Set-HoldCompliancePolicy
This cmdlet is available only in Security & Compliance PowerShell. For more information, see Security & Compliance PowerShell.
Use the Set-HoldCompliancePolicy cmdlet to modify existing preservation policies in the Microsoft Purview compliance portal.
Note: The Set-HoldCompliancePolicy cmdlet has been replaced by the Set-RetentionCompliancePolicy cmdlet. If you have scripts that use Set-HoldCompliancePolicy, update them to use Set-RetentionCompliancePolicy.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Set-HoldCompliancePolicy
[-Identity] <PolicyIdParameter>
[-RetryDistribution]
[-Confirm]
[-WhatIf]
[<CommonParameters>] Set-HoldCompliancePolicy
[-Identity] <PolicyIdParameter>
[-AddExchangeLocation <MultiValuedProperty>]
[-AddPublicFolderLocation <MultiValuedProperty>]
[-AddSharePointLocation <MultiValuedProperty>]
[-Comment <String>]
[-Confirm]
[-Enabled <Boolean>]
[-Force]
[-RemoveExchangeLocation <MultiValuedProperty>]
[-RemovePublicFolderLocation <MultiValuedProperty>]
[-RemoveSharePointLocation <MultiValuedProperty>]
[-WhatIf]
[<CommonParameters>] Description
To use this cmdlet in Security & Compliance PowerShell, you need to be assigned permissions. For more information, see Permissions in the Microsoft Purview compliance portal.
Note: Don't use a piped Foreach-Object command when adding or removing scope locations: "Value1","Value2",..."ValueN" | Foreach-Object {Set-HoldCompliancePolicy -Identity "Regulation 123 Compliance" -RemoveExchangeLocation $_}.
Examples
Example 1
Set-HoldCompliancePolicy -Identity "Regulation 123 Compliance" -AddExchangeLocation "Kitty Petersen" -AddSharePointLocation "https://contoso.sharepoint.com/sites/teams/finance" -RemovePublicFolderLocation All -Comment "Added new counsel, 9/9/14"This example makes the following changes to the existing preservation policy named "Regulation 123 Compliance":
- Adds the mailbox for the user named Kitty Petersen.
- Adds the SharePoint Online site
https://contoso.sharepoint.com/sites/teams/finance. - Removes public folders.
- Updates the comment.
Parameters
-AddExchangeLocation
The AddExchangeLocation parameter specifies the mailboxes to add to the list of included mailboxes. Valid values are:
- A mailbox
- A distribution group or mail-enabled security group (all mailboxes that are currently members of the group).
To specify a mailbox or distribution group, you can use any value that uniquely identifies it. For example:
- Name
- Distinguished name (DN)
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-AddPublicFolderLocation
The AddPublicFolderLocation parameter specifies that you want to add all public folders to the preservation policy. You use the value All for this parameter.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-AddSharePointLocation
The AddSharePointLocation parameter specifies the SharePoint Online sites to add to the list of included sites when you aren't using the value All for the SharePointLocation parameter. You identify the site by its URL value.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
SharePoint Online sites can't be added to the policy until they have been indexed.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Comment
The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Enabled
The Enabled parameter specifies whether the policy is enabled. Valid values are:
- $true: The policy is enabled. This is the default value.
- $false: The policy is disabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Force
The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.
You can use this switch to run tasks programmatically where prompting for administrative input is inappropriate.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Identity
The Identity parameter specifies the preservation policy that you want to modify. You can use any value that uniquely identifies the policy. For example:
- Name
- Distinguished name (DN)
- GUID
| Type: | PolicyIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RemoveExchangeLocation
The RemoveExchangeLocation parameter specifies the existing mailboxes to remove from the policy. Valid values are:
- A mailbox
- A distribution group or mail-enabled security group
To specify a mailbox or distribution group, you can use any value that uniquely identifies it. For example:
- Name
- Distinguished name (DN)
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RemovePublicFolderLocation
The RemovePublicFolderLocation parameter specifies that you want to remove all public folders from the preservation policy. You use the value All for this parameter.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RemoveSharePointLocation
The RemoveSharePointLocation parameter specifies the SharePoint Online sites to remove from the list of included sites when you aren't using the value All for the SharePointLocation parameter. You identify the site by its URL value.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RetryDistribution
The RetryDistribution switch specifies whether to redistribute the policy to all Exchange Online and SharePoint Online locations. You don't need to specify a value with this switch.
Locations whose initial distributions succeeded aren't included in the retry. Policy distribution errors are reported when you use this switch.
Note: Because the process of retrying distribution is a significant operation, run it only if necessary and for one policy at a time. It is not intended to be run every time you update a policy. If you run a script to update multiple policies, wait until the policy distribution is successful before running the command again for the next policy.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-WhatIf
The WhatIf switch doesn't work in Security & Compliance PowerShell.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |