Redigera

Dela via


!amli u

The !amli u extension unassembles AML code.

Syntax

    !amli u [ MethodName | CodeAddress ]

Parameters

MethodName
Specifies the full path of the method name to be disassembled.

CodeAddress
Specifies the address of the AML code where disassembly will begin. If CodeAddress is prefixed with two percent signs (%%), it is interpreted as a physical address. Otherwise, it is interpreted as a virtual address.

DLL

Kdexts.dll

Additional Information

For information about related commands and their uses, see The AMLI Debugger.

Remarks

If neither MethodName nor CodeAddress is specified and you are issuing this command from an AMLI

The disassembly display will continue until the end of the method is reached.

Note   The standard u (Unassemble) command will not give proper results with AML code.

Here are some examples. To disassemble the object at address 0x80E5D701, use the following command:

kd> !amli u 80e5d701

ffffffff80e5d701 : CreateWordField(CRES, 0x1, IRQW)
ffffffff80e5d70c : And(\_SB_.PCI0.LPC_.PIRA, 0xf, Local0)
ffffffff80e5d723 : Store(One, Local1)
ffffffff80e5d726 : ShiftLeft(Local1, Local0, IRQW)
ffffffff80e5d72d : Return(CRES)

The following command will disassemble the _DCK method:

kd> u \_sb.pci0.dock._dck