Policy CSP - ADMX_PerformanceDiagnostics
Tip
This CSP contains ADMX-backed policies which require a special SyncML format to enable or disable. You must specify the data type in the SyncML as <Format>chr</Format>. For details, see Understanding ADMX-backed policies.
The payload of the SyncML must be XML-encoded; for this XML encoding, there are a variety of online encoders that you can use. To avoid encoding the payload, you can use CDATA if your MDM supports it. For more information, see CDATA Sections.
WdiScenarioExecutionPolicy_1
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later ✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later ✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later ✅ Windows 11, version 21H2 [10.0.22000] and later |
./Device/Vendor/MSFT/Policy/Config/ADMX_PerformanceDiagnostics/WdiScenarioExecutionPolicy_1
Determines the execution level for Windows Boot Performance Diagnostics.
If you enable this policy setting, you must select an execution level from the dropdown menu. If you select problem detection and troubleshooting only, the Diagnostic Policy Service (DPS) will detect Windows Boot Performance problems and attempt to determine their root causes. These root causes will be logged to the event log when detected, but no corrective action will be taken. If you select detection, troubleshooting and resolution, the DPS will detect Windows Boot Performance problems and indicate to the user that assisted resolution is available.
If you disable this policy setting, Windows won't be able to detect, troubleshoot or resolve any Windows Boot Performance problems that are handled by the DPS.
If you don't configure this policy setting, the DPS will enable Windows Boot Performance for resolution by default.
This policy setting takes effect only if the diagnostics-wide scenario execution policy isn't configured.
No system restart or service restart is required for this policy to take effect: changes take effect immediately.
This policy setting will only take effect when the Diagnostic Policy Service is in the running state. When the service is stopped or disabled, diagnostic scenarios won't be executed. The DPS can be configured with the Services snap-in to the Microsoft Management Console.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | WdiScenarioExecutionPolicy_1 |
| Friendly Name | Configure Scenario Execution Level |
| Location | Computer Configuration |
| Path | System > Troubleshooting and Diagnostics > Windows Boot Performance Diagnostics |
| Registry Key Name | SOFTWARE\Policies\Microsoft\Windows\WDI{67144949-5132-4859-8036-a737b43825d8} |
| Registry Value Name | ScenarioExecutionEnabled |
| ADMX File Name | PerformanceDiagnostics.admx |
WdiScenarioExecutionPolicy_2
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later ✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later ✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later ✅ Windows 11, version 21H2 [10.0.22000] and later |
./Device/Vendor/MSFT/Policy/Config/ADMX_PerformanceDiagnostics/WdiScenarioExecutionPolicy_2
Determines the execution level for Windows System Responsiveness Diagnostics.
If you enable this policy setting, you must select an execution level from the dropdown menu. If you select problem detection and troubleshooting only, the Diagnostic Policy Service (DPS) will detect Windows System Responsiveness problems and attempt to determine their root causes. These root causes will be logged to the event log when detected, but no corrective action will be taken. If you select detection, troubleshooting and resolution, the DPS will detect Windows System Responsiveness problems and indicate to the user that assisted resolution is available.
If you disable this policy setting, Windows won't be able to detect, troubleshoot or resolve any Windows System Responsiveness problems that are handled by the DPS.
If you don't configure this policy setting, the DPS will enable Windows System Responsiveness for resolution by default.
This policy setting takes effect only if the diagnostics-wide scenario execution policy isn't configured.
No system restart or service restart is required for this policy to take effect: changes take effect immediately.
This policy setting will only take effect when the Diagnostic Policy Service is in the running state. When the service is stopped or disabled, diagnostic scenarios won't be executed. The DPS can be configured with the Services snap-in to the Microsoft Management Console.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | WdiScenarioExecutionPolicy_2 |
| Friendly Name | Configure Scenario Execution Level |
| Location | Computer Configuration |
| Path | System > Troubleshooting and Diagnostics > Windows System Responsiveness Performance Diagnostics |
| Registry Key Name | SOFTWARE\Policies\Microsoft\Windows\WDI{a7a5847a-7511-4e4e-90b1-45ad2a002f51} |
| Registry Value Name | ScenarioExecutionEnabled |
| ADMX File Name | PerformanceDiagnostics.admx |
WdiScenarioExecutionPolicy_3
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later ✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later ✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later ✅ Windows 11, version 21H2 [10.0.22000] and later |
./Device/Vendor/MSFT/Policy/Config/ADMX_PerformanceDiagnostics/WdiScenarioExecutionPolicy_3
Determines the execution level for Windows Shutdown Performance Diagnostics.
If you enable this policy setting, you must select an execution level from the dropdown menu. If you select problem detection and troubleshooting only, the Diagnostic Policy Service (DPS) will detect Windows Shutdown Performance problems and attempt to determine their root causes. These root causes will be logged to the event log when detected, but no corrective action will be taken. If you select detection, troubleshooting and resolution, the DPS will detect Windows Shutdown Performance problems and indicate to the user that assisted resolution is available.
If you disable this policy setting, Windows won't be able to detect, troubleshoot or resolve any Windows Shutdown Performance problems that are handled by the DPS.
If you don't configure this policy setting, the DPS will enable Windows Shutdown Performance for resolution by default.
This policy setting takes effect only if the diagnostics-wide scenario execution policy isn't configured.
No system restart or service restart is required for this policy to take effect: changes take effect immediately.
This policy setting will only take effect when the Diagnostic Policy Service is in the running state. When the service is stopped or disabled, diagnostic scenarios won't be executed. The DPS can be configured with the Services snap-in to the Microsoft Management Console.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | WdiScenarioExecutionPolicy_3 |
| Friendly Name | Configure Scenario Execution Level |
| Location | Computer Configuration |
| Path | System > Troubleshooting and Diagnostics > Windows Shutdown Performance Diagnostics |
| Registry Key Name | SOFTWARE\Policies\Microsoft\Windows\WDI{2698178D-FDAD-40AE-9D3C-1371703ADC5B} |
| Registry Value Name | ScenarioExecutionEnabled |
| ADMX File Name | PerformanceDiagnostics.admx |
WdiScenarioExecutionPolicy_4
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later ✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later ✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later ✅ Windows 11, version 21H2 [10.0.22000] and later |
./Device/Vendor/MSFT/Policy/Config/ADMX_PerformanceDiagnostics/WdiScenarioExecutionPolicy_4
Determines the execution level for Windows Standby/Resume Performance Diagnostics.
If you enable this policy setting, you must select an execution level from the dropdown menu. If you select problem detection and troubleshooting only, the Diagnostic Policy Service (DPS) will detect Windows Standby/Resume Performance problems and attempt to determine their root causes. These root causes will be logged to the event log when detected, but no corrective action will be taken. If you select detection, troubleshooting and resolution, the DPS will detect Windows Standby/Resume Performance problems and indicate to the user that assisted resolution is available.
If you disable this policy setting, Windows won't be able to detect, troubleshoot or resolve any Windows Standby/Resume Performance problems that are handled by the DPS.
If you don't configure this policy setting, the DPS will enable Windows Standby/Resume Performance for resolution by default.
This policy setting takes effect only if the diagnostics-wide scenario execution policy isn't configured.
No system restart or service restart is required for this policy to take effect: changes take effect immediately.
This policy setting will only take effect when the Diagnostic Policy Service is in the running state. When the service is stopped or disabled, diagnostic scenarios won't be executed. The DPS can be configured with the Services snap-in to the Microsoft Management Console.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | WdiScenarioExecutionPolicy_4 |
| Friendly Name | Configure Scenario Execution Level |
| Location | Computer Configuration |
| Path | System > Troubleshooting and Diagnostics > Windows Standby/Resume Performance Diagnostics |
| Registry Key Name | SOFTWARE\Policies\Microsoft\Windows\WDI{ffc42108-4920-4acf-a4fc-8abdcc68ada4} |
| Registry Value Name | ScenarioExecutionEnabled |
| ADMX File Name | PerformanceDiagnostics.admx |