What Is ImageX?
Applies To: Windows 7
Note
This content applies to Windows 7. For Windows 8 content, see Windows Deployment with the Windows ADK.
ImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, modify, and apply file-based disk images for rapid deployment. ImageX works with Windows® image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack.
This topic includes:
Benefits of ImageX
Common ImageX Scenarios
Limitations of ImageX
Dependencies of ImageX
Technologies Related to ImageX
Benefits of ImageX
The limitations of sector-based imaging led Microsoft® to develop the ImageX tool and the accompanying Windows image (.wim) file format. You can use ImageX to create an image, to modify the image without extracting and recreating the image, and to deploy the image to your environment. Because ImageX works at the file level, it provides the following capabilities:
More flexibility and control over the deployed media.
Rapid extraction of images to decrease setup time.
Reduced image size due to "single instancing", which means that the file data is stored separately from the path information. This enables files that exist in multiple paths or in multiple images to be stored once and shared across the images.
Non-destructive image application. The ImageX tool does not perform an all-inclusive overwrite of the contents of your drive. You can selectively add and remove information.
The ability to work across any platform supported by Windows.
Two different compression algorithms, Fast and Maximum, to reduce your image size further.
The ability to treat an image file like a directory. For example, you can add, copy, paste, and delete files from a file management tool, such as Windows Explorer.
Many OEMs and corporations need to deploy and install Windows as rapidly as possible, including all relevant updates, applications, and settings. Reduced deployment and installation time lower manufacturing costs for OEMs, and can decrease cost and scheduling risks for corporate deployments.
In the past, if OEMs and corporations needed to minimize the amount of time required to install Windows, they used sector-based imaging formats or the xcopy command to copy an installation of Windows onto new hardware.
The sector-based imaging format and the xcopy command have certain limitations. Sector-based imaging:
Requires that the destination computer use the same Hardware Abstraction Layer (HAL) as the reference computer.
Requires that the destination computer boot from the same mass-storage controller as the reference computer.
Destroys the existing contents of the destination computer’s hard drive, complicating Windows deployment scenarios.
Duplicates the hard drive exactly; therefore, the image can deploy only on partitions of the same type as the reference computer, and are at least as large as the partition on the reference computer.
Does not enable direct modification of imaged files.
Might require the purchase of third-party applications and services.
Common ImageX Scenarios
ImageX is a command-line tool that enables the creation, the modification, and the deployment of images, by using a shared imaging format across operating system images, including applications. The following scenarios are particularly compatible with the ImageX process.
Important
If you intend to transfer a Windows image to a different computer, you must run sysprep with the /generalize option, even if the computer has the same hardware configuration. The sysprep /generalize command removes unique information from your Windows installation, which enables you to reuse that image on different computers.
The next time you boot the Windows image, the specialize configuration pass runs. During this configuration pass, many components have actions that must be processed when you boot a Windows image on a new computer.
Any method of moving a Windows image to a new computer, either through imaging, hard disk duplication, or any other method, must be prepared with the sysprep /generalize command. Moving or copying a Windows image to a different computer without running the sysprep /generalize command is not supported.
Creating an Image for Rapid Deployment
The most common scenario for ImageX is capturing and applying an image from a network location for rapid deployment. This scenario requires booting your technician computer into Windows PE, capturing the image with ImageX, putting the image on a network share, and then applying the image to the destination computers.
Modifying an Image File
Another common scenario for ImageX is customizing an existing image, including updating files and folders. This scenario involves adding, removing, editing, and copying files from your image by using the Windows Imaging File System Filter (WIMMount Filter) driver and a file management tool, such as Windows Explorer.
Limitations of ImageX
The ImageX tool has the following limitations:
You can use ImageX only to capture and to apply a full version of the operating system and software applications. You cannot use ImageX to capture and to apply upgrades to the operating system or applications.
You can use only formatted Windows image (.wim) files to interact with ImageX. Previous images, created with third-party imaging tools, cannot be used with ImageX.
You can use only a single compression type for a .wim file. Appended image files must use the same compression type as the initial capture.
You can mount an image only from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with SP1, and Windows® 7.
Note
Although ImageX cannot mount an image from a computer running any other operating system, it can capture and apply images for any version of Windows 7, Windows Vista, Windows Server 2003, Windows XP, and Windows 2000 Professional.
- You can mount a .wim file with read/write permissions only on an NTFS file system. This avoids the 2 gigabyte (GB) barrier that is imposed by FAT file systems and prevents data loss that is possible with FAT or other non-NTFS file systems.
Note
You can mount your image as read-only from NTFS, FAT, ISO, and UDF file systems. You cannot save changes to the image file while it is mounted as read-only. You cannot mount an image from a FAT32 system.
You can mount up to 20 .wim files on a system.
ImageX does not support mounting to a directory symbolic link. Symbolic links are transparent to users; the links appear as normal files or directories, and can be acted upon by the user or application in exactly the same manner.
You must use other Microsoft tools, such as Diskpart and Format, to prepare your disks for volume images. If you deploy the Sysprep image by using ImageX, you must deploy the image to the same volume.
You must disable system restore when running Windows image filter. Windows imaging filter might behave unexpectedly when copying files into the mount point.
The install DVD cannot be ejected while the image is mounted. The mount from DVD fails if the install DVD is ejected.
ImageX does not support capturing encrypted files from a Windows 2003 based Windows PE environment.
Do not run xcopy during the mount. Mountin from the DVD fails if xcopy is run during mount. On Windows 7, Windows XP and , running xcopy against a Windows image mounted from a DVD or a CD may cause the system to fail.
ImageX currently does not support the following NTFS features:
Extended attributes.
Object IDs.
Reparse points that are neither symbolic links nor junctions. ImageX will fail to apply them.
Sparse files. (They can be captured and applied, but they are no longer sparse after they are applied.)
Dependencies of ImageX
ImageX has the following dependencies:
By using Windows System Image Manager (Windows SIM), you can create an installation image that you capture later by using ImageX.
By using the Sysprep tool, you may prepare an image to be captured by ImageX. Running Sysprep on your master computer removes all user-specific and computer-specific settings and data, resets the product activation clock to 30 days, and enables the creation of a new security identifier (SID) upon restart. Once you have run Sysprep, you can boot your master computer into the Windows Preinstallation Environment (Windows PE) to capture the image. If you deploy the Sysprep image by using ImageX, you must deploy the image to the same volume.
You must boot your technician computer into the Windows PE environment. From Windows PE, you can run ImageX to capture your image. After you create the image, start your technician computer, install the WIMMount Filter driver, edit your image, and then apply the image from a network location.
Technologies Related to ImageX
ImageX is related to the following technologies.
Windows Deployment Services (Windows DS)
If you do not use ImageX for deployment, you may use Windows Deployment Services (Windows DS). Windows DS enables companies to remotely administer and deploy the latest operating system and other .wim files, by using Windows PE and Windows DS Server. This deployment scenario can be fully unattended, and is customizable and scalable.
Note
Windows DS replaces the existing Remote Operating System Installation (RIS) deployment technology.
Windows Preinstallation Environment (Windows PE)
Windows Preinstallation Environment (Windows PE) is a minimal Win32® operating system with limited services. Windows PE provides an environment from which ImageX can capture and apply images. Windows PE and ImageX are the primary tools used for Windows deployment.
Systems Management Server (SMS) Operating System Deployment Feature Pack
If you do not use ImageX for deployment, you can use the Systems Management Server (SMS) Operating System Deployment Feature Pack. The SMS Operating System Deployment Feature Pack enables companies to deploy the latest operating systems and applications in a customizable, centralized, and scalable way.