Redigera

Dela via

Set up SQL Server TDE Extensible Key Management by using Azure Key Vault

  • Artikel

Applies to: SQL Server

In this article, you install and configure the SQL Server Connector for Azure Key Vault.

Note

Microsoft Entra ID was previously known as Azure Active Directory (Azure AD).

Extensible Key Management using Azure Key Vault (AKV) is available for SQL Server on Linux environments, starting with SQL Server 2022 (16.x) Cumulative Update 12. Follow the same instructions, but skip steps 3 and 4.

Prerequisites

Before you begin using Azure Key Vault with your SQL Server instance, be sure that you've met the following prerequisites:

Note

In SQL Server 2022 (16.x) CU 14 and later versions, SQL Server on Linux supports TDE Extensible Key Management with Azure Key Vault. Steps 3 and 4 in this guide aren't required for SQL Server on Linux.

Step 1: Set up a Microsoft Entra service principal

To grant your SQL Server instance access permissions to your Azure key vault, you need a service principal account in Microsoft Entra ID.

  1. Sign in to the Azure portal, and do either of the following:

    • Select the Microsoft Entra ID button.

      Screenshot of the Azure services pane.

    • Select More services and then, in the All services pane, type Microsoft Entra ID.

  2. Register an application with Microsoft Entra ID by doing the following. For detailed step-by-step instructions, see the Get an identity for the application section of the Azure Key Vault blog post, Azure Key Vault – Step by Step.

    1. On the Manage section of your Microsoft Entra ID resource, select App registrations.

      Screenshot of the Microsoft Entra ID Overview page in the Azure portal.

    2. On the App registrations page, select New registration.

      Screenshot of the App registrations pane in the Azure portal.

    3. On the Register an application pane, enter the user-facing name for the app, and then select Register.

      Screenshot of the Register an application pane.

    4. In the left pane, select Certificates & secrets > Client secrets > New client secret.

      Screenshot of the Certificates & secrets pane for the App in the Azure portal.

    5. Under Add a client secret, enter a description and an appropriate expiration, and then select Add. You can't choose an expiration period greater than 24 months. For more information, see Add a client secret.

      Screenshot of the Add a client secret section for the App in the Azure portal.

    6. On the Certificates & secrets pane, under Value, select the Copy button next to the value of the client secret to be used to create an asymmetric key in SQL Server.

      Screenshot of the secret value in the Azure portal.

    7. In the left pane, select Overview and then, in the Application (client) ID box, copy the value to be used to create an asymmetric key in SQL Server.

      Screenshot of the Application (client) ID value on the Overview pane.

Step 2: Create a key vault

Select the method you want to use to create a key vault.

Create a key vault by using the Azure portal

You can use the Azure portal to create the key vault and then add a Microsoft Entra principal to it.

  1. Create a resource group.

    All Azure resources that you create via the Azure portal must be contained in a resource group, which you create to house your key vault. The resource name in this example is DocsSampleRG. Choose your own resource group and key vault name, because all key vault names must be globally unique.

    On the Create a resource group pane, under Project details, enter the values, and then select Review + create.

    Screenshot of the Create a resource group pane in the Azure portal.

  2. In the Azure portal, search or select the Key vaults services to create a key vault. Select Create.

    On the Create a key vault pane, select the Basics tab. Enter the appropriate values for the tab. We also recommend enabling purge protection.

    Screenshot of the Create key vault pane in the Azure portal.

  3. On the Access configuration tab, you have the option of selecting Azure role-based access control or Vault access policy. We go over both options, but the Azure role-based access control option is recommended. For more information, see Access model overview.

    Screenshot of the Create key vault pane and Access configuration tab in the Azure portal.

  4. You can leave the Networking tab as the default, or you can configure the network settings for the key vault. If you're using a firewall with the key vault, the option Allow trusted Microsoft services to bypass the firewall must be enabled, unless you're using private endpoint connections. For more information, see Configure Azure Key Vault firewalls and virtual networks.

  5. Select Review + create and create the key vault.

Azure role-based access control

The recommended method is to use Azure role-based access control (RBAC) to assign permissions to the key vault. This method allows you to assign permissions to users, groups, and applications at a more granular level. You can assign permissions to the key vault at the management plane (Azure role assignments), and at the data plane (key vault access policies). If you're only able to use access policy, you can skip this section and go to the Vault access policy section. For more information on Azure Key Vault RBAC permissions, see Azure built-in roles for Key Vault data plane operations.

  1. Go to the key vault resource that you created, and select the Access control (IAM) setting.

  2. Select Add > Add role assignment.

    Screenshot of the Add role assignment button on the Access control (IAM) pane in the Azure portal.

  3. The EKM application needs the Key Vault Crypto Service Encryption User role to perform wrap and unwrap operations. Search for Key Vault Crypto Service Encryption User and select the role. Select Next.

    Screenshot of selecting a role assignment in the Azure portal.

  4. In the Members tab, select the Select members option, and then search for the Microsoft Entra application that you created in Step 1. Select the application and then the Select button.

    Screenshot of the Select members pane for adding a role assignment in the Azure portal.

  5. Select Review + assign twice to complete the role assignment.

  6. The user creating the key needs the Key Vault Administrator role. Search for Key Vault Administrator and select the role. Select Next.

  7. Just like the previous steps, add the member creating the key and assign the role.

Vault access policy

Note

If you are using the Azure role-based access control option, you can skip this section. If you are changing the permission model, you can do so by going to the Access configuration menu of the key vault. Make sure you have the correct permissions to manage the key vault. For more information, see Enable Azure RBAC permissions on Key Vault.

  1. From the Access configuration tab, select Vault access policy. If you're using an existing Key vault, you can select the Access policies menu from the Key vault resource, and select Create.

  2. On the Create an access policy pane, select Get and List permissions from the Key Management Operations options. Select Unwrap Key and Wrap Key permissions from the Cryptographic Operations options. Select Next

    Screenshot of the Add Access Policy link on the Access policies pane.

  3. On the Principal tab, select the application that was created in Step 1.

    Screenshot of application search box on the Principal pane.

  4. Select Next and then Create.

Create a key

  1. On the Key Vault pane, select Keys and then select the option Generate/Import. This opens the Create a key pane. Enter a key vault name. Select the Generate option, and enter a name for the key. The SQL Server Connector requires the key name to only use the characters "a-z", "A-Z", "0-9", and "-", with a 26-character limit.

  2. Use key type RSA and RSA key size as 2048. EKM currently only supports an RSA key. Set activation and expiration dates as appropriate and set Enabled as Yes.

    Screenshot of the Create Key pane.

Best practices

To ensure quick key recovery and be able to access your data outside of Azure, we recommend the following best practices:

  • Create your encryption key locally on a local hardware security module (HSM) device. Be sure to use an asymmetric RSA 2048 or 3072 key so that it's supported by SQL Server.

  • Import the encryption key to your Azure key vault. This process is described in the next sections.

  • Before you use the key in your Azure key vault for the first time, do an Azure key vault key backup using the Backup-AzureKeyVaultKey PowerShell cmdlet.

  • Whenever you make any changes to the key (for example, adding ACLs, tags, or key attributes), be sure to do another Azure key vault key backup.

    Note

    Backing up a key is an Azure Key Vault key operation which returns a file that can be saved anywhere.

    Using the SQL Server Connector for Azure Key Vault behind a firewall or proxy server can affect performance if traffic is delayed or blocked. Familiarize yourself with Access Azure Key Vault behind a firewall to ensure the correct rules are in place.

Optional - Configure an Azure Key Vault Managed HSM (Hardware Security Module)

Azure Key Vault Managed HSM (Hardware Security Module) is supported for SQL Server and SQL Server on Azure Virtual Machines (VMs) when using the latest version of the SQL Server Connector, as well as Azure SQL. Managed HSM is a fully managed, highly available, single-tenant HSM service. Managed HSM provides a secure foundation for cryptographic operations and key storage. Managed HSM is designed to meet the most stringent security and compliance requirements.

In step 2, we learned how to create a key vault and key in Azure Key Vault. You can optionally use an Azure Key Vault Managed HSM to store or create a key to be used with the SQL Server Connector. Here are the steps:

  1. Create an Azure Key Vault Managed HSM. This can be done using the Azure portal by searching for the Azure Key Vault Managed HSM service and creating the new resource, or by using the Azure CLI, PowerShell, or an ARM template.

  2. Activate the Managed HSM. Only the designated administrators that were assigned during the Managed HSM creation can activate the HSM. This can be done by selecting the Managed HSM resource in the Azure portal by selecting Download Security Domain in the Overview menu of the resource. Then follow one of the quickstarts to activate your Managed HSM.

  3. Grant permissions for the Microsoft Entra service principal to access the Managed HSM. The Managed HSM Administrator role doesn't give permissions to create a key. Similar to step 2, the EKM application needs the Managed HSM Crypto User or Managed HSM Crypto Service Encryption User role to perform wrap and unwrap operations. Choose the Enterprise application type when adding the principal for the role assignment. For more information, see Local RBAC built-in roles for Managed HSM.

  4. In the Azure Key Vault Managed HSM service menu, under Setting, select Keys. In the Keys window, select Generate/Import/Restore Backup to create a key or import an existing key.

    Note

    When creating a credential to access the Managed HSM, the identity is <name of Managed HSM>.managedhsm.azure.net, which can be found in the Azure Key Vault Managed HSM Overview as the HSM URI in the Azure portal.

    Automatic key rotation is supported in Azure Key Vault Managed HSM. For more information, see Configure key auto-rotation in Azure Managed HSM.

    SQL Server Connector version 15.0.2000.440 or later is required to support Azure Key Vault Managed HSM.

    Managed HSM supports private endpoint connections. For more information, see Integrate Managed HSM with Azure Private Link. In this configuration, the Microsoft trusted service bypass option must be enabled for the Azure Key Vault Managed HSM Networking setting.

Step 3: Install the SQL Server Connector

Download the SQL Server Connector from the Microsoft Download Center. The download should be done by the administrator of the SQL Server computer.

Note

  • SQL Server Connector versions 1.0.0.440 and older have been replaced and are no longer supported in production environments and using the instructions on the SQL Server Connector Maintenance & Troubleshooting page under Upgrade of SQL Server Connector.
  • Starting with version 1.0.3.0, the SQL Server Connector reports relevant error messages to the Windows event logs for troubleshooting.
  • Starting with version 1.0.4.0, there is support for private Azure clouds, including Azure operated by 21Vianet, Azure Germany, and Azure Government.
  • There is a breaking change in version 1.0.5.0 in terms of the thumbprint algorithm. You might experience database restore failures after upgrading to 1.0.5.0. For more information, see KB article 447099.
  • Starting with version 1.0.5.0 (TimeStamp: September 2020), the SQL Server Connector supports filtering messages and network request retry logic.
  • Starting with updated version 1.0.5.0 (TimeStamp: November 2020), the SQL Server Connector supports RSA 2048, RSA 3072, RSA-HSM 2048 and RSA-HSM 3072 keys.
  • Starting with updated version 1.0.5.0 (TimeStamp: November 2020), you can refer to a specific key version in the Azure Key Vault.

Screenshot of the SQL Server Connector installation wizard.

By default, the Connector is installed at C:\Program Files\SQL Server Connector for Microsoft Azure Key Vault. This location can be changed during setup. If you do change it, adjust the scripts in the next section.

There's no interface for the Connector, but if it's installed successfully, the Microsoft.AzureKeyVaultService.EKM.dll is installed on the machine. This assembly is the cryptographic EKM provider DLL that needs to be registered with SQL Server by using the CREATE CRYPTOGRAPHIC PROVIDER statement.

The SQL Server Connector installation also allows you to optionally download sample scripts for SQL Server encryption.

To view error code explanations, configuration settings, or maintenance tasks for the SQL Server Connector, see:

Step 4: Add registry key to support EKM provider

Warning

Modifying the registry should be performed by users that know exactly what they are doing. Serious problems might occur if you modify the registry incorrectly. For added protection, back up the registry before you modify it. You can restore the registry if a problem occurs.

Modifying the registry should be done by the administrator of the SQL Server computer.

  1. Make sure that SQL Server is installed and running.

  2. Run regedit to open the Registry Editor.

  3. Create a SQL Server Cryptographic Provider registry key on HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft. The full path is HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQL Server Cryptographic Provider.

  4. Right-click the SQL Server Cryptographic Provider registry key, and then select Permissions.

  5. Give Full Control permissions on the SQL Server Cryptographic Provider registry key to the user account running the SQL Server service.

    Screenshot of the EKM registry key in Registry Editor.

  6. Select Apply and then OK.

  7. Close Registry Editor and restart the SQL Server service.

    Note

    If you use TDE with EKM or Azure Key Vault on a failover cluster instance, you must complete an additional step to add HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQL Server Cryptographic Provider to the Cluster Registry Checkpoint routine, so the registry can sync across the nodes. Syncing facilitates database recovery after failover and key rotation.

    To add the registry key to the Cluster Registry Checkpoint routine, in PowerShell, run the following command:

    Add-ClusterCheckpoint -RegistryCheckpoint "SOFTWARE\Microsoft\SQL Server Cryptographic Provider" -Resourcename "SQL Server"

Step 5: Configure SQL Server

For a note about the minimum permission levels needed for each action in this section, see B. Frequently Asked Questions.

Configure the master database

  1. Run sqlcmd or open SQL Server Management Studio.

  2. Configure SQL Server to use EKM by running the following Transact-SQL script:

    -- Enable advanced options.
USE master;
GO

EXEC sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO

-- Enable EKM provider
EXEC sp_configure 'EKM provider enabled', 1;
GO
RECONFIGURE;

  3. Register the SQL Server Connector as an EKM provider with SQL Server.

    Create a cryptographic provider by using the SQL Server Connector, which is an EKM provider for the Azure Key Vault. In this example, the provider name is AzureKeyVault_EKM.

    CREATE CRYPTOGRAPHIC PROVIDER AzureKeyVault_EKM
FROM FILE = 'C:\Program Files\SQL Server Connector for Microsoft Azure Key Vault\Microsoft.AzureKeyVaultService.EKM.dll';
GO

    Note

    The file path length can't exceed 256 characters.

  4. Set up a SQL Server credential for a SQL Server login to use the key vault.

    A credential must be added to each login that will perform encryption by using a key from the key vault. This might include:

    • A SQL Server administrator login that uses the key vault to set up and manage SQL Server encryption scenarios.

    • Other SQL Server logins that might enable TDE or other SQL Server encryption features.

    There's one-to-one mapping between credentials and logins. That is, each login must have a unique credential.

    Modify this Transact-SQL script in the following ways:

    • Edit the IDENTITY argument (DocsSampleEKMKeyVault) to point to your Azure Key Vault.

      • If you're using global Azure, replace the IDENTITY argument with the name of your Azure Key Vault from Step 2: Create a key vault.
      • If you're using a private Azure cloud (for example, Azure Government, Microsoft Azure operated by 21Vianet, or Azure Germany), replace the IDENTITY argument with the Vault URI that's returned in step 3 of the Create a key vault and key by using PowerShell section. Don't include https:// in the key vault URI.

    • Replace the first part of the SECRET argument with the Microsoft Entra Client ID from Step 1: Set up a Microsoft Entra service principal. In this example, the Client ID is d956f6b9xxxxxxx.

      Important

      Be sure to remove the hyphens from the App (Client) ID.

    • Complete the second part of the SECRET argument with Client Secret from Step 1: Set up a Microsoft Entra service principal. In this example, the Client Secret is yrA8X~PldtMCvUZPxxxxxxxx. The final string for the SECRET argument will be a long sequence of letters and numbers, without hyphens (except for the Client Secret section, in case the Client Secret contains any hyphens).

      USE master;
CREATE CREDENTIAL sysadmin_ekm_cred
    WITH IDENTITY = 'DocsSampleEKMKeyVault',                            -- for public Azure
    -- WITH IDENTITY = 'DocsSampleEKMKeyVault.vault.usgovcloudapi.net', -- for Azure Government
    -- WITH IDENTITY = 'DocsSampleEKMKeyVault.vault.azure.cn',          -- for Microsoft Azure operated by 21Vianet
    -- WITH IDENTITY = 'DocsSampleEKMKeyVault.vault.microsoftazure.de', -- for Azure Germany
    -- WITH IDENTITY = '<name of Managed HSM>.managedhsm.azure.net',    -- for Managed HSM (HSM URI in the Azure portal resource)
           --<----Application (Client) ID ---><--Microsoft Entra app (Client) ID secret-->
    SECRET = 'd956f6b9xxxxxxxyrA8X~PldtMCvUZPxxxxxxxx'
FOR CRYPTOGRAPHIC PROVIDER AzureKeyVault_EKM;

-- Add the credential to the SQL Server administrator's domain login
ALTER LOGIN [<domain>\<login>]
ADD CREDENTIAL sysadmin_ekm_cred;

    For an example of using variables for the CREATE CREDENTIAL argument and programmatically removing the hyphens from the Client ID, see CREATE CREDENTIAL.

  5. Open your Azure Key Vault key in your SQL Server instance.

    Whether you created a new key or imported an asymmetric key, as described in Step 2: Create a key vault, you need to open the key. Open it by providing your key name in the following Transact-SQL script.

    Important

    Be sure to first complete the Registry prerequisites for this step.

    • Replace EKMSampleASYKey with the name you'd like the key to have in SQL Server.
    • Replace ContosoRSAKey0 with the name of your key in your Azure Key Vault or Managed HSM. Below is an example of a version-less key.
    CREATE ASYMMETRIC KEY EKMSampleASYKey
FROM PROVIDER [AzureKeyVault_EKM]
WITH PROVIDER_KEY_NAME = 'ContosoRSAKey0',
CREATION_DISPOSITION = OPEN_EXISTING;

    Beginning with updated version 1.0.5.0 of the SQL Server connector, you can refer to a specific key version in the Azure Key Vault:

    CREATE ASYMMETRIC KEY EKMSampleASYKey
FROM PROVIDER [AzureKeyVault_EKM]
WITH PROVIDER_KEY_NAME = 'ContosoRSAKey0/1a4d3b9b393c4678831ccc60def75379',
CREATION_DISPOSITION = OPEN_EXISTING;

    In the preceding example script, 1a4d3b9b393c4678831ccc60def75379 represents the specific version of the key that will be used. If you use this script, it doesn't matter if you update the key with a new version. The key version (for example) 1a4d3b9b393c4678831ccc60def75379 will always be used for database operations.

  6. Create a new login by using the asymmetric key in SQL Server that you created in the preceding step.

    --Create a Login that will associate the asymmetric key to this login
CREATE LOGIN TDE_Login
FROM ASYMMETRIC KEY EKMSampleASYKey;

  7. Create a new login from the asymmetric key in SQL Server. Drop the credential mapping from Step 5: Configure SQL Server so that the credentials can be mapped to the new login.

    --Now drop the credential mapping from the original association
ALTER LOGIN [<domain>\<login>]
DROP CREDENTIAL sysadmin_ekm_cred;

  8. Alter the new login, and map the EKM credentials to the new login.

    --Now add the credential mapping to the new Login
ALTER LOGIN TDE_Login
ADD CREDENTIAL sysadmin_ekm_cred;

Configure the user database to be encrypted

  1. Create a test database that will be encrypted with the Azure Key Vault key.

    --Create a test database that will be encrypted with the Azure Key Vault key
CREATE DATABASE TestTDE;

  2. Create a database encryption key by using the ASYMMETRIC KEY (EKMSampleASYKey).

    USE <DB Name>;
--Create an ENCRYPTION KEY using the ASYMMETRIC KEY (EKMSampleASYKey)
CREATE DATABASE ENCRYPTION KEY
WITH ALGORITHM = AES_256
ENCRYPTION BY SERVER ASYMMETRIC KEY EKMSampleASYKey;

  3. Encrypt the test database. Enable TDE by setting ENCRYPTION ON.

    --Enable TDE by setting ENCRYPTION ON
ALTER DATABASE TestTDE
SET ENCRYPTION ON;

Registry details

  1. Execute the following Transact-SQL query in the master database to show the asymmetric key used.

    SELECT name, algorithm_desc, thumbprint FROM sys.asymmetric_keys;

    The statement returns:

    name            algorithm_desc    thumbprint
EKMSampleASYKey RSA_2048          <key thumbprint>

  2. In the user database (TestTDE), execute the following Transact-SQL query to show the encryption key used.

    SELECT encryptor_type, encryption_state_desc, encryptor_thumbprint
FROM sys.dm_database_encryption_keys
WHERE database_id = DB_ID('TestTDE');

    The statement returns:

    encryptor_type encryption_state_desc encryptor_thumbprint
ASYMMETRIC KEY ENCRYPTED             <key thumbprint>

Clean up

  1. Clean up the test objects. Delete all the objects that were created in this test script.

    -- CLEAN UP
USE master;
GO
ALTER DATABASE [TestTDE] SET SINGLE_USER WITH ROLLBACK IMMEDIATE;
DROP DATABASE [TestTDE];
GO

ALTER LOGIN [TDE_Login] DROP CREDENTIAL [sysadmin_ekm_cred];
DROP LOGIN [TDE_Login];
GO

DROP CREDENTIAL [sysadmin_ekm_cred];
GO

USE master;
GO
DROP ASYMMETRIC KEY [EKMSampleASYKey];
DROP CRYPTOGRAPHIC PROVIDER [AzureKeyVault_EKM];
GO

    For sample scripts, see the blog at SQL Server Transparent Data Encryption and Extensible Key Management with Azure Key Vault.

  2. The SQL Server Cryptographic Provider registry key isn't cleaned up automatically after a key or all EKM keys are deleted. It must be cleaned up manually. Cleaning the registry key should be done with extreme caution, since cleaning the registry prematurely can break the EKM functionality. To clean up the registry key, delete the SQL Server Cryptographic Provider registry key on HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft.

Troubleshooting

If the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQL Server Cryptographic Provider isn't created or the required permissions aren't granted, the following DDL statement will fail:

CREATE ASYMMETRIC KEY EKMSampleASYKey
FROM PROVIDER [AzureKeyVault_EKM]
WITH PROVIDER_KEY_NAME = 'ContosoRSAKey0',
CREATION_DISPOSITION = OPEN_EXISTING;

Msg 33049, Level 16, State 2, Line 65
Key with name 'ContosoRSAKey0' does not exist in the provider or access is denied. Provider error code: 2058.  (Provider Error - No explanation is available, consult EKM Provider for details)

Client secrets that are about to expire

If the credential has a client secret that is about to expire, a new secret can be assigned to the credential.

  1. Update the secret originally created in Step 1: Set up a Microsoft Entra service principal.

  2. Alter the credential using the same identity and new secret using the following code. Replace <New Secret> with your new secret:

    ALTER CREDENTIAL sysadmin_ekm_cred
WITH IDENTITY = 'DocsSampleEKMKeyVault',
SECRET = '<New Secret>';

  3. Restart the SQL Server service.

Note

If you are using EKM in an availability group (AG), you will need to alter the credential and restart the SQL Server service on all nodes of the AG.

Rotate asymmetric key with a new AKV key or a new AKV key version

Note

  • When manually rotating an AKV key, SQL Server supports both AKV version-less key or versioned key and there's no need to use a different AKV key.
  • The original AKV key can be rotated creating a new version that can replace the previous key created in SQL Server.
  • For manual key rotation, a new SQL Server asymmetric key must be created referring to the version-less key or versioned key that was rotated in AKV. For the new SQL Server asymmetric key, the version-less AKV key will automatically be chosen using the highest key version in AKV. For the versioned key, you must indicate the highest version in AKV using the syntax WITH PROVIDER_KEY_NAME = <key_name>/<version>. You can alter the database encryption key to re-encrypt with the new asymmetric key. The same key name (versioned or version-less) can be used with AKV rotation policy. For versioned key, the current version must be added. For version-less key, use the same key name.

SQL Server doesn't have a mechanism to automatically rotate the asymmetric key used for TDE. The steps to rotate an asymmetric key manually are as follows.

  1. The credential used in our initial setup (sysadmin_ekm_cred) can also be reused for the key rotation. Optionally, create a new credential for the new asymmetric key.

    CREATE CREDENTIAL <new_credential_name>
    WITH IDENTITY = <key vault>,
    SECRET = 'existing/new secret'
    FOR CRYPTOGRAPHIC PROVIDER AzureKeyVault_EKM;

  2. Add the credential to the principal:

    ALTER LOGIN [domain\userName];
ADD CREDENTIAL <new_credential_name>;

  3. Create the new asymmetric key based on the new key (after rotating the key). The new key could be a version-less key (ContosoRSAKey0 in our example) or a versioned key (ContosoRSAKey0/1a4d3b9b393c4678831ccc60def75379 where 1a4d3b9b393c4678831ccc60def75379 is the version of the updated key in AKV):

    CREATE ASYMMETRIC KEY <new_ekm_key_name>
 FROM PROVIDER [AzureKeyVault_EKM]
 WITH PROVIDER_KEY_NAME = <new_key_from_key_vault>,
 CREATION_DISPOSITION = OPEN_EXISTING;

  4. Create a new login from the new asymmetric key:

    CREATE LOGIN <new_login_name>
FROM ASYMMETRIC KEY <new_ekm_key_name>;

  5. Drop the credential from the principal:

    ALTER LOGIN [domain\username]
DROP CREDENTIAL <new_credential_name>;

  6. Map AKV credential to the new login:

    ALTER LOGIN <new_login_name>;
ADD CREDENTIAL <new_credential_name>;

  7. Alter the database encryption key (DEK) to re-encrypt with the new asymmetric key:

    USE [databaseName];
GO
ALTER DATABASE ENCRYPTION KEY ENCRYPTION BY SERVER ASYMMETRIC KEY <new_ekm_key_name>;

  8. You can verify the new asymmetric key and the encryption key used in the database:

    SELECT encryptor_type, encryption_state_desc, encryptor_thumbprint
FROM sys.dm_database_encryption_keys
WHERE database_id = DB_ID('databaseName');

    This thumbprint should match the registry key under the path HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQL Server Cryptographic Provider\Azure Key Vault\<key_vault_url>\<thumbprint> and give you the KeyUri for your rotated key.

Important

Rotating the logical TDE protector for a server means switching to a new asymmetric key or certificate that protects the database encryption key (DEK). Key rotation is an online operation and should only take a few seconds to complete, because this only decrypts and re-encrypts the DEK and not the entire database.

Don't delete previous versions of the key after rotation. When keys are rotated, some data is still encrypted with the previous keys, such as older database backups, backed-up log files, virtual log files (VLF), and transaction log files. Previous keys might also be required for a database recovery or a database restore.

Related content