Redigera

Dela via

Configuring Step 4: Configure Application Security

  • Artikel

by Keith Newman and Robert McMurray

In this phase of building your ASP.NET website, you configure the security settings that are available in IIS. The following sections discuss common security settings for ASP.NET applications:

4.1. Isolate Web Applications

Implement the following recommendations to isolate websites and web applications on your server.

  • Use one application pool per website or web application.
  • Limit access to site folders and files to the application pool identity.
  • Set up a separate ASP.NET temp folder per site and only give access to the application pool identity.
  • Make sure to set an ACL (access control list) on each site root to allow only access to the application pool identity.

If you have more than one application per application pool, consider creating enough application pools and moving some of the applications to the new pools.

To create an application pool

  1. Open IIS Manager.
  2. In the Connections pane, click Application Pools.
  3. In the Actions pane, click Add Application Pool.
  4. In the Name box, type a unique name for the application pool.
  5. Select the .NET Framework version and Managed pipeline mode.
  6. Click OK.

To move an application to another application pool

  1. Open IIS Manager.
  2. In the Connections page, select the website or web application you want to move.
  3. In the Actions pane, click Basic Settings.
  4. On the Edit Site dialog, click Select to open the Select Application Pool dialog, and then select the application pool from the Application pool menu.
  5. Click OK to close the Select Application Pool dialog, and click OK to close the Edit Site menu.

To add an application pool identity to a folder or file ACL

  1. Open Windows Explorer and navigate to the folder or file.
  2. Right click the folder or file, and then click Properties.
  3. Select the Security tab, and then click Edit.
  4. Click Add, click Locations, and select your server as the location to search.
  5. In the Enter the object names to select box, type IIS APPPOOL\applicationPoolName, where applicationPoolName is the application pool identity.
  6. Click OK, click OK, and click OK again to close the dialogs.

4.2. .NET Trust Levels

This section describes how to set application trust level by using either IIS Manager UI or the command line.

To set a trust level by using the UI

  1. Open IIS Manager and navigate to the level you want to manage.
  2. In Features View, double-click .NET Trust Levels.
  3. On the .NET Trust Levels page, select a trust level from the Trust level drop-down list, and then click Apply in the Actions pane.

To set a trust level by using the command line

To set a trust level, use the following syntax:

appcmd set config /commit:WEBROOT /section:trust /level:Full|High|Medium|Low|Minimal

The level attribute uses one of five values that correspond to preconfigured CAS policy files. For example, to set a trust level of Full, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:trust /level:Full

Note

When you use Appcmd.exe to configure the trust element at the global level in IIS 8, specify /commit:WEBROOT in the command so that configuration changes are made to the root Web.config file instead of ApplicationHost.config.

4.3. .NET Authentication

In Plan an ASP.NET Website on IIS, you made design decisions about what authentication mode was right for your application.

ASP.NET Forms Authentication

This section describes how to configure ASP.NET forms authentication by using either the IIS Manager UI or the command line.

To configure forms authentication by using the UI

  1. Open IIS Manager and navigate to the level you want to manage.
  2. In Features View, double-click Authentication.
  3. On the Authentication page, select Forms Authentication.
  4. In the Actions pane, click Enable to use Forms authentication with the default settings.
  5. In the Actions pane, click Edit.
  6. In the Edit Forms Authentication Settings dialog box, in the Login URL text box, type the name of the page where clients log in.
  7. In the Authentication cookie time-out (in minutes) text box, type the number of minutes you want to use for the time-out value.
  8. From the Mode list, select the cookie mode you want to use.
  9. In the Name text box, type the name of the cookie.
  10. From the Protection mode list, select the protection mode you want to use.
  11. Select the Requires SSL check box.
  12. Select the Extend cookie expiration on every request check box, and then click OK.

To configure forms authentication by using the command line

To enable forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /mode:None|Windows|Passport|Forms

By default, IIS 8 sets the mode attribute to Windows, which disables Forms authentication. If you set the attribute to Forms, you enable Forms authentication. For example, to enable Forms authentication, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /mode:Forms

Note

When you use Appcmd.exe to configure the authentication element at the global level in IIS 8, specify /commit:WEBROOT in the command so that configuration changes are made to the root Web.config file instead of ApplicationHost.config.

To specify the login URL for Forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.loginURL:string

The variable forms.loginURL:string is the name of the page where clients login. The default value is Login.aspx. For example, to specify the login URL for Forms authentication, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.loginURL:login.aspx

Note

When you use Appcmd.exe to configure the authentication element at the global level in IIS 8, specify /commit:WEBROOT in the command so that configuration changes are made to the root Web.config file instead of ApplicationHost.config.

To specify the authentication time-out for Forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.timeout:TimeSpan

The variable forms.timeout:TimeSpan is the time in minutes when the cookie used for authentication expires. The default value is 30 minutes. For example, to specify the authentication time-out for Forms authentication, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.timeout:30

Note

When you use Appcmd.exe to configure the authentication element at the global level in IIS 8, you must specify /commit:WEBROOT in the command so that configuration changes are made to the root Web.config file instead of ApplicationHost.config.

To configure the cookie name for Forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.name:string

The variable forms.name:string is the name of the cookie used for Forms authentication. The default value is .ASPXAUTH. For example, to configure the cookie name for Forms authentication, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.name:.ASPXUTH

To configure the cookie mode for Forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.cookieless:UseUri|UseCookies|AutoDetect|UseDeviceProfile

The default value for forms.cookieless is UseDeviceProfile. For example, to configure the cookie mode for Forms authentication to use the setting Use Device Profile, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.cookieless:UseDeviceProfile

To configure the cookie protection mode for Forms authentication, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.protection:All|None|Encryption|Validation

The default value for forms.protection is All. For example, to configure the cookie protection mode for Forms authentication to use the setting Encryption and Validation, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.protection:All

To require SSL for an authentication cookie, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.requireSSL:true|false

The default value for forms.requireSSL is false. If you set this attribute to true, you require SSL. For example, to require SSL for an authentication cookie, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.requireSSL:true

To cache frequently requested content, use the following syntax:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.slidingExpiration:true|false

The default value for forms.slidingExpiration is true. For example, to cache frequently requested content, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:system.web/authentication /forms.slidingExpiration:true

ASP.NET Impersonation Authentication

To configure Impersonation Authentication by using the UI

  1. Open IIS Manager and navigate to the level you want to manage.
  2. In Features View, double-click Authentication.
  3. On the Authentication page, select ASP.NET Impersonation.
  4. In the Actions pane, click Enable to use ASP.NET Impersonation authentication with the default settings.
  5. Optionally, in the Actions pane, click Edit to set the security principal.
  6. In the Edit ASP.NET Impersonation Settings dialog box, select either Specific user or Authenticated user. Whichever you decide, IIS uses this identity for the security context of the ASP.NET application. By default, IIS 8 is set to impersonate the authenticated user.
  7. Click OK to finish or proceed to the next optional steps to change the identity to impersonate.
  8. Optionally, click Set to change the Specific user identity.
  9. In the Set Credentials dialog box, enter the name of an existing user account in User name, the password associated with that user account in Password, and then the exact same value in Confirm password for a new account IIS should use for anonymous access.
  10. Click OK to close the Set Credentials dialog box.
  11. Click OK to close the Edit ASP.NET Impersonation Settings dialog box.

To configure Impersonation Authentication by using the command line

To enable or disable ASP.NET Impersonation, use the following syntax:

appcmd set config /commit:WEBROOT /section:identity /impersonate:true|false

By default, IIS sets the impersonate attribute to false, which disables ASP.NET Impersonation authentication. If you set the attribute to true, you enable ASP.NET Impersonation authentication. For example, to enable ASP.NET Impersonation authentication, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:identity /impersonate:true

Optionally, you can set the account for IIS to impersonate, using the following syntax:

appcmd set config /commit:WEBROOT /section:identity /userName:string /password:string

The variable userName:string is the account IIS uses to impersonate and the variable password:string is the password. For example, to use an account named Moe for IIS to impersonate, type the following at the command prompt, and then press ENTER:

appcmd set config /commit:WEBROOT /section:identity /userName: Moe /password:pass@word1

Note

When you use Appcmd.exe to configure the identity element at the global level in IIS 8, specify /commit:WEBROOT in the command so that configuration changes are made to the root Web.config file instead of ApplicationHost.config.

4.4. Machine Key Settings

This section describes how to generate machine keys for your ASP.NET application by using the IIS Manager UI.

To generate machine keys by using the UI

  1. Open IIS Manager and navigate to the level you want to manage.
  2. In Features View, double-click Machine Key.
  3. On the Machine Key page, select a validation method from the Validation method list. The default validation method is SHA1.
  4. Choose an encryption method from the Encryption method list. The default encryption method is Auto.
  5. Optionally, configure settings for validation and decryption keys.
  6. In the Actions pane, click Generate Keys, and then click Apply.

4.5. TLS/SSL Communication

This section describes how to configure TLS/SSL security for your application.

After obtaining a server certificate from a certification authority (CA), work through the procedures in the following sections:

  1. SSL Binding
  2. Require SSL for Your Site
  3. Client Certificates

SSL Binding

This section describes how to add an SSL binding to your site by using either the IIS Manager UI or the command line.

To add an SSL binding to a site by using the UI

  1. Open IIS Manager.
  2. In the Connections pane, expand the Sites node in the tree, and then click to select the site for which you want to add a binding.
  3. In the Actions pane, click Bindings.
  4. In the Site Bindings dialog box, click Add.
  5. In the Add Site Binding dialog box, in the Type list, select https.
  6. From the IP address list, select All Unassigned (unless there is a specific IP address you want to use).
  7. In the Port box, type the number of the port (the default is 443).
  8. In the Host name box, type the name of the host computer.
  9. If you want multiple secure websites to be served using the same IP address, select the Require Server Name Indication check box.
  10. From the SSL certificate list, select the certificate for your website. If your certificate doesn't appear in the list, click Select and search for the certificate using the Select Certificate dialog box.
  11. Click OK.

To add an SSL binding to a site by using the command line

To add a binding to a site, use the following syntax:

appcmd set site /site.name:string /+bindings.[protocol='string', bindingInformation='string']

The variable site.name:string is name of the site to which you want to add a binding. The variable protocol='string' is the protocol that you want to use, and the variable bindingInformation='string' is the combination of IP address, port, and host header.

For example, to configure a site named contoso to have an HTTPS binding for all IP addresses, on port 443, without a host header, type the following at the command prompt, and then press ENTER:

appcmd set site /site.name:contoso /+bindings.[protocol='https', bindingInformation='*:443:']

Require SSL for Your Site

This section describes how to require SSL for your website by using the IIS Manager UI or the command line.

To require SSL using the UI

  1. Open IIS Manager and navigate to the level you want to manage. Make sure that you are at the site, application, or directory level; SSL Settings are not available at the server level.

    Note

    If you want to configure SSL at the file level, navigate to the file in Content View and then click Switch to Features View in the Actions pane.

  2. In Features View, double-click SSL Settings.

  3. On the SSL Settings page, select Require SSL.

  4. In the Actions pane, click Apply.

To require SSL using the command line

To require SSL, use the following syntax:

appcmd set config "site|URL" /section:access /sslFlags:Ssl /commit:APPHOST

The variable site|URL is the site, application, virtual directory, or file where you want IIS 8 to require SSL. For example, to require SSL for the Default Web Site, type the following at the command prompt, and then press ENTER:

appcmd set config "Default Web Site" /section:access /sslFlags:Ssl /commit:APPHOST

To require SSL for the file iisstart.htm on the Default Web Site, type the following at the command prompt, and then press ENTER:

appcmd set config "http://localhost/iisstart.htm" /section:access /sslFlags:Ssl /commit:APPHOST

Client Certificates

To specify client certificates by using the UI

  1. Open IIS Manager and navigate to the level you want to manage. Make sure that you are at the site, application, or directory level; SSL Settings are not available at the server level.

    Note

    If you want to configure SSL at the file level, navigate to the file in Content View and then click Switch to Features View in the Actions pane.

  2. In Features View, double-click SSL Settings.

  3. On the SSL Settings page, optionally select Require SSL. You do not need SSL to Ignore or Accept client certificates.

  4. On the SSL Settings page, in the Client certificates area, use one of the following procedures:

    • Select Ignore if you do not want to accept a client certificate even if a client presents one.
    • Select Accept to accept client certificates.
    • Select Require to require client certificates. To use Require Client Certificates, you must enable Require SSL.

  5. In the Actions pane, click Apply.

To specify client certificates by using the command line

To specify whether to use client certificates, use the following syntax:

appcmd set config "site|URL" /section:access /sslFlags:Ssl|SslNegotiateCert|SslRequireCert /commit:APPHOST

The variable site|URL is the site, application, virtual directory, or file where you want IIS to enable client certificates. For example, to accept client certificates for the Default Web Site, type the following at the command prompt, and then press ENTER:

appcmd set config "Default Web Site" /section:access /sslFlags:SslNegotiateCert /commit:APPHOST

To accept client certificates for the file iisstart.htm on the Default Web Site, type the following at the command prompt, and then press ENTER:

appcmd set config "http://localhost/iisstart.htm" /section:access /sslFlags:SslNegotiateCert /commit:APPHOST

You can specify one or more of the values for the sslFlags attribute. If you want more than one value, separate each value with a comma (,). For example, to specify a requirement for both SSL and client certificates on the Default Web Site, type the following at the command prompt, and then press ENTER:

appcmd set config "Default Web Site" /section:access /sslFlags:Ssl,SslRequireCert /commit:APPHOST