Dela via

iSCSI HBA Mutual CHAP Test (LOGO)

  • Artikel

This test verifies that the iSCSI initiator can use the Challenge Handshake Authentication Protocol (CHAP) authentication mechanism. The test verifies mutual CHAP.

Test details

   
Specifications
  • Device.Storage.Controller.Iscsi.Interface
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 5
Category Development
Timeout (in minutes) 300
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: iSCSI HBA Testing Prerequisites.

In addition, this test requires the following software and hardware:

  • 1 GB network adapter

If this is the first time you are running an iSCSI HBA test, iSCSI Target test, or MPIO test over iSCSI bus type on the HLK client, or if there is no iscsihctconfig.ini under [HLK Path]\JobsWorkingDir\ on the HLK client, you will receive a pop-up dialog box to input iSCSI configuration information and/or HBA information. For more information about this dialog box, see "Running the test" in iSCSI HBA Boot Test (LOGO).

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Storage Testing.

In addition:

  1. Look at the job results log file for test failures

  2. Enter the required data in the configuration dialog box that appears when this job is scheduled. For more information, go to iSCSI HBA Boot Test (LOGO).

This test returns Pass or Fail. To review test details, review the test log from the Windows HLK Manager.

More information

The test implements a simple test target and does not require a separate iSCSI target device. The test initiates a login to the test target specifying mutual CHAP. The target verifies that the initiator follows the CHAP protocol specifics detailed in the iSCSI specification. Different test variations will use different encodings (Base16 or Base64) for CHAP responses. In addition, the test returns both valid and invalid responses to the initiator's challenge in order to verify that the HBA properly authenticates the target and returns the appropriate status to the user.

To run this test:

  1. Run the test as an HLK Studio job.

  2. Fill the required data in the configuration UI that pops up when this job is scheduled.

Command syntax

Command Description

iscsi_initchap.exe -mutual -hct -v [LogVerbosity]

Runs the test. The -v option controls the verbosity of the logging. There are three levels of output: 0, 1, and 2. 2 is the most verbose.

Note

   For command-line help for this test binary, type /h.

 

File list

File Location

iscsi_initchap.exe

<[testbinroot]>\nttest\driverstest\storage\wdk\iscsi\

 

Parameters

Parameter name Parameter description
LLU_NetAccessOnly User account for accessing test fileshare.
LLU_LclAdminUsr User account for running the test.
LogVerbosity Vebosity of logging. There are three levels of output 0,1,2 where 2 is the most verbose.