Send BLOB Data to SQL SERVER Using IROWSETFASTLOAD and ISEQUENTIALSTREAM in (Native Client OLE DB)
Applies to: 
SQL Server
Azure SQL Database
Azure SQL Managed Instance
Azure Synapse Analytics
Analytics Platform System (PDW)
This sample shows how to use IRowsetFastLoad to stream varying length BLOB data per row.
By default, this sample shows how to use IRowsetFastLoad to send variable length BLOB data per row by using in-line bindings. The in-line BLOB data must fit in available memory. This method performs best when the BLOB data is less than a few megabytes, because there is no additional stream overhead. For data larger than a few megabytes, especially data that is not available in a block, streaming provides better performance.
In the source code, when you uncomment #define USE_ISEQSTREAM , the sample will use ISequentialStream. The stream implementation is defined in the sample, and can send any size BLOB data simply by changing MAX_BLOB . Stream data does not have to fit in memory or be available in one block. You call this provider by using IRowsetFastLoad::InsertRow. Pass a pointer using IRowsetFastLoad::InsertRow to the stream implementation in the data buffer (rgBinding.obValue offset) along with the amount of data available to read from the stream. Some providers might not have to know the length of the data when binding occurs. In this case, the length can be omitted from the binding.
The sample does not use the provider's stream interface to write data to the provider. Instead, the sample passes a pointer to the stream object that the provider will consume to read the data. Typically, Microsoft providers (SQLOLEDB and SQLNCLI) will read data in 1024-byte chunks from the object until all data has been processed. Neither SQLOLEDB nor SQLNCLI have full implementations for allowing the consumer to write data to the provider's stream object. Only zero length data can be sent through the provider's stream object.
The consumer-implemented ISequentialStream object can be used with rowset data (IRowsetChange::InsertRow, IRowsetChange::SetData) and with parameters by binding a parameter as DBTYPE_IUNKNOWN.
Because DBTYPE_IUNKNOWN is specified as the data type in the binding, it must match the type of the column or target parameter. Conversions are not possible when sending data through ISequentialStream from rowset interfaces. For parameters, you should avoid using ICommandWithParameters::SetParameterInfo and specify a different type to force a conversion; this would require the provider to cache all the BLOB data locally, to convert it before sending to SQL Server. Caching a large BLOB and converting it locally does not provide good performance.
For more information, see BLOBs and OLE Objects.
Important
When possible, use Windows Authentication. If Windows Authentication is not available, prompt users to enter their credentials at run time. Avoid storing credentials in a file. If you must persist credentials, you should encrypt them with the Win32 crypto API.
Example
Execute the first ( Transact-SQL) code listing to create the table used by the application.
Compile with ole32.lib oleaut32.lib and execute the following C++ code listing. This application connects to your computer's default SQL Server instance. On some Windows operating systems, you will need to change (localhost) or (local) to the name of your SQL Server instance. To connect to a named instance, change the connection string from L"(local)" to L"(local)\\name" , where name is the named instance. By default, SQL Server Express installs to a named instance. Make sure your INCLUDE environment variable includes the directory that contains sqlncli.h.
Execute the third ( Transact-SQL) code listing to delete the table used by the application.
use master
create table fltest(col1 int, col2 int, col3 image)
// compile with: ole32.lib oleaut32.lib
#include <windows.h>
#define DBINITCONSTANTS // Must be defined to initialize constants in oledb.h
#define INITGUID
#include <sqloledb.h>
#include <oledb.h>
#include <msdasc.h>
#include <stdio.h>
#include <stdlib.h>
#include <conio.h>
#define MAX_BLOB 200 // For stream binding this can be any size, but for inline it must fit in memory
#define MAX_ROWS 100
#define SAFE_RELEASE(p) { \
if (p) { \
(p)->Release(); \
(p)=NULL; \
} \
}
#ifdef USE_ISEQSTREAM
// ISequentialStream implementation for streaming data
class MySequentialStream : public ISequentialStream {
private:
ULONG m_ulRefCount;
ULONG m_ulBufSize;
ULONG m_ulReadSize;
ULONG m_ulBytesLeft;
ULONG m_ulReadPos;
BYTE * m_pSrcData;
BYTE * m_pReadPtr;
BOOL m_fWasRead;
public:
MySequentialStream() {
m_ulRefCount = 1;
m_ulBufSize = 0;
m_ulReadSize = 0;
m_ulBytesLeft = 0;
m_ulReadPos = 0;
m_pSrcData = NULL;
m_pReadPtr = NULL;
m_fWasRead = FALSE;
}
~MySequentialStream() {}
virtual ULONG STDMETHODCALLTYPE AddRef() {
return ++m_ulRefCount;
}
virtual ULONG STDMETHODCALLTYPE Release() {
--m_ulRefCount;
if (m_ulRefCount == 0) {
delete this;
return 0;
}
return m_ulRefCount;
}
virtual HRESULT STDMETHODCALLTYPE QueryInterface(REFIID riid, void ** ppvObj) {
if (!ppvObj)
return E_INVALIDARG;
else
*ppvObj = NULL;
if (riid != IID_ISequentialStream && riid != IID_IUnknown)
return E_NOINTERFACE;
AddRef();
*ppvObj = this;
return S_OK;
}
HRESULT Init(const void * pSrcData, const ULONG ulBufSize, const ULONG ulReadSize) {
if (NULL == pSrcData)
return E_INVALIDARG;
// Data length must be non-zero
if (0 == ulBufSize)
return E_INVALIDARG;
m_ulBufSize = ulBufSize;
m_ulReadSize = ulReadSize;
m_pSrcData = (BYTE *)pSrcData;
m_pReadPtr = m_pSrcData;
m_ulBytesLeft = m_ulReadSize;
m_ulReadPos = 0;
m_fWasRead = FALSE;
return S_OK;
}
// Can't write data to SQL Server providers (SQLOLEDB/SQLNCLI). Instead, they read from our object.
virtual HRESULT STDMETHODCALLTYPE Write(const void *, ULONG, ULONG * ) {
return E_NOTIMPL;
}
// This implementation simply copies data from the source buffer in whatever size requested.
// But you can do anything here such as reading from a file, reading from a different rowset, stream, etc.
virtual HRESULT STDMETHODCALLTYPE Read(void * pv, ULONG cb, ULONG * pcbRead) {
ULONG ulBytesWritten = 0;
ULONG ulCBToWrite = cb;
ULONG ulCBToCopy;
BYTE * pvb = (BYTE *)pv;
m_fWasRead = TRUE;
if (NULL == m_pSrcData)
return E_FAIL;
if (NULL == pv)
return STG_E_INVALIDPOINTER;
while (ulBytesWritten < ulCBToWrite && m_ulBytesLeft) {
// Make sure we don't write more than our max read size or the size they asked for
ulCBToCopy = min(m_ulBytesLeft, cb);
// Make sure we don't read past the end of the internal buffer
ulCBToCopy = min(m_ulBufSize - m_ulReadPos, ulCBToCopy);
memcpy(pvb, m_pReadPtr + m_ulReadPos, ulCBToCopy);
pvb += ulCBToCopy;
ulBytesWritten += ulCBToCopy;
m_ulBytesLeft -= ulCBToCopy;
cb -= ulCBToCopy;
// Wrap reads around the src buffer
m_ulReadPos += ulCBToCopy;
if (m_ulReadPos >= m_ulBufSize)
m_ulReadPos = 0;
}
if (pcbRead)
*pcbRead = ulBytesWritten;
return S_OK;
}
};
#endif // USE_ISEQSTREAM
HRESULT SetFastLoadProperty(IDBInitialize * pIDBInitialize) {
HRESULT hr = S_OK;
IDBProperties * pIDBProps = NULL;
DBPROP rgProps[1];
DBPROPSET PropSet;
VariantInit(&rgProps[0].vValue);
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BOOL;
rgProps[0].dwPropertyID = SSPROP_ENABLEFASTLOAD;
rgProps[0].vValue.boolVal = VARIANT_TRUE;
PropSet.rgProperties = rgProps;
PropSet.cProperties = 1;
PropSet.guidPropertySet = DBPROPSET_SQLSERVERDATASOURCE;
if (SUCCEEDED(hr = pIDBInitialize->QueryInterface(IID_IDBProperties, (LPVOID *)&pIDBProps))) {
hr = pIDBProps->SetProperties(1, &PropSet);
}
VariantClear(&rgProps[0].vValue);
if (pIDBProps)
pIDBProps->Release();
return hr;
}
void wmain() {
// Setup the initialization options
ULONG cProperties = 0;
DBPROP rgProperties[10];
ULONG cPropSets = 0;
DBPROPSET rgPropSets[1];
LPWSTR pwszProgID = L"SQLOLEDB";
LPWSTR pwszDataSource = NULL;
LPWSTR pwszUserID = NULL;
LPWSTR pwszPassword = NULL;
LPWSTR pwszProviderString = L"server=(local);trusted_connection=yes;";
IDBInitialize * pIDBInitialize = NULL;
IDBCreateSession * pIDBCrtSess = NULL;
IOpenRowset * pIOpenRowset = NULL;
IDBCreateCommand * pIDBCrtCmd = NULL;
ICommandText * pICmdText = NULL;
IAccessor * pIAccessor = NULL;
IRowsetFastLoad * pIRowsetFastLoad = NULL;
IDBProperties * pIDBProperties = NULL;
DBBINDING rgBinding[3];
DBBINDSTATUS rgStatus[3];
ULONG ulOffset = 0;
HACCESSOR hAcc = DB_NULL_HACCESSOR;
BYTE * pData = NULL;
ULONG iRow = 0;
LPWSTR pwszTableName = L"fltest";
DBID TableID;
HRESULT hr;
#ifdef USE_ISEQSTREAM
BYTE bSrcBuf[1024]; // A buffer to hold our data for streaming
memset((void *)&bSrcBuf, 0xAB, sizeof(bSrcBuf)); // Stream data value 0xAB
MySequentialStream * pMySeqStream = new MySequentialStream();
DBOBJECT MyObject = {STGM_READ, IID_ISequentialStream}; // NULL pObject implies STGM_READ and IID_IUnknown, but not recommended
#endif
memset(rgBinding, 0, ( sizeof(rgBinding) / sizeof(rgBinding[0])) * sizeof(DBBINDING) );
TableID.eKind = DBKIND_NAME;
TableID.uName.pwszName = pwszTableName;
// Col1
rgBinding[0].iOrdinal = 1;
rgBinding[0].wType = DBTYPE_I4;
rgBinding[0].obStatus = ulOffset;
ulOffset+=sizeof(DBSTATUS);
rgBinding[0].obLength = ulOffset;
ulOffset+=sizeof(DBLENGTH);
rgBinding[0].obValue = ulOffset;
ulOffset += sizeof(LONG);
rgBinding[0].cbMaxLen = sizeof(LONG);
rgBinding[0].dwPart = DBPART_VALUE | DBPART_STATUS | DBPART_LENGTH;
rgBinding[0].eParamIO = DBPARAMIO_NOTPARAM;
rgBinding[0].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
//Col2
rgBinding[1].iOrdinal = 2;
rgBinding[1].wType = DBTYPE_I4;
rgBinding[1].obStatus = ulOffset;
ulOffset+=sizeof(DBSTATUS);
rgBinding[1].obLength = ulOffset;
ulOffset+=sizeof(DBLENGTH);
rgBinding[1].obValue = ulOffset;
ulOffset += sizeof(LONG);
rgBinding[1].cbMaxLen = sizeof(LONG);
rgBinding[1].dwPart = DBPART_VALUE | DBPART_STATUS | DBPART_LENGTH;
rgBinding[1].eParamIO = DBPARAMIO_NOTPARAM;
rgBinding[1].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
//Col3
rgBinding[2].iOrdinal = 3;
rgBinding[2].obStatus = ulOffset;
ulOffset+=sizeof(DBSTATUS);
rgBinding[2].obLength = ulOffset;
ulOffset+=sizeof(DBLENGTH);
rgBinding[2].obValue = ulOffset;
rgBinding[2].dwPart = DBPART_VALUE | DBPART_STATUS | DBPART_LENGTH; // DBPART_LENGTH not needed for providers that don't require length
rgBinding[2].eParamIO = DBPARAMIO_NOTPARAM;
rgBinding[2].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
#ifdef USE_ISEQSTREAM
rgBinding[2].wType = DBTYPE_IUNKNOWN;
ulOffset += sizeof(ISequentialStream *); // Technically should be sizeof(MySequentialStream *), but who's counting?
rgBinding[2].cbMaxLen = sizeof(ISequentialStream *);
rgBinding[2].pObject = &MyObject;
#else
rgBinding[2].wType = DBTYPE_BYTES;
ulOffset += MAX_BLOB;
rgBinding[2].cbMaxLen = MAX_BLOB;
#endif
// Set init props
for ( ULONG i = 0 ; i < sizeof(rgProperties) / sizeof(rgProperties[0]) ; i++ )
VariantInit(&rgProperties[i].vValue);
// Obtain the provider's clsid
CLSID clsidProv;
hr = CLSIDFromProgID(pwszProgID, &clsidProv);
// Get our initial connection
CoInitialize(NULL);
if (SUCCEEDED(hr))
hr = CoCreateInstance(clsidProv, NULL, CLSCTX_ALL, IID_IDBInitialize,(void **)&pIDBInitialize);
if (SUCCEEDED(hr))
hr = pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&pIDBProperties);
// DBPROP_INIT_DATASOURCE
if (pwszDataSource) {
rgProperties[cProperties].dwPropertyID = DBPROP_INIT_DATASOURCE;
rgProperties[cProperties].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[cProperties].dwStatus = DBPROPSTATUS_OK;
rgProperties[cProperties].colid = DB_NULLID;
rgProperties[cProperties].vValue.vt = VT_BSTR;
V_BSTR(&rgProperties[cProperties].vValue) = SysAllocString(pwszDataSource);
cProperties++;
}
// DBPROP_AUTH_USERID
if (pwszUserID) {
rgProperties[cProperties].dwPropertyID = DBPROP_AUTH_USERID;
rgProperties[cProperties].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[cProperties].dwStatus = DBPROPSTATUS_OK;
rgProperties[cProperties].colid = DB_NULLID;
rgProperties[cProperties].vValue.vt = VT_BSTR;
V_BSTR(&rgProperties[cProperties].vValue) = SysAllocString(pwszUserID);
cProperties++;
}
// DBPROP_AUTH_PASSWORD
if (pwszPassword) {
rgProperties[cProperties].dwPropertyID = DBPROP_AUTH_PASSWORD;
rgProperties[cProperties].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[cProperties].dwStatus = DBPROPSTATUS_OK;
rgProperties[cProperties].colid = DB_NULLID;
rgProperties[cProperties].vValue.vt = VT_BSTR;
V_BSTR(&rgProperties[cProperties].vValue) = SysAllocString(pwszPassword);
cProperties++;
}
// DBPROP_INIT_PROVIDERSTRING
if (pwszProviderString) {
rgProperties[cProperties].dwPropertyID = DBPROP_INIT_PROVIDERSTRING;
rgProperties[cProperties].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[cProperties].dwStatus = DBPROPSTATUS_OK;
rgProperties[cProperties].colid = DB_NULLID;
rgProperties[cProperties].vValue.vt = VT_BSTR;
V_BSTR(&rgProperties[cProperties].vValue) = SysAllocString(pwszProviderString);
cProperties++;
}
if (cProperties) {
rgPropSets[cPropSets].cProperties = cProperties;
rgPropSets[cPropSets].rgProperties = rgProperties;
rgPropSets[cPropSets].guidPropertySet = DBPROPSET_DBINIT;
cPropSets++;
}
// Initialize
if (SUCCEEDED(hr))
hr = pIDBProperties->SetProperties(cPropSets, rgPropSets);
if (SUCCEEDED(hr))
hr = pIDBInitialize->Initialize();
if (SUCCEEDED(hr)) {
printf("\tConnected!\r\n");
}
else
printf("Unable to connect\r\n");
// Set fastload prop
if (SUCCEEDED(hr))
hr = SetFastLoadProperty(pIDBInitialize);
if (SUCCEEDED(hr))
hr = pIDBInitialize->QueryInterface(IID_IDBCreateSession, (void **)&pIDBCrtSess);
if (SUCCEEDED(hr))
hr = pIDBCrtSess->CreateSession(NULL, IID_IOpenRowset, (IUnknown **)&pIOpenRowset);
if (SUCCEEDED(hr))
hr = pIOpenRowset->OpenRowset(NULL, &TableID, NULL, IID_IRowsetFastLoad, 0, NULL, (IUnknown **)&pIRowsetFastLoad);
if (SUCCEEDED(hr))
hr = pIRowsetFastLoad->QueryInterface(IID_IAccessor, (void **)&pIAccessor);
if (SUCCEEDED(hr))
hr = pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA, 3, rgBinding, ulOffset, &hAcc, (DBBINDSTATUS *)&rgStatus);
if (SUCCEEDED(hr)) {
pData = (BYTE *)malloc(ulOffset);
for (iRow = 0 ; iRow < MAX_ROWS ; iRow++) {
// Column 1 data
*(DBSTATUS *)(pData + rgBinding[0].obStatus) = DBSTATUS_S_OK;
*(DBLENGTH *)(pData + rgBinding[0].obLength) = 1234567; // Ignored for I4 data
*(LONG *)(pData + rgBinding[0].obValue) = iRow;
// Column 2 data
*(DBSTATUS *)(pData + rgBinding[1].obStatus) = DBSTATUS_S_OK;
*(DBLENGTH *)(pData + rgBinding[1].obLength) = 1234567; // Ignored for I4 data
*(LONG *)(pData + rgBinding[1].obValue) = iRow + 1;
// Column 3 data
*(DBSTATUS *)(pData + rgBinding[2].obStatus) = DBSTATUS_S_OK;
*(DBLENGTH *)(pData + rgBinding[2].obLength) = MAX_BLOB/(iRow + 1); // Not needed for providers that don't require length
#ifdef USE_ISEQSTREAM
// DBLENGTH is used to tell the provider how much BLOB data to expect from the stream, not required
// if provider supports sending data without length
*(ISequentialStream **)(pData+rgBinding[2].obValue) = (ISequentialStream *)pMySeqStream;
pMySeqStream->Init((void *)&bSrcBuf, sizeof(bSrcBuf), MAX_BLOB / (iRow + 1)); // Here we set the size we will let the provider read
pMySeqStream->AddRef(); // The provider releases the object, so we addref it so it doesn't get destructed
#else
memset(pData + rgBinding[2].obValue, 0, MAX_BLOB); // Not strictly necessary
memset(pData + rgBinding[2].obValue, 0x23, MAX_BLOB / (iRow + 1));
#endif
if (SUCCEEDED(hr))
hr = pIRowsetFastLoad->InsertRow(hAcc, pData);
}
}
if (SUCCEEDED(hr))
hr = pIRowsetFastLoad->Commit(TRUE);
if (hAcc)
pIAccessor->ReleaseAccessor(hAcc, NULL);
SAFE_RELEASE(pIDBInitialize);
SAFE_RELEASE(pIDBCrtSess);
SAFE_RELEASE(pIOpenRowset);
SAFE_RELEASE(pIDBCrtCmd);
SAFE_RELEASE(pICmdText);
SAFE_RELEASE(pIAccessor);
SAFE_RELEASE(pIRowsetFastLoad);
SAFE_RELEASE(pIDBProperties);
#ifdef USE_ISEQSTREAM
SAFE_RELEASE(pMySeqStream);
#endif
if (pData)
free(pData);
CoUninitialize();
}
use master
drop table fltest