Tutorial: Use Active Directory authentication with SQL Server on Linux

Artikel
11/18/2024

Applies to: SQL Server - Linux

This tutorial explains how to configure SQL Server on Linux to support Active Directory authentication, also known as integrated authentication. For an overview, see Active Directory authentication for SQL Server on Linux.

This tutorial consists of the following tasks:

Join SQL Server host to Active Directory domain
Create Active Directory user for SQL Server and set SPN
Configure SQL Server service keytab
Secure the keytab file
Configure SQL Server to use the keytab file for Kerberos authentication
Create Active Directory-based logins in Transact-SQL
Connect to SQL Server using Active Directory Authentication

Prerequisites

Before you configure Active Directory Authentication, you need to:

Set up an Active Directory Domain Controller (Windows) on your network
Install SQL Server

Join SQL Server host to Active Directory domain

Join your SQL Server Linux host with an Active Directory domain controller. For information on how to join an active directory domain, see Join SQL Server on a Linux host to an Active Directory domain.

Create Active Directory user for SQL Server and set SPN

Note

The following steps use your fully qualified domain name (FQDN). If you're on Azure, you must create a FQDN before you proceed.

On your domain controller, run the New-ADUser PowerShell command to create a new Active Directory user with a password that never expires. The following example names the account sqlsvc, but the account name can be anything you like. You'll be prompted to enter a new password for the account.
```
Import-Module ActiveDirectory

New-ADUser sqlsvc -AccountPassword (Read-Host -AsSecureString "Enter Password") -PasswordNeverExpires $true -Enabled $true
```
Note

It's a security best practice to have a dedicated Active Directory account for SQL Server, so that the SQL Server instance credentials aren't shared with other services using the same account. However, you can optionally reuse an existing Active Directory account if you know the account's password (which is required to generate a keytab file in the next step). Additionally, the account should be enabled to support 128-bit and 256-bit Kerberos AES encryption (msDS-SupportedEncryptionTypes attribute) on the user account. To validate the account is enabled for AES encryption, locate the account in Active Directory Users and Computers utility, and select Properties. Locate the Accounts tab in Properties, and validate the two following checkboxes are selected.
1. This account supports Kerberos AES 128 bit encryption
2. This account supports Kerberos AES 256 bit encryption
Set the ServicePrincipalName (SPN) for this account using the setspn.exe tool. The SPN must be formatted exactly as specified in the following example. You can find the fully qualified domain name of the SQL Server host machine by running hostname --all-fqdns on the SQL Server host. The TCP port should be 1433 unless you have configured SQL Server to use a different port number.
```
setspn -A MSSQLSvc/<fully qualified domain name of host machine>:<tcp port> sqlsvc
setspn -A MSSQLSvc/<netbios name of the host machine>:<tcp port> sqlsvc
```
Note

If you receive an error, Insufficient access rights, check with your domain administrator that you have sufficient permissions to set an SPN on this account. The account that is used to register an SPN will need the Write servicePrincipalName permissions. For more information, see Register a Service Principal Name for Kerberos connections.

If you change the TCP port in the future, you must run the setspn command again with the new port number. You also need to add the new SPN to the SQL Server service keytab by following the steps in the next section.

For more information, see Register a Service Principal Name for Kerberos connections.

Configure SQL Server service keytab

Configuring Active Directory authentication for SQL Server on Linux requires an Active Directory user account and the SPN created in the previous section.

Important

If the password for the Active Directory account is changed or the password for the account that the SPNs are assigned to is changed, you must update the keytab with the new password and Key Version Number (KVNO). Some services might also rotate the passwords automatically. Review any password rotation policies for the accounts in question and align them with scheduled maintenance activities to avoid unexpected downtime.

SPN keytab entries

Check the Key Version Number (KVNO) for the Active Directory account created in the previous step. Usually it's 2, but it could be another integer if you changed the account's password multiple times. On the SQL Server host machine, run the following commands:
- The below examples assume the user is in the @CONTOSO.COM domain. Modify the user and domain name to your user and domain name.
```
kinit user@CONTOSO.COM
kvno user@CONTOSO.COM
kvno MSSQLSvc/<fully qualified domain name of host machine>:<tcp port>@CONTOSO.COM
```
Note

SPNs can take several minutes to propagate through your domain, especially if the domain is large. If you receive the error, kvno: Server not found in Kerberos database while getting credentials for MSSQLSvc/<fully qualified domain name of host machine>:<tcp port>@CONTOSO.COM, please wait a few minutes and try again.

The above commands will only work if the server has been joined to an Active Directory domain, which was covered in the previous section.

Using ktpass, add keytab entries for each SPN using the following commands on a Windows machine Command Prompt:

<DomainName>\<UserName> - Active Directory user account
@CONTOSO.COM - Use your domain name
/kvno <#> - Replace <#> with the KVNO obtained in an earlier step
<password> - Your password should follow the SQL Server default password policy. By default, the password must be at least eight characters long and contain characters from three of the following four sets: uppercase letters, lowercase letters, base-10 digits, and symbols. Passwords can be up to 128 characters long. Use passwords that are as long and complex as possible.

ktpass /princ MSSQLSvc/<fully qualified domain name of host machine>:<tcp port>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto aes256-sha1 /mapuser <DomainName>\<UserName> /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

ktpass /princ MSSQLSvc/<fully qualified domain name of host machine>:<tcp port>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto rc4-hmac-nt /mapuser <DomainName>\<UserName> /in mssql.keytab /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

ktpass /princ MSSQLSvc/<netbios name of the host machine>:<tcp port>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto aes256-sha1 /mapuser <DomainName>\<UserName> /in mssql.keytab /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

ktpass /princ MSSQLSvc/<netbios name of the host machine>:<tcp port>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto rc4-hmac-nt /mapuser <DomainName>\<UserName> /in mssql.keytab /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

ktpass /princ <UserName>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto aes256-sha1 /mapuser <DomainName>\<UserName> /in mssql.keytab /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

ktpass /princ <UserName>@CONTOSO.COM /ptype KRB5_NT_PRINCIPAL /crypto rc4-hmac-nt /mapuser <DomainName>\<UserName> /in mssql.keytab /out mssql.keytab -setpass -setupn /kvno <#> /pass <password>

The previous commands allow both AES and RC4 encryption ciphers for Active Directory authentication. RC4 is an older encryption cipher and if a higher degree of security is required, you can choose to create the keytab entries with only the AES encryption cipher.

Note

The last two UserName entries must be in lowercase, or the permission authentication can fail.

After executing the previous commands, you should have a keytab file named mssql.keytab. Copy the file over to the SQL Server machine under the folder /var/opt/mssql/secrets.
Secure the keytab file.

Anyone with access to this keytab file can impersonate SQL Server on the domain, so make sure you restrict access to the file such that only the mssql account has read access:
```
sudo chown mssql:mssql /var/opt/mssql/secrets/mssql.keytab
sudo chmod 400 /var/opt/mssql/secrets/mssql.keytab
```
The following configuration option needs to be set with the mssql-conf tool to specify the account to be used while accessing the keytab file.
```
sudo mssql-conf set network.privilegedadaccount <username>
```
Note

Only include the username and not domainname\username or username@domain. SQL Server internally adds domain name as required along with this username when used.
Use the following steps to configure SQL Server to start using the keytab file for Kerberos authentication.
```
sudo mssql-conf set network.kerberoskeytabfile /var/opt/mssql/secrets/mssql.keytab
sudo systemctl restart mssql-server
```
Tip

Optionally, disable UDP connections to the domain controller to improve performance. In many cases, UDP connections consistently fail when connecting to a domain controller, so you can set config options in /etc/krb5.conf to skip UDP calls. Edit /etc/krb5.conf and set the following options:
```
/etc/krb5.conf
[libdefaults]
udp_preference_limit=0
```

At this point, you're ready to use Active Directory-based logins in SQL Server.

Create Active Directory-based logins in Transact-SQL

Connect to SQL Server and create a new, Active Directory-based login:
```
CREATE LOGIN [CONTOSO\user]
    FROM WINDOWS;
```
Verify that the login is now listed in the sys.server_principals system catalog view:
```
SELECT name
FROM sys.server_principals;
```

Connect to SQL Server using Active Directory authentication

Sign in to a client machine using your domain credentials. Now you can connect to SQL Server without reentering your password by using Active Directory authentication. If you create a login for an Active Directory group, any Active Directory user who is a member of that group can connect in the same way.

The specific connection string parameter for clients to use Active Directory authentication depends on which driver you're using. Consider the examples in the following sections.

sqlcmd on a domain-joined Linux client

ssh -l user@contoso.com client.contoso.com

Make sure you've installed the mssql-tools package, then connect using sqlcmd without specifying any credentials:

sqlcmd -S mssql-host.contoso.com

Different from SQL Windows, Kerberos authentication works for local connection in SQL Linux. However, you still need to provide the FQDN of the SQL Linux host, and Active Directory authentication won't work if you attempt to connect to ., localhost, 127.0.0.1, etc.

SSMS on a domain-joined Windows client

Sign in to a domain-joined Windows client using your domain credentials. Make sure SQL Server Management Studio is installed, then connect to your SQL Server instance (for example, mssql-host.contoso.com) by specifying Windows Authentication in the Connect to Server dialog.

Active Directory authentication using other client drivers

The following table describes recommendations for other client drivers:

Client driver	Recommendation
JDBC	Use Kerberos Integrated Authentication to Connect SQL Server.
ODBC	Use Integrated Authentication.
ADO.NET	Connection String Syntax.

Additional configuration options

If you're using third-party utilities such as PBIS, VAS, or Centrify to join the Linux host to Active Directory domain and you would like to force SQL Server to use the OpenLDAP library directly, you can configure the disablesssd option with mssql-conf as follows:

sudo mssql-conf set network.disablesssd true
systemctl restart mssql-server

Note

There are utilities such as realmd which set up SSSD, while other tools such as PBIS, VAS and Centrify don't setup SSSD. If the utility used to join Active Directory domain doesn't setup SSSD, you should configure disablesssd option to true. While it's not required as SQL Server will attempt to use SSSD for Active Directory before falling back to OpenLDAP mechanism, it would be more performant to configure it so SQL Server makes OpenLDAP calls directly bypassing the SSSD mechanism.

If your domain controller supports LDAPS, you can force all connections from SQL Server to the domain controllers to be over LDAPS. To check your client can contact the domain controller over LDAPS, run the following bash command, ldapsearch -H ldaps://contoso.com:3269. To set SQL Server to only use LDAPS, run the following:

sudo mssql-conf set network.forcesecureldap true
systemctl restart mssql-server

This will use LDAPS over SSSD if Active Directory domain join on host was done via SSSD package and disablesssd isn't set to true. If disablesssd is set to true along with forcesecureldap being set to true, then it will use LDAPS protocol over OpenLDAP library calls made by SQL Server.

Post SQL Server 2017 CU 14

Starting with SQL Server 2017 (14.x) CU 14, if SQL Server was joined to an Active Directory domain controller using third-party providers and is configured to use OpenLDAP calls for general Active Directory lookup by setting disablesssd to true, you can also use enablekdcfromkrb5 option to force SQL Server to use krb5 library for KDC lookup instead of reverse DNS lookup for KDC server.

This might be useful for the scenario where you want to manually configure the domain controllers that SQL Server attempts to communicate with. And you use the OpenLDAP library mechanism by using the KDC list in krb5.conf.

First, set disablesssd and enablekdcfromkrb5conf to true and then restart SQL Server:

sudo mssql-conf set network.disablesssd true
sudo mssql-conf set network.enablekdcfromkrb5conf true
systemctl restart mssql-server

Then configure the KDC list in /etc/krb5.conf as follows:

[realms]
CONTOSO.COM = {
  kdc = dcWithGC1.contoso.com
  kdc = dcWithGC2.contoso.com
}

While it's not recommended, it's possible to use utilities, such as realmd, that set up SSSD while joining the Linux host to the domain, while configuring disablesssd to true so that SQL Server uses OpenLDAP calls instead of SSSD for Active Directory related calls.

Note

SQL Server login by using an FQDN (for example, CONTOSO.COM\Username) isn't supported. Use the CONTOSO\Username format.

SQL Server logins from Domain Local groups aren't supported. Use Global Security Domain groups instead.

Contribute to SQL documentation

Did you know that you can edit SQL content yourself? If you do so, not only do you help improve our documentation, but you also get credited as a contributor to the page.

For more information, see How to contribute to SQL Server documentation

Dela via

Tutorial: Use Active Directory authentication with SQL Server on Linux

Prerequisites

Join SQL Server host to Active Directory domain

Create Active Directory user for SQL Server and set SPN

Configure SQL Server service keytab

SPN keytab entries

Create Active Directory-based logins in Transact-SQL

Connect to SQL Server using Active Directory authentication

sqlcmd on a domain-joined Linux client

SSMS on a domain-joined Windows client

Active Directory authentication using other client drivers

Additional configuration options

Post SQL Server 2017 CU 14

Contribute to SQL documentation

Feedback

Ytterligare resurser

Dela via

Tutorial: Use Active Directory authentication with SQL Server on Linux

Prerequisites

Join SQL Server host to Active Directory domain

Create Active Directory user for SQL Server and set SPN

Configure SQL Server service keytab

SPN keytab entries

Create Active Directory-based logins in Transact-SQL

Connect to SQL Server using Active Directory authentication

sqlcmd on a domain-joined Linux client

SSMS on a domain-joined Windows client

Active Directory authentication using other client drivers

Additional configuration options

Post SQL Server 2017 CU 14

Related content

Contribute to SQL documentation

Feedback

Ytterligare resurser