Set-CMTSStepPartitionDisk

Artikel
08/17/2021

SYNOPSIS

Konfigurera steget Formatera och partitionera disk i en aktivitetssekvens.

SYNTAX

ByValue (standard)

Set-CMTSStepPartitionDisk [-DiskNumber <Int32>] [-DiskNumberVariable <String>] [-DiskType <PartitionDiskStyle>]
 [-IsBootDisk <Boolean>] [-PartitionSetting <IResultObject[]>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] -InputObject <IResultObject> [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ById

Set-CMTSStepPartitionDisk [-DiskNumber <Int32>] [-DiskNumberVariable <String>] [-DiskType <PartitionDiskStyle>]
 [-IsBootDisk <Boolean>] [-PartitionSetting <IResultObject[]>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

ByName

Set-CMTSStepPartitionDisk [-DiskNumber <Int32>] [-DiskNumberVariable <String>] [-DiskType <PartitionDiskStyle>]
 [-IsBootDisk <Boolean>] [-PartitionSetting <IResultObject[]>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionIfStatement

Set-CMTSStepPartitionDisk [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionIfStatement

Set-CMTSStepPartitionDisk [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionIfStatement

Set-CMTSStepPartitionDisk [-Condition <IResultObject[]>] -InputObject <IResultObject>
 [-SetConditionIfStatement] [-StatementType <ConditionStatementType>] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionVariable

Set-CMTSStepPartitionDisk [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionVariable

Set-CMTSStepPartitionDisk [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionVariable

Set-CMTSStepPartitionDisk [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 -InputObject <IResultObject> [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionFile

Set-CMTSStepPartitionDisk [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceId <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFile

Set-CMTSStepPartitionDisk [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceName <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFile

Set-CMTSStepPartitionDisk [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] -InputObject <IResultObject> [-SetConditionFile]
 [-StepName <String>] [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionFolder

Set-CMTSStepPartitionDisk [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFolder

Set-CMTSStepPartitionDisk [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFolder

Set-CMTSStepPartitionDisk [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] -InputObject <IResultObject> [-SetConditionFolder] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionQueryWmi

Set-CMTSStepPartitionDisk -InputObject <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionOperatingSystem

Set-CMTSStepPartitionDisk -InputObject <IResultObject> [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionRegistry

Set-CMTSStepPartitionDisk -InputObject <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionSoftware

Set-CMTSStepPartitionDisk -InputObject <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionSoftware

Set-CMTSStepPartitionDisk [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionSoftware

Set-CMTSStepPartitionDisk [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionQueryWmi

Set-CMTSStepPartitionDisk [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionQueryWmi

Set-CMTSStepPartitionDisk [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionRegistry

Set-CMTSStepPartitionDisk [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceId <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionRegistry

Set-CMTSStepPartitionDisk [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceName <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionOperatingSystem

Set-CMTSStepPartitionDisk [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionOperatingSystem

Set-CMTSStepPartitionDisk [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

Konfigurera steget Formatera och partitionera disk i en aktivitetssekvens. Mer information om det här aktivitetssekvenssteget finns i Om aktivitetssekvenssteg.

Anteckning

Kör Konfigurationshanteraren cmdlets från Konfigurationshanteraren platsenheten, till exempel PS XYZ:\> . Mer information finns i Komma igång.

EXAMPLES

Exempel 1

{{ Add example code here }}

PARAMETERS

-AddCondition

Ange ett villkorsobjekt som ska läggas till i det här steget.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ClearCondition

Ta bort ett villkor från det här steget. Använd parametern -Condition för att ange villkoret som ska tas bort.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Condition

Ange ett villkorsobjekt som ska användas med det här steget.

Type: IResultObject[]
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: SubCondition, SubConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableName

Ange namnet på aktivitetssekvensvariabeln som ska användas som ett villkor.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Variable

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableValue

Ange värdet för aktivitetssekvensvariabeln som ska användas i ett villkor.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Value

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Uppmanar dig att bekräfta innan du kör cmdleten.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Beskrivning

Ange en valfri beskrivning för det här aktivitetssekvenssteget.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisableWildcardHandling

Den här parametern behandlar jokertecken som värden för literaltecken. Du kan inte kombinera den med ForceWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DiskNumber

Ange ett heltal för diskens fysiska disknummer som ska formateras. Antalet baseras på Windows diskuppräkningsordning.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DiskNumberVariable

Gäller för version 2006 och senare. Använd en aktivitetssekvensvariabel för att ange vilken måldisk som ska formateras. Det här variabelalternativet stöder mer komplexa aktivitetssekvenser med dynamiska beteenden. Mer information finns i Om aktivitetssekvenssteg – Format och Parition Disk.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DiskType

Ange vilken typ av disk som ska formateras:

Mbr: Master Boot Record
Gpt: GUID-partitionstabell

Type: PartitionDiskStyle
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: Mbr, Gpt

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileDateTimeOperator

Ange en variabeloperatortyp för ett filvillkor för datum/tid.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FilePath

Ange sökvägen till ett filvillkor.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileTimestamp

Ange ett datum-/tidsvärde som ska användas för ett filvillkor.

Type: DateTime
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileVersion

Ange en versionssträng för ett filvillkor.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderDateTimeOperator

Ange en variabeloperatortyp för ett datum/tid-villkor för mappen.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderPath

Ange sökvägen för ett mappvillkor.

Type: String
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderTimestamp

Ange ett datum-/tidsvärde som ska användas för ett mappvillkor.

Type: DateTime
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ForceWildcardHandling

Den här parametern bearbetar jokertecken och kan leda till oväntat beteende (rekommenderas inte). Du kan inte kombinera den med DisableWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Type: IResultObject
Parameter Sets: ByValue, ByValueSetConditionIfStatement, ByValueSetConditionVariable, ByValueSetConditionFile, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware
Aliases: TaskSequence

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-IsAnyVersion

Använd den här parametern med parametern SetConditionSoftware för att matcha alla versioner av produkten.

Type: Boolean
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsBootDisk

För en ny partition anger du den här parametern till true för att göra den till startpartitionen.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsContinueOnError

Använd den här parametern för att aktivera stegalternativet Fortsätt vid fel. Om steget misslyckas när du aktiverar det här alternativet fortsätter aktivitetssekvensen.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepContinueOnError

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsEnabled

Använd den här parametern för att aktivera det här aktivitetssekvenssteget.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepEnabled

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MoveToIndex

Flytta det här steget till den angivna indexpositionen i aktivitetssekvensen.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MsiFilePath

Ange sökvägen till en Windows Installer-fil för ett programvaruvillkor.

Type: String
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Namnområde

Ange namnområdet för ett WMI-frågevillkor.

Type: String[]
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-NewStepName

Använd den här parametern för att byta namn på det här aktivitetssekvenssteget.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-OperatorType

Ange en operator som ska användas med ett villkor för aktivitetssekvensvariabler.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-PartitionSetting

Ange en matris med partitionsinställningsobjekt.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: PartitionSettings

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Fråga

Ange en WMI-frågesträng som ska användas för ett villkor.

Type: String
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryKey

Ange den nyckel som ska användas med ett registervillkor.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryOperator

Ange en operator som ska användas med ett registervillkor.

Type: VariableOperatorType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueData

Ange de värdedata som ska användas med ett registervillkor.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueName

Ange det värdenamn som ska användas med ett registervillkor.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFile

Använd den här parametern för att ta bort ett filvillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFolder

Använd den här parametern för att ta bort ett mappvillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionIfStatement

Använd den här parametern för att ta bort if ett instruktionsvillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionOperatingSystem

Använd den här parametern för att ta bort ett operativsystemvillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionQueryWmi

Använd den här parametern för att ta bort ett WMI-frågevillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionRegistry

Använd den här parametern för att ta bort ett registervillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionSoftware

Använd den här parametern för att ta bort ett programvaruvillkor.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionVariable

Använd den här parametern för att ta bort ett villkor för aktivitetssekvensvariabler.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RootKey

Ange den rotnyckel som ska användas med ett registervillkor.

Type: RegistryRootKeyType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFile

Lägg till ett nytt filvillkor.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFolder

Lägg till ett nytt mappvillkor.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionIfStatement

Lägg till ett nytt if instruktionsvillkor.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionOperatingSystem

Lägg till ett nytt operativsystemvillkor.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionQueryWmi

Lägg till ett nytt WMI-frågevillkor.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionRegistry

Lägg till ett nytt registervillkor.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionSoftware

Lägg till ett nytt programvaruvillkor.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionVariable

Lägg till ett nytt villkor för aktivitetssekvensvariabeln.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StatementType

Ange typ för ett if instruktionsvillkor.

Type: ConditionStatementType
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: Operator
Accepted values: All, Any, None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepName

Ange namnet på det steg som ska väljas för ändringar.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepOrder

Använd den här parametern för att ordna om steget i aktivitetssekvensen.

Type: ReorderType
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: MoveUp, MoveDown, MoveToIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SupportedPlatform

Använd den här parametern för att ange plattformar för ett operativsystemvillkor.

Type: IResultObject[]
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: SupportedPlatforms

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceId

Ange ID för aktivitetssekvensen som ska vara mål för ändringar.

Type: String
Parameter Sets: ById, ByIdSetConditionIfStatement, ByIdSetConditionVariable, ByIdSetConditionFile, ByIdSetConditionFolder, ByIdSetConditionSoftware, ByIdSetConditionQueryWmi, ByIdSetConditionRegistry, ByIdSetConditionOperatingSystem
Aliases: Id, TaskSequencePackageId

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceName

Ange namnet på aktivitetssekvensen som ska vara mål för ändringar.

Type: String
Parameter Sets: ByName, ByNameSetConditionIfStatement, ByNameSetConditionVariable, ByNameSetConditionFile, ByNameSetConditionFolder, ByNameSetConditionSoftware, ByNameSetConditionQueryWmi, ByNameSetConditionRegistry, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ValueType

Ange typen av värde för ett registervillkor.

Type: RegistryValueType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: RegistrySZ, RegistryExpandSZ, RegistryDWord

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VersionOperator

Ange en operator som ska användas med ett filvillkor.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Visar vad som skulle hända om cmdleten kördes. Den kör inte cmdleten .

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

Denna cmdlet har stöd för parametrarna -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction och -WarningVariable. Mer information finns i about_CommonParameters.

Dela via