Configure a SQL Server Availability Group for read-scale on Linux

Artikel
11/18/2024

Applies to: SQL Server - Linux

This article explains how to create a SQL Server Always On Availability Group (AG) on Linux without a cluster manager. This architecture provides read-scale only. It doesn't provide high availability.

There are two types of architectures for AGs. An architecture for high availability uses a cluster manager to provide improved business continuity. To create the high-availability architecture, see Configure SQL Server Always On Availability Group for high availability on Linux.

An availability group with CLUSTER_TYPE = NONE can include replicas hosted on different operating system platforms. It can't support high availability.

Prerequisites

Before you create the availability group, you need to:

Set your environment so that all the servers that will host availability replicas can communicate.
Install SQL Server.

On Linux, you must create an availability group before you add it as a cluster resource to be managed by the cluster. This document provides an example that creates the availability group.

Update the computer name for each host.

Each SQL Server instance name must be:
- 15 characters or fewer.
- Unique within the network.
To set the computer name, edit /etc/hostname. The following script lets you edit /etc/hostname with vi:
```
sudo vi /etc/hostname
```
Configure the hosts file.

Note

If hostnames are registered with their IP address in the DNS server, you don't need to do the following steps. Validate that all the nodes intended to be part of the availability group configuration can communicate with each other. (A ping to the hostname should reply with the corresponding IP address.) Also, make sure that the /etc/hosts file doesn't contain a record that maps the localhost IP address 127.0.0.1 with the hostname of the node.

The hosts file on every server contains the IP addresses and names of all servers that will participate in the availability group.

The following command returns the IP address of the current server:
```
sudo ip addr show
```
Update /etc/hosts. The following script lets you edit /etc/hosts with vi:
```
sudo vi /etc/hosts
```
The following example shows /etc/hosts on node1 with additions for node1, node2, and node3. In this sample, node1 refers to the server that hosts the primary replica, and node2 and node3 refer to servers that host the secondary replicas.
```
127.0.0.1    localhost localhost4 localhost4.localdomain4
::1          localhost localhost6 localhost6.localdomain6
10.128.18.12 node1
10.128.16.77 node2
10.128.15.33 node3
```

Install SQL Server

Install SQL Server. The following links point to SQL Server installation instructions for various distributions:

Enable Always On availability groups

Enable Always On availability groups for each node that hosts a SQL Server instance, and then restart mssql-server. Run the following script:

sudo /opt/mssql/bin/mssql-conf set hadr.hadrenabled 1
sudo systemctl restart mssql-server

Enable an AlwaysOn_health Event session

You can optionally enable Extended Events (XE) to help with root-cause diagnosis when you troubleshoot an availability group. Run the following command on each instance of SQL Server:

ALTER EVENT SESSION AlwaysOn_health ON SERVER
WITH
(
        STARTUP_STATE = ON
);
GO

For more information about this XE session, see Configure Extended Events for availability groups.

Create a certificate

The SQL Server service on Linux uses certificates to authenticate communication between the mirroring endpoints.

The following Transact-SQL script creates a master key and a certificate. It then backs up the certificate and secures the file with a private key. Update the script with strong passwords. Connect to the primary SQL Server instance. To create the certificate, run the following Transact-SQL script:

CREATE MASTER KEY ENCRYPTION BY PASSWORD = '<master-key-password>';

CREATE CERTIFICATE dbm_certificate
    WITH SUBJECT = 'dbm';

BACKUP CERTIFICATE dbm_certificate
    TO FILE = '/var/opt/mssql/data/dbm_certificate.cer'
    WITH PRIVATE KEY (
        FILE = '/var/opt/mssql/data/dbm_certificate.pvk',
        ENCRYPTION BY PASSWORD = '<private-key-password>'
);

At this point, your primary SQL Server replica has a certificate at /var/opt/mssql/data/dbm_certificate.cer and a private key at var/opt/mssql/data/dbm_certificate.pvk. Copy these two files to the same location on all servers that will host availability replicas. Use the mssql user, or give permission to the mssql user to access these files.

For example, on the source server, the following command copies the files to the target machine. Replace the <node2> values with the names of the SQL Server instances that will host the replicas.

cd /var/opt/mssql/data
scp dbm_certificate.* root@<node2>:/var/opt/mssql/data/

On each target server, give permission to the mssql user to access the certificate.

cd /var/opt/mssql/data
chown mssql:mssql dbm_certificate.*

Create the certificate on secondary servers

The following Transact-SQL script creates a master key and a certificate from the backup that you created on the primary SQL Server replica. Update the script with strong passwords. The decryption password is the same password that you used to create the .pvk file in a previous step. To create the certificate, run the following script on all secondary servers:

CREATE MASTER KEY ENCRYPTION BY PASSWORD = '<master-key-password>';

CREATE CERTIFICATE dbm_certificate
    FROM FILE = '/var/opt/mssql/data/dbm_certificate.cer'
    WITH PRIVATE KEY (
        FILE = '/var/opt/mssql/data/dbm_certificate.pvk',
        DECRYPTION BY PASSWORD = '<private-key-password>'
);

In the previous example, replace <private-key-password> with the same password you used when creating the certificate on the primary replica.

Create the database mirroring endpoints on all replicas

Database mirroring endpoints use the Transmission Control Protocol (TCP) to send and receive messages between the server instances that participate in database mirroring sessions, or host availability replicas. The database mirroring endpoint listens on a unique TCP port number.

The following Transact-SQL script creates a listening endpoint named Hadr_endpoint for the availability group. It starts the endpoint and gives connection permission to the certificate that you created. Before you run the script, replace the values between < ... >. Optionally you can include an IP address LISTENER_IP = (0.0.0.0). The listener IP address must be an IPv4 address. You can also use 0.0.0.0.

Update the following Transact-SQL script for your environment on all SQL Server instances:

CREATE ENDPOINT [Hadr_endpoint]
    AS TCP
(
            LISTENER_PORT = 5022
)
    FOR DATABASE_MIRRORING
(
            ROLE = ALL,
            AUTHENTICATION = CERTIFICATE dbm_certificate,
            ENCRYPTION = REQUIRED ALGORITHM AES
);

ALTER ENDPOINT [Hadr_endpoint]
    STATE = STARTED;

Note

If you use SQL Server Express edition on one node to host a configuration-only replica, the only valid value for ROLE is WITNESS. Run the following script on SQL Server Express edition:

CREATE ENDPOINT [Hadr_endpoint]
    AS TCP
(
            LISTENER_PORT = 5022
)
    FOR DATABASE_MIRRORING
(
            ROLE = WITNESS,
            AUTHENTICATION = CERTIFICATE dbm_certificate,
            ENCRYPTION = REQUIRED ALGORITHM AES
);

ALTER ENDPOINT [Hadr_endpoint]
    STATE = STARTED;

The TCP port on the firewall must be open for the listener port.

Important

For SQL Server 2017 (14.x), the only authentication method supported for the database mirroring endpoint is CERTIFICATE. The WINDOWS option isn't available.

For more information, see The Database Mirroring Endpoint (SQL Server).

Create the availability group

Create the AG. Set CLUSTER_TYPE = NONE. In addition, set each replica with FAILOVER_MODE = MANUAL. Client applications running analytics or reporting workloads can directly connect to the secondary databases. You also can create a read-only routing list. Connections to the primary replica forward read connection requests to each of the secondary replicas from the routing list in a round-robin fashion.

The following Transact-SQL script creates an AG named ag1. The script configures the AG replicas with SEEDING_MODE = AUTOMATIC. This setting causes SQL Server to automatically create the database on each secondary server after it's added to the AG. Update the following script for your environment. Replace the <node1> and <node2> values with the names of the SQL Server instances that host the replicas. Replace the <5022> value with the port you set for the endpoint. Run the following Transact-SQL script on the primary SQL Server replica:

CREATE AVAILABILITY GROUP [ag1]
    WITH (CLUSTER_TYPE = NONE)
    FOR REPLICA ON
        N'<node1>' WITH (
            ENDPOINT_URL = N'tcp://<node1>:<5022>',
            AVAILABILITY_MODE = ASYNCHRONOUS_COMMIT,
            FAILOVER_MODE = MANUAL,
            SEEDING_MODE = AUTOMATIC,
                    SECONDARY_ROLE (ALLOW_CONNECTIONS = ALL)
        ),
        N'<node2>' WITH (
            ENDPOINT_URL = N'tcp://<node2>:<5022>',
            AVAILABILITY_MODE = ASYNCHRONOUS_COMMIT,
            FAILOVER_MODE = MANUAL,
            SEEDING_MODE = AUTOMATIC,
            SECONDARY_ROLE (ALLOW_CONNECTIONS = ALL)
        );

ALTER AVAILABILITY GROUP [ag1] GRANT CREATE ANY DATABASE;

Join secondary SQL Server instances to the AG

The following Transact-SQL script joins a server to an AG named ag1. Update the script for your environment. On each secondary SQL Server replica, run the following Transact-SQL script to join the AG:

ALTER AVAILABILITY GROUP [ag1] JOIN WITH (CLUSTER_TYPE = NONE);

ALTER AVAILABILITY GROUP [ag1] GRANT CREATE ANY DATABASE;

Add a database to the availability group

Ensure that the database you add to the availability group is in the full recovery model and has a valid log backup. If your database is a test database or a newly created database, take a database backup. On the primary SQL Server, run the following Transact-SQL (T-SQL) script to create and back up a database called db1:

CREATE DATABASE [db1];
GO

ALTER DATABASE [db1]
    SET RECOVERY FULL;
GO

BACKUP DATABASE [db1]
    TO DISK = N'/var/opt/mssql/data/db1.bak';

On the primary SQL Server replica, run the following T-SQL script to add a database called db1 to an availability group called ag1:

ALTER AVAILABILITY GROUP [ag1] ADD DATABASE [db1];

Verify that the database is created on the secondary servers

On each secondary SQL Server replica, run the following query to see if the db1 database was created and is synchronized:

SELECT *
FROM sys.databases
WHERE name = 'db1';
GO

SELECT DB_NAME(database_id) AS 'database',
       synchronization_state_desc
FROM sys.dm_hadr_database_replica_states;
GO

This AG isn't a high-availability configuration. If you need high availability, follow the instructions at Configure SQL Server Always On Availability Group for high availability on Linux. Specifically, create the AG with CLUSTER_TYPE=WSFC (in Windows) or CLUSTER_TYPE=EXTERNAL (in Linux). You can then integrate with a cluster manager, by using either Windows Server failover clustering on Windows, or Pacemaker on Linux.

Connect to read-only secondary replicas

There are two ways to connect to read-only secondary replicas. Applications can connect directly to the SQL Server instance that hosts the secondary replica and query the databases. They also can use read-only routing, which requires a listener.

Fail over the primary replica on a read-scale AG

Each availability group has only one primary replica. The primary replica allows reads and writes. To change which replica is primary, you can fail over. In a typical availability group, the cluster manager automates the failover process. In an availability group with cluster type NONE, the failover process is manual.

There are two ways to fail over the primary replica in an availability group with cluster type NONE:

Manual failover without data loss
Forced manual failover with data loss

Manual failover without data loss

Use this method when the primary replica is available, but you need to temporarily or permanently change which instance hosts the primary replica. To avoid potential data loss, before you issue the manual failover, ensure that the target secondary replica is up to date.

To manually fail over without data loss:

Make the current primary and target secondary replica SYNCHRONOUS_COMMIT.

ALTER AVAILABILITY GROUP [AGRScale] 
     MODIFY REPLICA ON N'<node2>' 
     WITH (AVAILABILITY_MODE = SYNCHRONOUS_COMMIT);

To identify that active transactions are committed to the primary replica and at least one synchronous secondary replica, run the following query:

SELECT ag.name, 
   drs.database_id, 
   drs.group_id, 
   drs.replica_id, 
   drs.synchronization_state_desc, 
   ag.sequence_number
FROM sys.dm_hadr_database_replica_states drs, sys.availability_groups ag
WHERE drs.group_id = ag.group_id;

The secondary replica is synchronized when synchronization_state_desc is SYNCHRONIZED.

Update REQUIRED_SYNCHRONIZED_SECONDARIES_TO_COMMIT to 1.

The following script sets REQUIRED_SYNCHRONIZED_SECONDARIES_TO_COMMIT to 1 on an availability group named ag1. Before you run the following script, replace ag1 with the name of your availability group:
```
ALTER AVAILABILITY GROUP [AGRScale] 
     SET (REQUIRED_SYNCHRONIZED_SECONDARIES_TO_COMMIT = 1);
```
This setting ensures that every active transaction is committed to the primary replica and at least one synchronous secondary replica.

Note

This setting is not specific to failover and should be set based on the requirements of the environment.
Set the primary replica and the secondary replica(s) not participating in the failover offline to prepare for the role change:
```
ALTER AVAILABILITY GROUP [AGRScale] OFFLINE
```

Promote the target secondary replica to primary.

ALTER AVAILABILITY GROUP AGRScale FORCE_FAILOVER_ALLOW_DATA_LOSS;

Update the role of the old primary and other secondaries to SECONDARY, run the following command on the SQL Server instance that hosts the old primary replica:
```
ALTER AVAILABILITY GROUP [AGRScale] 
     SET (ROLE = SECONDARY); 
```
Note

To delete an availability group, use DROP AVAILABILITY GROUP. For an availability group that's created with cluster type NONE or EXTERNAL, execute the command on all replicas that are part of the availability group.
Resume data movement, run the following command for every database in the availability group on the SQL Server instance that hosts the primary replica:
```
ALTER DATABASE [db1]
     SET HADR RESUME
```
Re-create any listener you created for read-scale purposes and that isn't managed by a cluster manager. If the original listener points to the old primary, drop it and re-create it to point to the new primary.

Forced manual failover with data loss

If the primary replica is not available and can't immediately be recovered, then you need to force a failover to the secondary replica with data loss. However, if the original primary replica recovers after failover, it will assume the primary role. To avoid having each replica be in a different state, remove the original primary from the availability group after a forced failover with data loss. Once the original primary comes back online, remove the availability group from it entirely.

To force a manual failover with data loss from primary replica N1 to secondary replica N2, follow these steps:

On the secondary replica (N2), initiate the forced failover:

ALTER AVAILABILITY GROUP [AGRScale] FORCE_FAILOVER_ALLOW_DATA_LOSS;

On the new primary replica (N2), remove the original primary (N1):
```
ALTER AVAILABILITY GROUP [AGRScale]
REMOVE REPLICA ON N'N1';
```
Validate that all application traffic is pointed to the listener and/or the new primary replica.
If the original primary (N1) comes online, immediately take availability group AGRScale offline on the original primary (N1):
```
ALTER AVAILABILITY GROUP [AGRScale] OFFLINE
```
If there is data or unsynchronized changes, preserve this data via backups or other data replicating options that suit your business needs.
Next, remove the availability group from the original primary (N1):
```
DROP AVAILABILITY GROUP [AGRScale];
```
Drop the availability group database on original primary replica (N1):
```
USE [master]
GO
DROP DATABASE [AGDBRScale]
GO
```
(Optional) If desired, you can now add N1 back as a new secondary replica to the availability group AGRScale.

Dela via

Configure a SQL Server Availability Group for read-scale on Linux

Prerequisites

Install SQL Server

Enable Always On availability groups

Enable an AlwaysOn_health Event session

Create a certificate

Create the certificate on secondary servers

Create the database mirroring endpoints on all replicas

Create the availability group

Join secondary SQL Server instances to the AG

Add a database to the availability group

Verify that the database is created on the secondary servers

Connect to read-only secondary replicas

Fail over the primary replica on a read-scale AG

Manual failover without data loss

Forced manual failover with data loss

Feedback

Ytterligare resurser

Dela via

Configure a SQL Server Availability Group for read-scale on Linux

Prerequisites

Install SQL Server

Enable Always On availability groups

Enable an AlwaysOn_health Event session

Create a certificate

Create the certificate on secondary servers

Create the database mirroring endpoints on all replicas

Create the availability group

Join secondary SQL Server instances to the AG

Add a database to the availability group

Verify that the database is created on the secondary servers

Connect to read-only secondary replicas

Fail over the primary replica on a read-scale AG

Manual failover without data loss

Forced manual failover with data loss

Related content

Feedback

Ytterligare resurser