Så här gör du: Använda dataskydd
Kommentar
Den här artikeln gäller för Windows.
Information om ASP.NET Core finns i ASP.NET Core Data Protection.
.NET ger åtkomst till dataskydds-API:et (DPAPI), vilket gör att du kan kryptera data med hjälp av information från det aktuella användarkontot eller datorn. När du använder DPAPI kan du lindra det svåra problemet med att explicit generera och lagra en kryptografisk nyckel.
ProtectedData Använd klassen för att kryptera en kopia av en matris med byte. Du kan ange att data som krypteras av det aktuella användarkontot endast kan dekrypteras av samma användarkonto, eller så kan du ange att data som krypteras av det aktuella användarkontot kan dekrypteras av alla konton på datorn. DataProtectionScope Se uppräkningen för en detaljerad beskrivning av ProtectedData alternativ.
Kryptera data till en fil eller dataström med dataskydd
Skapa slumpmässig entropi.
Anropa den statiska Protect metoden när du skickar en matris med byte för att kryptera, entropi och dataskyddsomfånget.
Skriv krypterade data till en fil eller dataström.
Så här dekrypterar du data från en fil eller dataström med dataskydd
Läs krypterade data från en fil eller dataström.
Anropa den statiska Unprotect metoden när du skickar en matris med byte för att dekryptera och dataskyddsomfånget.
Exempel
I följande kodexempel visas två former av kryptering och dekryptering. Först krypterar och dekrypterar kodexemplet en minnesintern matris med byte. Därefter krypterar kodexemplet en kopia av en bytematris, sparar den i en fil, läser in data från filen och dekrypterar sedan data. Exemplet visar ursprungliga data, krypterade data och de dekrypterade data.
using System;
using System.IO;
using System.Text;
using System.Security.Cryptography;
public class MemoryProtectionSample
{
public static void Main() => Run();
public static void Run()
{
try
{
///////////////////////////////
//
// Memory Encryption - ProtectedMemory
//
///////////////////////////////
// Create the original data to be encrypted (The data length should be a multiple of 16).
byte[] toEncrypt = UnicodeEncoding.ASCII.GetBytes("ThisIsSomeData16");
Console.WriteLine($"Original data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
Console.WriteLine("Encrypting...");
// Encrypt the data in memory.
EncryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon);
Console.WriteLine($"Encrypted data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
Console.WriteLine("Decrypting...");
// Decrypt the data in memory.
DecryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon);
Console.WriteLine($"Decrypted data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
///////////////////////////////
//
// Data Encryption - ProtectedData
//
///////////////////////////////
// Create the original data to be encrypted
toEncrypt = UnicodeEncoding.ASCII.GetBytes("This is some data of any length.");
// Create a file.
FileStream fStream = new FileStream("Data.dat", FileMode.OpenOrCreate);
// Create some random entropy.
byte[] entropy = CreateRandomEntropy();
Console.WriteLine();
Console.WriteLine($"Original data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
Console.WriteLine("Encrypting and writing to disk...");
// Encrypt a copy of the data to the stream.
int bytesWritten = EncryptDataToStream(toEncrypt, entropy, DataProtectionScope.CurrentUser, fStream);
fStream.Close();
Console.WriteLine("Reading data from disk and decrypting...");
// Open the file.
fStream = new FileStream("Data.dat", FileMode.Open);
// Read from the stream and decrypt the data.
byte[] decryptData = DecryptDataFromStream(entropy, DataProtectionScope.CurrentUser, fStream, bytesWritten);
fStream.Close();
Console.WriteLine($"Decrypted data: {UnicodeEncoding.ASCII.GetString(decryptData)}");
}
catch (Exception e)
{
Console.WriteLine($"ERROR: {e.Message}");
}
}
public static void EncryptInMemoryData(byte[] Buffer, MemoryProtectionScope Scope )
{
if (Buffer == null)
throw new ArgumentNullException(nameof(Buffer));
if (Buffer.Length <= 0)
throw new ArgumentException("The buffer length was 0.", nameof(Buffer));
// Encrypt the data in memory. The result is stored in the same array as the original data.
ProtectedMemory.Protect(Buffer, Scope);
}
public static void DecryptInMemoryData(byte[] Buffer, MemoryProtectionScope Scope)
{
if (Buffer == null)
throw new ArgumentNullException(nameof(Buffer));
if (Buffer.Length <= 0)
throw new ArgumentException("The buffer length was 0.", nameof(Buffer));
// Decrypt the data in memory. The result is stored in the same array as the original data.
ProtectedMemory.Unprotect(Buffer, Scope);
}
public static byte[] CreateRandomEntropy()
{
// Create a byte array to hold the random value.
byte[] entropy = new byte[16];
// Create a new instance of the RNGCryptoServiceProvider.
// Fill the array with a random value.
new RNGCryptoServiceProvider().GetBytes(entropy);
// Return the array.
return entropy;
}
public static int EncryptDataToStream(byte[] Buffer, byte[] Entropy, DataProtectionScope Scope, Stream S)
{
if (Buffer == null)
throw new ArgumentNullException(nameof(Buffer));
if (Buffer.Length <= 0)
throw new ArgumentException("The buffer length was 0.", nameof(Buffer));
if (Entropy == null)
throw new ArgumentNullException(nameof(Entropy));
if (Entropy.Length <= 0)
throw new ArgumentException("The entropy length was 0.", nameof(Entropy));
if (S == null)
throw new ArgumentNullException(nameof(S));
int length = 0;
// Encrypt the data and store the result in a new byte array. The original data remains unchanged.
byte[] encryptedData = ProtectedData.Protect(Buffer, Entropy, Scope);
// Write the encrypted data to a stream.
if (S.CanWrite && encryptedData != null)
{
S.Write(encryptedData, 0, encryptedData.Length);
length = encryptedData.Length;
}
// Return the length that was written to the stream.
return length;
}
public static byte[] DecryptDataFromStream(byte[] Entropy, DataProtectionScope Scope, Stream S, int Length)
{
if (S == null)
throw new ArgumentNullException(nameof(S));
if (Length <= 0 )
throw new ArgumentException("The given length was 0.", nameof(Length));
if (Entropy == null)
throw new ArgumentNullException(nameof(Entropy));
if (Entropy.Length <= 0)
throw new ArgumentException("The entropy length was 0.", nameof(Entropy));
byte[] inBuffer = new byte[Length];
byte[] outBuffer;
// Read the encrypted data from a stream.
if (S.CanRead)
{
S.Read(inBuffer, 0, Length);
outBuffer = ProtectedData.Unprotect(inBuffer, Entropy, Scope);
}
else
{
throw new IOException("Could not read the stream.");
}
// Return the decrypted data
return outBuffer;
}
}
Imports System.IO
Imports System.Text
Imports System.Security.Cryptography
Public Module MemoryProtectionSample
Sub Main()
Run()
End Sub
Sub Run()
Try
''''''''''''''''''''''''''''''''''''
'
' Memory Encryption - ProtectedMemory
'
''''''''''''''''''''''''''''''''''''
' Create the original data to be encrypted (The data length should be a multiple of 16).
Dim toEncrypt As Byte() = UnicodeEncoding.ASCII.GetBytes("ThisIsSomeData16")
Console.WriteLine("Original data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
Console.WriteLine("Encrypting...")
' Encrypt the data in memory.
EncryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon)
Console.WriteLine("Encrypted data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
Console.WriteLine("Decrypting...")
' Decrypt the data in memory.
DecryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon)
Console.WriteLine("Decrypted data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
''''''''''''''''''''''''''''''''''''
'
' Data Encryption - ProtectedData
'
''''''''''''''''''''''''''''''''''''
' Create the original data to be encrypted
toEncrypt = UnicodeEncoding.ASCII.GetBytes("This is some data of any length.")
' Create a file.
Dim fStream As New FileStream("Data.dat", FileMode.OpenOrCreate)
' Create some random entropy.
Dim entropy As Byte() = CreateRandomEntropy()
Console.WriteLine()
Console.WriteLine("Original data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
Console.WriteLine("Encrypting and writing to disk...")
' Encrypt a copy of the data to the stream.
Dim bytesWritten As Integer = EncryptDataToStream(toEncrypt, entropy, DataProtectionScope.CurrentUser, fStream)
fStream.Close()
Console.WriteLine("Reading data from disk and decrypting...")
' Open the file.
fStream = New FileStream("Data.dat", FileMode.Open)
' Read from the stream and decrypt the data.
Dim decryptData As Byte() = DecryptDataFromStream(entropy, DataProtectionScope.CurrentUser, fStream, bytesWritten)
fStream.Close()
Console.WriteLine("Decrypted data: " + UnicodeEncoding.ASCII.GetString(decryptData))
Catch e As Exception
Console.WriteLine("ERROR: " + e.Message)
End Try
End Sub
Sub EncryptInMemoryData(ByVal Buffer() As Byte, ByVal Scope As MemoryProtectionScope)
If Buffer Is Nothing Then
Throw New ArgumentNullException("Buffer")
End If
If Buffer.Length <= 0 Then
Throw New ArgumentException("Buffer")
End If
' Encrypt the data in memory. The result is stored in the same array as the original data.
ProtectedMemory.Protect(Buffer, Scope)
End Sub
Sub DecryptInMemoryData(ByVal Buffer() As Byte, ByVal Scope As MemoryProtectionScope)
If Buffer Is Nothing Then
Throw New ArgumentNullException("Buffer")
End If
If Buffer.Length <= 0 Then
Throw New ArgumentException("Buffer")
End If
' Decrypt the data in memory. The result is stored in the same array as the original data.
ProtectedMemory.Unprotect(Buffer, Scope)
End Sub
Function CreateRandomEntropy() As Byte()
' Create a byte array to hold the random value.
Dim entropy(15) As Byte
' Create a new instance of the RNGCryptoServiceProvider.
' Fill the array with a random value.
Dim RNG As New RNGCryptoServiceProvider()
RNG.GetBytes(entropy)
' Return the array.
Return entropy
End Function 'CreateRandomEntropy
Function EncryptDataToStream(ByVal Buffer() As Byte, ByVal Entropy() As Byte, ByVal Scope As DataProtectionScope, ByVal S As Stream) As Integer
If Buffer Is Nothing Then
Throw New ArgumentNullException("Buffer")
End If
If Buffer.Length <= 0 Then
Throw New ArgumentException("Buffer")
End If
If Entropy Is Nothing Then
Throw New ArgumentNullException("Entropy")
End If
If Entropy.Length <= 0 Then
Throw New ArgumentException("Entropy")
End If
If S Is Nothing Then
Throw New ArgumentNullException("S")
End If
Dim length As Integer = 0
' Encrypt the data and store the result in a new byte array. The original data remains unchanged.
Dim encryptedData As Byte() = ProtectedData.Protect(Buffer, Entropy, Scope)
' Write the encrypted data to a stream.
If S.CanWrite AndAlso Not (encryptedData Is Nothing) Then
S.Write(encryptedData, 0, encryptedData.Length)
length = encryptedData.Length
End If
' Return the length that was written to the stream.
Return length
End Function 'EncryptDataToStream
Function DecryptDataFromStream(ByVal Entropy() As Byte, ByVal Scope As DataProtectionScope, ByVal S As Stream, ByVal Length As Integer) As Byte()
If S Is Nothing Then
Throw New ArgumentNullException("S")
End If
If Length <= 0 Then
Throw New ArgumentException("Length")
End If
If Entropy Is Nothing Then
Throw New ArgumentNullException("Entropy")
End If
If Entropy.Length <= 0 Then
Throw New ArgumentException("Entropy")
End If
Dim inBuffer(Length - 1) As Byte
Dim outBuffer() As Byte
' Read the encrypted data from a stream.
If S.CanRead Then
S.Read(inBuffer, 0, Length)
outBuffer = ProtectedData.Unprotect(inBuffer, Entropy, Scope)
Else
Throw New IOException("Could not read the stream.")
End If
' Return the unencrypted data as byte array.
Return outBuffer
End Function 'DecryptDataFromStream
End Module 'MemoryProtectionSample
Kompilera koden
Det här exemplet kompilerar och körs endast när du riktar in dig på .NET Framework och körs i Windows.
Inkludera en referens till
System.Security.dll.SystemInkludera namnområdet , System.IO, System.Security.Cryptographyoch System.Text .
Se även
Samarbeta med oss på GitHub
Källan för det här innehållet finns på GitHub, där du även kan skapa och granska ärenden och pull-begäranden. Se vår deltagarguide för mer information.
