--resource-group Specifies the resource group where the network fabric controller is located. "NFCResourceGroupName"
--location Specifies the Azure region where the network fabric controller is deployed. "eastus"
--resource-name The name of the network fabric controller resource that you want to update. "nfcname"
--ipv4-address-space Defines the IPv4 address space for the network fabric controller. "10.0.0.0/19"
--infra-er-connections Specifies the infrastructure ExpressRoute connections in a JSON array format. "[{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-11',expressRouteAuthorizationKey:'<auth-key>'},{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-13',expressRouteAuthorizationKey:'<auth-key>'}]"
--workload-er-connections Specifies the workload ExpressRoute connections in a JSON array format. "[{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-11',expressRouteAuthorizationKey:'<auth-key>'},{expressRouteCircuitId:'/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/ER-Dedicated-WUS2-AFO-Circuits/providers/Microsoft.Network/expressRouteCircuits/MSFT-ER-Dedicated-PvtPeering-WestUS2-AFO-Ckt-12',expressRouteAuthorizationKey:'<auth-key>'}]"

Note

Replace the placeholders like "NFCResourceGroupName", "nfcname", and "<auth-key>" with actual values relevant to your setup.

Delete Network Fabric Controller

You should delete an NFC only after deleting all associated network fabrics.

  az networkfabric controller delete --resource-group "NFCResourceGroupName" --resource-name "nfcname"

Expected output:

"name": "nfcname",
    "networkFabricIds": [],
    "operationalState": null,
    "provisioningState": "succeeded",
    "resourceGroup": "NFCResourceGroupName",
    "systemData": {
      "createdAt": "2022-10-31T10:47:08.072025+00:00",

Note

It takes 30 mins to delete the NFC. In the Azure portal, verify that the hosted resources have been deleted.

Next steps

After you successfully create an NFC, the next step is to create a cluster manager.