Implementera språkidentifiering

Språkidentifiering används för att identifiera språk som talas i ljud jämfört med en lista över språk som stöds.

Användningsfall för språkidentifiering (LID) omfattar:

• Tal till text-igenkänning när du behöver identifiera språket i en ljudkälla och sedan transkribera det till text.
• Talöversättning när du behöver identifiera språket i en ljudkälla och sedan översätta det till ett annat språk.

För taligenkänning är den inledande svarstiden högre med språkidentifiering. Du bör bara inkludera den här valfria funktionen efter behov.

Ange konfigurationsalternativ

Oavsett om du använder språkidentifiering med tal till text eller med talöversättning finns det några vanliga begrepp och konfigurationsalternativ.

• Definiera en lista över kandidatspråk som du förväntar dig i ljudet.
• Bestäm om du vill använda språkidentifiering i början eller kontinuerligt .

Sedan gör du en begäran om identifiering en gång eller kontinuerlig igenkänning till Speech-tjänsten.

Den här artikeln innehåller kodfragment för att beskriva begreppen. Länkar till fullständiga exempel för varje användningsfall finns.

Kandidatspråk

Du tillhandahåller kandidatspråk med objektet AutoDetectSourceLanguageConfig . Du förväntar dig att minst en av kandidaterna är i ljudet. Du kan inkludera upp till fyra språk för start-LID eller upp till 10 språk för kontinuerlig LID. Speech-tjänsten returnerar ett av de kandidatspråk som tillhandahålls även om dessa språk inte fanns i ljudet. Om till exempel fr-FR (franska) och en-US (engelska) tillhandahålls som kandidater, men tyska talas, returnerar tjänsten antingen fr-FR eller en-US.

Du måste ange den fullständiga språkvarianten med bindestreck (-) avgränsare, men språkidentifiering använder bara ett språk per basspråk. Ta inte med flera nationella inställningar för samma språk, till exempel en-US och en-GB.

var autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.FromLanguages(new string[] { "en-US", "de-DE", "zh-CN" });

auto autoDetectSourceLanguageConfig = 
    AutoDetectSourceLanguageConfig::FromLanguages({ "en-US", "de-DE", "zh-CN" });

auto_detect_source_language_config = \
    speechsdk.languageconfig.AutoDetectSourceLanguageConfig(languages=["en-US", "de-DE", "zh-CN"])

AutoDetectSourceLanguageConfig autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.fromLanguages(Arrays.asList("en-US", "de-DE", "zh-CN"));

var autoDetectSourceLanguageConfig = SpeechSDK.AutoDetectSourceLanguageConfig.fromLanguages([("en-US", "de-DE", "zh-CN"]);

NSArray *languages = @[@"en-US", @"de-DE", @"zh-CN"];
SPXAutoDetectSourceLanguageConfiguration* autoDetectSourceLanguageConfig = \
    [[SPXAutoDetectSourceLanguageConfiguration alloc]init:languages];

Mer information finns i språk som stöds.

Språkidentifiering vid start och kontinuerlig språkidentifiering

Speech stöder både start- och kontinuerlig språkidentifiering (LID).

Kommentar

Kontinuerlig språkidentifiering stöds endast med Speech SDK:er i C#, C++, Java (endast för tal till text), JavaScript (endast för tal till text) och Python.

• Start-LID identifierar språket en gång inom de första sekunderna av ljudet. Använd start-LID om språket i ljudet inte ändras. Med start-LID identifieras ett enda språk och returneras på mindre än 5 sekunder.
• Kontinuerlig LID kan identifiera flera språk under ljudet. Använd kontinuerlig LID om språket i ljudet kan ändras. Kontinuerlig LID har inte stöd för att ändra språk inom samma mening. Om du till exempel främst talar spanska och infogar vissa engelska ord identifieras inte språkändringen per ord.

Du implementerar start-LID eller kontinuerlig LID genom att anropa metoder för att identifiera en gång eller kontinuerligt. Kontinuerlig LID stöds endast med kontinuerlig igenkänning.

Identifiera en gång eller kontinuerligt

Språkidentifiering slutförs med igenkänningsobjekt och åtgärder. Skicka en begäran till Speech-tjänsten om igenkänning av ljud.

Kommentar

Blanda inte ihop igenkänning med identifiering. Igenkänning kan användas med eller utan språkidentifiering.

Anropa antingen metoden "identifiera en gång" eller starta och stoppa metoder för kontinuerlig igenkänning. Du väljer mellan:

• Identifiera en gång med Start-LID. Kontinuerlig LID stöds inte för att identifiera en gång.
• Använd kontinuerlig igenkänning med start-LID.
• Använd kontinuerlig igenkänning med kontinuerlig LID.

Egenskapen SpeechServiceConnection_LanguageIdMode krävs endast för kontinuerlig LID. Utan den är Speech-tjänsten som standard start-LID. De värden som stöds gäller AtStart för start-LID eller Continuous kontinuerlig LID.

// Recognize once with At-start LID. Continuous LID isn't supported for recognize once.
var result = await recognizer.RecognizeOnceAsync();

// Start and stop continuous recognition with At-start LID
await recognizer.StartContinuousRecognitionAsync();
await recognizer.StopContinuousRecognitionAsync();

// Start and stop continuous recognition with Continuous LID
speechConfig.SetProperty(PropertyId.SpeechServiceConnection_LanguageIdMode, "Continuous");
await recognizer.StartContinuousRecognitionAsync();
await recognizer.StopContinuousRecognitionAsync();

// Recognize once with At-start LID. Continuous LID isn't supported for recognize once.
auto result = recognizer->RecognizeOnceAsync().get();

// Start and stop continuous recognition with At-start LID
recognizer->StartContinuousRecognitionAsync().get();
recognizer->StopContinuousRecognitionAsync().get();

// Start and stop continuous recognition with Continuous LID
speechConfig->SetProperty(PropertyId::SpeechServiceConnection_LanguageIdMode, "Continuous");
recognizer->StartContinuousRecognitionAsync().get();
recognizer->StopContinuousRecognitionAsync().get();

// Recognize once with At-start LID. Continuous LID isn't supported for recognize once.
SpeechRecognitionResult  result = recognizer->RecognizeOnceAsync().get();

// Start and stop continuous recognition with At-start LID
recognizer.startContinuousRecognitionAsync().get();
recognizer.stopContinuousRecognitionAsync().get();

// Start and stop continuous recognition with Continuous LID
speechConfig.setProperty(PropertyId.SpeechServiceConnection_LanguageIdMode, "Continuous");
recognizer.startContinuousRecognitionAsync().get();
recognizer.stopContinuousRecognitionAsync().get();

# Recognize once with At-start LID. Continuous LID isn't supported for recognize once.
result = recognizer.recognize_once()

# Start and stop continuous recognition with At-start LID
recognizer.start_continuous_recognition()
recognizer.stop_continuous_recognition()

# Start and stop continuous recognition with Continuous LID
speech_config.set_property(property_id=speechsdk.PropertyId.SpeechServiceConnection_LanguageIdMode, value='Continuous')
recognizer.start_continuous_recognition()
recognizer.stop_continuous_recognition()

Använda tal till text

Du använder Tal till textigenkänning när du behöver identifiera språket i en ljudkälla och sedan transkribera det till text. Mer information finns i Översikt över tal till text.

Kommentar

Tal till text-igenkänning med språkidentifiering vid start stöds med Speech SDK:er i C#, C++, Python, Java, JavaScript och Objective-C. Tal till text-igenkänning med kontinuerlig språkidentifiering stöds endast med Speech SDK:er i C#, C++, Java, JavaScript och Python.

För tal till text-igenkänning med kontinuerlig språkidentifiering måste du skapa en SpeechConfig från slutpunktssträngen wss://{region}.stt.speech.microsoft.com/speech/universal/v2 , som visas i kodexempel. I en framtida SDK-version behöver du inte ange den.

Se fler exempel på tal till textigenkänning med språkidentifiering på GitHub.

Identifiera en gång

using Microsoft.CognitiveServices.Speech;
using Microsoft.CognitiveServices.Speech.Audio;

var speechConfig = SpeechConfig.FromSubscription("YourSubscriptionKey","YourServiceRegion");

var autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.FromLanguages(
        new string[] { "en-US", "de-DE", "zh-CN" });

using var audioConfig = AudioConfig.FromDefaultMicrophoneInput();
using (var recognizer = new SpeechRecognizer(
    speechConfig,
    autoDetectSourceLanguageConfig,
    audioConfig))
{
    var speechRecognitionResult = await recognizer.RecognizeOnceAsync();
    var autoDetectSourceLanguageResult =
        AutoDetectSourceLanguageResult.FromResult(speechRecognitionResult);
    var detectedLanguage = autoDetectSourceLanguageResult.Language;
}

Kontinuerlig igenkänning

using Microsoft.CognitiveServices.Speech;
using Microsoft.CognitiveServices.Speech.Audio;

var region = "YourServiceRegion";
// Currently the v2 endpoint is required. In a future SDK release you won't need to set it.
var endpointString = $"wss://{region}.stt.speech.microsoft.com/speech/universal/v2";
var endpointUrl = new Uri(endpointString);

var config = SpeechConfig.FromEndpoint(endpointUrl, "YourSubscriptionKey");

// Set the LanguageIdMode (Optional; Either Continuous or AtStart are accepted; Default AtStart)
config.SetProperty(PropertyId.SpeechServiceConnection_LanguageIdMode, "Continuous");

var autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig.FromLanguages(new string[] { "en-US", "de-DE", "zh-CN" });

var stopRecognition = new TaskCompletionSource<int>();
using (var audioInput = AudioConfig.FromWavFileInput(@"en-us_zh-cn.wav"))
{
    using (var recognizer = new SpeechRecognizer(config, autoDetectSourceLanguageConfig, audioInput))
    {
        // Subscribes to events.
        recognizer.Recognizing += (s, e) =>
        {
            if (e.Result.Reason == ResultReason.RecognizingSpeech)
            {
                Console.WriteLine($"RECOGNIZING: Text={e.Result.Text}");
                var autoDetectSourceLanguageResult = AutoDetectSourceLanguageResult.FromResult(e.Result);
                Console.WriteLine($"DETECTED: Language={autoDetectSourceLanguageResult.Language}");
            }
        };

        recognizer.Recognized += (s, e) =>
        {
            if (e.Result.Reason == ResultReason.RecognizedSpeech)
            {
                Console.WriteLine($"RECOGNIZED: Text={e.Result.Text}");
                var autoDetectSourceLanguageResult = AutoDetectSourceLanguageResult.FromResult(e.Result);
                Console.WriteLine($"DETECTED: Language={autoDetectSourceLanguageResult.Language}");
            }
            else if (e.Result.Reason == ResultReason.NoMatch)
            {
                Console.WriteLine($"NOMATCH: Speech could not be recognized.");
            }
        };

        recognizer.Canceled += (s, e) =>
        {
            Console.WriteLine($"CANCELED: Reason={e.Reason}");

            if (e.Reason == CancellationReason.Error)
            {
                Console.WriteLine($"CANCELED: ErrorCode={e.ErrorCode}");
                Console.WriteLine($"CANCELED: ErrorDetails={e.ErrorDetails}");
                Console.WriteLine($"CANCELED: Did you set the speech resource key and region values?");
            }

            stopRecognition.TrySetResult(0);
        };

        recognizer.SessionStarted += (s, e) =>
        {
            Console.WriteLine("\n    Session started event.");
        };

        recognizer.SessionStopped += (s, e) =>
        {
            Console.WriteLine("\n    Session stopped event.");
            Console.WriteLine("\nStop recognition.");
            stopRecognition.TrySetResult(0);
        };

        // Starts continuous recognition. Uses StopContinuousRecognitionAsync() to stop recognition.
        await recognizer.StartContinuousRecognitionAsync().ConfigureAwait(false);

        // Waits for completion.
        // Use Task.WaitAny to keep the task rooted.
        Task.WaitAny(new[] { stopRecognition.Task });

        // Stops recognition.
        await recognizer.StopContinuousRecognitionAsync().ConfigureAwait(false);
    }
}

Se fler exempel på tal till textigenkänning med språkidentifiering på GitHub.

Identifiera en gång

using namespace std;
using namespace Microsoft::CognitiveServices::Speech;
using namespace Microsoft::CognitiveServices::Speech::Audio;

auto speechConfig = SpeechConfig::FromSubscription("YourSubscriptionKey","YourServiceRegion");

auto autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig::FromLanguages({ "en-US", "de-DE", "zh-CN" });

auto recognizer = SpeechRecognizer::FromConfig(
    speechConfig,
    autoDetectSourceLanguageConfig
    );

speechRecognitionResult = recognizer->RecognizeOnceAsync().get();
auto autoDetectSourceLanguageResult =
    AutoDetectSourceLanguageResult::FromResult(speechRecognitionResult);
auto detectedLanguage = autoDetectSourceLanguageResult->Language;

Kontinuerlig igenkänning

// Creates an instance of a speech config with specified subscription key and service region.
// Note: For multi-lingual speech recognition with language id, it only works with speech v2 endpoint,
// you must use FromEndpoint api in order to use the speech v2 endpoint.

// Replace YourServiceRegion with your region, for example "westus", and
// replace YourSubscriptionKey with your own speech key.
string speechv2Endpoint = "wss://YourServiceRegion.stt.speech.microsoft.com/speech/universal/v2";
auto speechConfig = SpeechConfig::FromEndpoint(speechv2Endpoint, "YourSubscriptionKey");

// Set the mode of input language detection to either "AtStart" (the default) or "Continuous".
// Please refer to the documentation of Language ID for more information.
// https://aka.ms/speech/lid?pivots=programming-language-cpp
speechConfig->SetProperty(PropertyId::SpeechServiceConnection_LanguageIdMode, "Continuous");

// Define the set of languages to detect
auto autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig::FromLanguages({ "en-US", "zh-CN" });

// Creates a speech recognizer using file as audio input.
// Replace with your own audio file name.
auto audioInput = AudioConfig::FromWavFileInput("en-us_zh-cn.wav");
auto recognizer = SpeechRecognizer::FromConfig(speechConfig, autoDetectSourceLanguageConfig, audioInput);

// promise for synchronization of recognition end.
promise<void> recognitionEnd;

// Subscribes to events.
recognizer->Recognizing.Connect([](const SpeechRecognitionEventArgs& e)
    {
        auto lidResult = AutoDetectSourceLanguageResult::FromResult(e.Result);
        cout << "Recognizing in " << lidResult->Language << ": Text =" << e.Result->Text << std::endl;
    });

recognizer->Recognized.Connect([](const SpeechRecognitionEventArgs& e)
    {
        if (e.Result->Reason == ResultReason::RecognizedSpeech)
        {
            auto lidResult = AutoDetectSourceLanguageResult::FromResult(e.Result);
            cout << "RECOGNIZED in " << lidResult->Language << ": Text=" << e.Result->Text << "\n"
                << "  Offset=" << e.Result->Offset() << "\n"
                << "  Duration=" << e.Result->Duration() << std::endl;
        }
        else if (e.Result->Reason == ResultReason::NoMatch)
        {
            cout << "NOMATCH: Speech could not be recognized." << std::endl;
        }
    });

recognizer->Canceled.Connect([&recognitionEnd](const SpeechRecognitionCanceledEventArgs& e)
    {
        cout << "CANCELED: Reason=" << (int)e.Reason << std::endl;

        if (e.Reason == CancellationReason::Error)
        {
            cout << "CANCELED: ErrorCode=" << (int)e.ErrorCode << "\n"
                << "CANCELED: ErrorDetails=" << e.ErrorDetails << "\n"
                << "CANCELED: Did you update the subscription info?" << std::endl;

            recognitionEnd.set_value(); // Notify to stop recognition.
        }
    });

recognizer->SessionStopped.Connect([&recognitionEnd](const SessionEventArgs& e)
    {
        cout << "Session stopped.";
        recognitionEnd.set_value(); // Notify to stop recognition.
    });

// Starts continuous recognition. Uses StopContinuousRecognitionAsync() to stop recognition.
recognizer->StartContinuousRecognitionAsync().get();

// Waits for recognition end.
recognitionEnd.get_future().get();

// Stops recognition.
recognizer->StopContinuousRecognitionAsync().get();

Se fler exempel på tal till textigenkänning med språkidentifiering på GitHub.

Identifiera en gång

AutoDetectSourceLanguageConfig autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.fromLanguages(Arrays.asList("en-US", "de-DE"));

SpeechRecognizer recognizer = new SpeechRecognizer(
    speechConfig,
    autoDetectSourceLanguageConfig,
    audioConfig);

Future<SpeechRecognitionResult> future = recognizer.recognizeOnceAsync();
SpeechRecognitionResult result = future.get(30, TimeUnit.SECONDS);
AutoDetectSourceLanguageResult autoDetectSourceLanguageResult =
    AutoDetectSourceLanguageResult.fromResult(result);
String detectedLanguage = autoDetectSourceLanguageResult.getLanguage();

recognizer.close();
speechConfig.close();
autoDetectSourceLanguageConfig.close();
audioConfig.close();
result.close();

Kontinuerlig igenkänning

// Shows how to do continuous speech recognition on a multilingual audio file with continuous language detection. Here, we assume the
// spoken language in the file can alternate between English (US), Spanish (Mexico) and German.
// If specified, speech recognition will use the custom model associated with the detected language.
public static void continuousRecognitionFromFileWithContinuousLanguageDetectionWithCustomModels() throws InterruptedException, ExecutionException, IOException
{
    // Continuous language detection with speech recognition requires the application to set a V2 endpoint URL.
    // Replace the service (Azure) region with your own service region (e.g. "westus").
    String v2EndpointUrl = "wss://" + "YourServiceRegion" + ".stt.speech.microsoft.com/speech/universal/v2";

    // Creates an instance of a speech config with specified endpoint URL and subscription key. Replace with your own subscription key.
    SpeechConfig speechConfig = SpeechConfig.fromEndpoint(URI.create(v2EndpointUrl), "YourSubscriptionKey");

    // Change the default from at-start language detection to continuous language detection, since the spoken language in the audio
    // may change.
    speechConfig.setProperty(PropertyId.SpeechServiceConnection_LanguageIdMode, "Continuous");

    // Define a set of expected spoken languages in the audio, with an optional custom model endpoint ID associated with each.
    // Update the below with your own languages. Please see https://docs.microsoft.com/azure/cognitive-services/speech-service/language-support
    // for all supported languages.
    // Update the below with your own custom model endpoint IDs, or omit it if you want to use the standard model.
    List<SourceLanguageConfig> sourceLanguageConfigs = new ArrayList<SourceLanguageConfig>();
    sourceLanguageConfigs.add(SourceLanguageConfig.fromLanguage("en-US", "YourEnUsCustomModelID"));
    sourceLanguageConfigs.add(SourceLanguageConfig.fromLanguage("es-MX", "YourEsMxCustomModelID"));
    sourceLanguageConfigs.add(SourceLanguageConfig.fromLanguage("de-DE"));

    // Creates an instance of AutoDetectSourceLanguageConfig with the above 3 source language configurations.
    AutoDetectSourceLanguageConfig autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig.fromSourceLanguageConfigs(sourceLanguageConfigs);

    // We provide a WAV file with English and Spanish utterances as an example. Replace with your own multilingual audio file name.
    AudioConfig audioConfig = AudioConfig.fromWavFileInput( "es-mx_en-us.wav");

    // Creates a speech recognizer using file as audio input and the AutoDetectSourceLanguageConfig
    SpeechRecognizer speechRecognizer = new SpeechRecognizer(speechConfig, autoDetectSourceLanguageConfig, audioConfig);

    // Semaphore used to signal the call to stop continuous recognition (following either a session ended or a cancelled event)
    final Semaphore doneSemaphone = new Semaphore(0);

    // Subscribes to events.

    /* Uncomment this to see intermediate recognition results. Since this is verbose and the WAV file is long, it is commented out by default in this sample.
    speechRecognizer.recognizing.addEventListener((s, e) -> {
        AutoDetectSourceLanguageResult autoDetectSourceLanguageResult = AutoDetectSourceLanguageResult.fromResult(e.getResult());
        String language = autoDetectSourceLanguageResult.getLanguage();
        System.out.println(" RECOGNIZING: Text = " + e.getResult().getText());
        System.out.println(" RECOGNIZING: Language = " + language);
    });
    */

    speechRecognizer.recognized.addEventListener((s, e) -> {
        AutoDetectSourceLanguageResult autoDetectSourceLanguageResult = AutoDetectSourceLanguageResult.fromResult(e.getResult());
        String language = autoDetectSourceLanguageResult.getLanguage();
        if (e.getResult().getReason() == ResultReason.RecognizedSpeech) {
            System.out.println(" RECOGNIZED: Text = " + e.getResult().getText());
            System.out.println(" RECOGNIZED: Language = " + language);
        }
        else if (e.getResult().getReason() == ResultReason.NoMatch) {
            if (language == null || language.isEmpty() || language.toLowerCase().equals("unknown")) {
                System.out.println(" NOMATCH: Speech Language could not be detected.");
            }
            else {
                System.out.println(" NOMATCH: Speech could not be recognized.");
            }
        }
    });

    speechRecognizer.canceled.addEventListener((s, e) -> {
        System.out.println(" CANCELED: Reason = " + e.getReason());
        if (e.getReason() == CancellationReason.Error) {
            System.out.println(" CANCELED: ErrorCode = " + e.getErrorCode());
            System.out.println(" CANCELED: ErrorDetails = " + e.getErrorDetails());
            System.out.println(" CANCELED: Did you update the subscription info?");
        }
        doneSemaphone.release();
    });

    speechRecognizer.sessionStarted.addEventListener((s, e) -> {
        System.out.println("\n Session started event.");
    });

    speechRecognizer.sessionStopped.addEventListener((s, e) -> {
        System.out.println("\n Session stopped event.");
        doneSemaphone.release();
    });

    // Starts continuous recognition and wait for processing to end
    System.out.println(" Recognizing from WAV file... please wait");
    speechRecognizer.startContinuousRecognitionAsync().get();
    doneSemaphone.tryAcquire(30, TimeUnit.SECONDS);

    // Stop continuous recognition
    speechRecognizer.stopContinuousRecognitionAsync().get();

    // These objects must be closed in order to dispose underlying native resources
    speechRecognizer.close();
    speechConfig.close();
    audioConfig.close();
    for (SourceLanguageConfig sourceLanguageConfig : sourceLanguageConfigs)
    {
        sourceLanguageConfig.close();
    }
    autoDetectSourceLanguageConfig.close();
}

Se fler exempel på tal till textigenkänning med språkidentifiering på GitHub.

Identifiera en gång

auto_detect_source_language_config = \
        speechsdk.languageconfig.AutoDetectSourceLanguageConfig(languages=["en-US", "de-DE"])
speech_recognizer = speechsdk.SpeechRecognizer(
        speech_config=speech_config, 
        auto_detect_source_language_config=auto_detect_source_language_config, 
        audio_config=audio_config)
result = speech_recognizer.recognize_once()
auto_detect_source_language_result = speechsdk.AutoDetectSourceLanguageResult(result)
detected_language = auto_detect_source_language_result.language

Kontinuerlig igenkänning

import azure.cognitiveservices.speech as speechsdk
import time
import json

speech_key, service_region = "YourSubscriptionKey","YourServiceRegion"
weatherfilename="en-us_zh-cn.wav"

# Currently the v2 endpoint is required. In a future SDK release you won't need to set it. 
endpoint_string = "wss://{}.stt.speech.microsoft.com/speech/universal/v2".format(service_region)
speech_config = speechsdk.SpeechConfig(subscription=speech_key, endpoint=endpoint_string)
audio_config = speechsdk.audio.AudioConfig(filename=weatherfilename)

# Set the LanguageIdMode (Optional; Either Continuous or AtStart are accepted; Default AtStart)
speech_config.set_property(property_id=speechsdk.PropertyId.SpeechServiceConnection_LanguageIdMode, value='Continuous')

auto_detect_source_language_config = speechsdk.languageconfig.AutoDetectSourceLanguageConfig(
    languages=["en-US", "de-DE", "zh-CN"])

speech_recognizer = speechsdk.SpeechRecognizer(
    speech_config=speech_config, 
    auto_detect_source_language_config=auto_detect_source_language_config,
    audio_config=audio_config)

done = False

def stop_cb(evt):
    """callback that signals to stop continuous recognition upon receiving an event `evt`"""
    print('CLOSING on {}'.format(evt))
    nonlocal done
    done = True

# Connect callbacks to the events fired by the speech recognizer
speech_recognizer.recognizing.connect(lambda evt: print('RECOGNIZING: {}'.format(evt)))
speech_recognizer.recognized.connect(lambda evt: print('RECOGNIZED: {}'.format(evt)))
speech_recognizer.session_started.connect(lambda evt: print('SESSION STARTED: {}'.format(evt)))
speech_recognizer.session_stopped.connect(lambda evt: print('SESSION STOPPED {}'.format(evt)))
speech_recognizer.canceled.connect(lambda evt: print('CANCELED {}'.format(evt)))
# stop continuous recognition on either session stopped or canceled events
speech_recognizer.session_stopped.connect(stop_cb)
speech_recognizer.canceled.connect(stop_cb)

# Start continuous speech recognition
speech_recognizer.start_continuous_recognition()
while not done:
    time.sleep(.5)

speech_recognizer.stop_continuous_recognition()

NSArray *languages = @[@"en-US", @"de-DE", @"zh-CN"];
SPXAutoDetectSourceLanguageConfiguration* autoDetectSourceLanguageConfig = \
        [[SPXAutoDetectSourceLanguageConfiguration alloc]init:languages];
SPXSpeechRecognizer* speechRecognizer = \
        [[SPXSpeechRecognizer alloc] initWithSpeechConfiguration:speechConfig
                           autoDetectSourceLanguageConfiguration:autoDetectSourceLanguageConfig
                                              audioConfiguration:audioConfig];
SPXSpeechRecognitionResult *result = [speechRecognizer recognizeOnce];
SPXAutoDetectSourceLanguageResult *languageDetectionResult = [[SPXAutoDetectSourceLanguageResult alloc] init:result];
NSString *detectedLanguage = [languageDetectionResult language];

var autoDetectSourceLanguageConfig = SpeechSDK.AutoDetectSourceLanguageConfig.fromLanguages(["en-US", "de-DE"]);
var speechRecognizer = SpeechSDK.SpeechRecognizer.FromConfig(speechConfig, autoDetectSourceLanguageConfig, audioConfig);
speechRecognizer.recognizeOnceAsync((result: SpeechSDK.SpeechRecognitionResult) => {
        var languageDetectionResult = SpeechSDK.AutoDetectSourceLanguageResult.fromResult(result);
        var detectedLanguage = languageDetectionResult.language;
},
{});

Anpassade modeller för tal till text

Kommentar

Språkidentifiering med anpassade modeller kan bara användas med tal till text och talöversättning i realtid. Batch-transkription stöder endast språkidentifiering för standardbasmodeller.

Det här exemplet visar hur du använder språkidentifiering med en anpassad slutpunkt. Om det identifierade språket är en-USanvänder exemplet standardmodellen. Om det identifierade språket är fr-FRanvänder exemplet slutpunkten för den anpassade modellen. Mer information finns i Distribuera en anpassad talmodell.

var sourceLanguageConfigs = new SourceLanguageConfig[]
{
    SourceLanguageConfig.FromLanguage("en-US"),
    SourceLanguageConfig.FromLanguage("fr-FR", "The Endpoint Id for custom model of fr-FR")
};
var autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.FromSourceLanguageConfigs(
        sourceLanguageConfigs);

Det här exemplet visar hur du använder språkidentifiering med en anpassad slutpunkt. Om det identifierade språket är en-USanvänder exemplet standardmodellen. Om det identifierade språket är fr-FRanvänder exemplet slutpunkten för den anpassade modellen. Mer information finns i Distribuera en anpassad talmodell.

std::vector<std::shared_ptr<SourceLanguageConfig>> sourceLanguageConfigs;
sourceLanguageConfigs.push_back(
    SourceLanguageConfig::FromLanguage("en-US"));
sourceLanguageConfigs.push_back(
    SourceLanguageConfig::FromLanguage("fr-FR", "The Endpoint Id for custom model of fr-FR"));

auto autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig::FromSourceLanguageConfigs(
        sourceLanguageConfigs);

Det här exemplet visar hur du använder språkidentifiering med en anpassad slutpunkt. Om det identifierade språket är en-USanvänder exemplet standardmodellen. Om det identifierade språket är fr-FRanvänder exemplet slutpunkten för den anpassade modellen. Mer information finns i Distribuera en anpassad talmodell.

List sourceLanguageConfigs = new ArrayList<SourceLanguageConfig>();
sourceLanguageConfigs.add(
    SourceLanguageConfig.fromLanguage("en-US"));
sourceLanguageConfigs.add(
    SourceLanguageConfig.fromLanguage("fr-FR", "The Endpoint Id for custom model of fr-FR"));

AutoDetectSourceLanguageConfig autoDetectSourceLanguageConfig =
    AutoDetectSourceLanguageConfig.fromSourceLanguageConfigs(
        sourceLanguageConfigs);

Det här exemplet visar hur du använder språkidentifiering med en anpassad slutpunkt. Om det identifierade språket är en-USanvänder exemplet standardmodellen. Om det identifierade språket är fr-FRanvänder exemplet slutpunkten för den anpassade modellen. Mer information finns i Distribuera en anpassad talmodell.

 en_language_config = speechsdk.languageconfig.SourceLanguageConfig("en-US")
 fr_language_config = speechsdk.languageconfig.SourceLanguageConfig("fr-FR", "The Endpoint Id for custom model of fr-FR")
 auto_detect_source_language_config = speechsdk.languageconfig.AutoDetectSourceLanguageConfig(
        sourceLanguageConfigs=[en_language_config, fr_language_config])

Det här exemplet visar hur du använder språkidentifiering med en anpassad slutpunkt. Om det identifierade språket är en-USanvänder exemplet standardmodellen. Om det identifierade språket är fr-FRanvänder exemplet slutpunkten för den anpassade modellen. Mer information finns i Distribuera en anpassad talmodell.

SPXSourceLanguageConfiguration* enLanguageConfig = [[SPXSourceLanguageConfiguration alloc]init:@"en-US"];
SPXSourceLanguageConfiguration* frLanguageConfig = \
        [[SPXSourceLanguageConfiguration alloc]initWithLanguage:@"fr-FR"
                                                     endpointId:@"The Endpoint Id for custom model of fr-FR"];
NSArray *languageConfigs = @[enLanguageConfig, frLanguageConfig];
SPXAutoDetectSourceLanguageConfiguration* autoDetectSourceLanguageConfig = \
        [[SPXAutoDetectSourceLanguageConfiguration alloc]initWithSourceLanguageConfigurations:languageConfigs];

var enLanguageConfig = SpeechSDK.SourceLanguageConfig.fromLanguage("en-US");
var frLanguageConfig = SpeechSDK.SourceLanguageConfig.fromLanguage("fr-FR", "The Endpoint Id for custom model of fr-FR");
var autoDetectSourceLanguageConfig = SpeechSDK.AutoDetectSourceLanguageConfig.fromSourceLanguageConfigs([enLanguageConfig, frLanguageConfig]);

Köra talöversättning

Använd Talöversättning när du behöver identifiera språket i en ljudkälla och sedan översätta det till ett annat språk. Mer information finns i Översikt över talöversättning.

Kommentar

Talöversättning med språkidentifiering stöds endast med Speech SDK:er i C#, C++, JavaScript och Python. För närvarande för talöversättning med språkidentifiering måste du skapa en SpeechConfig från slutpunktssträngen wss://{region}.stt.speech.microsoft.com/speech/universal/v2 , enligt kodexemplen. I en framtida SDK-version behöver du inte ange den.

Se fler exempel på talöversättning med språkidentifiering på GitHub.

Identifiera en gång

using Microsoft.CognitiveServices.Speech;
using Microsoft.CognitiveServices.Speech.Audio;
using Microsoft.CognitiveServices.Speech.Translation;

public static async Task RecognizeOnceSpeechTranslationAsync()
{
    var region = "YourServiceRegion";
    // Currently the v2 endpoint is required. In a future SDK release you won't need to set it.
    var endpointString = $"wss://{region}.stt.speech.microsoft.com/speech/universal/v2";
    var endpointUrl = new Uri(endpointString);

    var config = SpeechTranslationConfig.FromEndpoint(endpointUrl, "YourSubscriptionKey");

    // Source language is required, but currently ignored. 
    string fromLanguage = "en-US";
    speechTranslationConfig.SpeechRecognitionLanguage = fromLanguage;

    speechTranslationConfig.AddTargetLanguage("de");
    speechTranslationConfig.AddTargetLanguage("fr");

    var autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig.FromLanguages(new string[] { "en-US", "de-DE", "zh-CN" });

    using var audioConfig = AudioConfig.FromDefaultMicrophoneInput();

    using (var recognizer = new TranslationRecognizer(
        speechTranslationConfig, 
        autoDetectSourceLanguageConfig,
        audioConfig))
    {

        Console.WriteLine("Say something or read from file...");
        var result = await recognizer.RecognizeOnceAsync().ConfigureAwait(false);

        if (result.Reason == ResultReason.TranslatedSpeech)
        {
            var lidResult = result.Properties.GetProperty(PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult);

            Console.WriteLine($"RECOGNIZED in '{lidResult}': Text={result.Text}");
            foreach (var element in result.Translations)
            {
                Console.WriteLine($"    TRANSLATED into '{element.Key}': {element.Value}");
            }
        }
    }
}

Kontinuerlig igenkänning

using Microsoft.CognitiveServices.Speech;
using Microsoft.CognitiveServices.Speech.Audio;
using Microsoft.CognitiveServices.Speech.Translation;

public static async Task MultiLingualTranslation()
{
    var region = "YourServiceRegion";
    // Currently the v2 endpoint is required. In a future SDK release you won't need to set it.
    var endpointString = $"wss://{region}.stt.speech.microsoft.com/speech/universal/v2";
    var endpointUrl = new Uri(endpointString);

    var config = SpeechTranslationConfig.FromEndpoint(endpointUrl, "YourSubscriptionKey");

    // Source language is required, but currently ignored. 
    string fromLanguage = "en-US";
    config.SpeechRecognitionLanguage = fromLanguage;

    config.AddTargetLanguage("de");
    config.AddTargetLanguage("fr");

    // Set the LanguageIdMode (Optional; Either Continuous or AtStart are accepted; Default AtStart)
    config.SetProperty(PropertyId.SpeechServiceConnection_LanguageIdMode, "Continuous");
    var autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig.FromLanguages(new string[] { "en-US", "de-DE", "zh-CN" });

    var stopTranslation = new TaskCompletionSource<int>();
    using (var audioInput = AudioConfig.FromWavFileInput(@"en-us_zh-cn.wav"))
    {
        using (var recognizer = new TranslationRecognizer(config, autoDetectSourceLanguageConfig, audioInput))
        {
            recognizer.Recognizing += (s, e) =>
            {
                var lidResult = e.Result.Properties.GetProperty(PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult);

                Console.WriteLine($"RECOGNIZING in '{lidResult}': Text={e.Result.Text}");
                foreach (var element in e.Result.Translations)
                {
                    Console.WriteLine($"    TRANSLATING into '{element.Key}': {element.Value}");
                }
            };

            recognizer.Recognized += (s, e) => {
                if (e.Result.Reason == ResultReason.TranslatedSpeech)
                {
                    var lidResult = e.Result.Properties.GetProperty(PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult);

                    Console.WriteLine($"RECOGNIZED in '{lidResult}': Text={e.Result.Text}");
                    foreach (var element in e.Result.Translations)
                    {
                        Console.WriteLine($"    TRANSLATED into '{element.Key}': {element.Value}");
                    }
                }
                else if (e.Result.Reason == ResultReason.RecognizedSpeech)
                {
                    Console.WriteLine($"RECOGNIZED: Text={e.Result.Text}");
                    Console.WriteLine($"    Speech not translated.");
                }
                else if (e.Result.Reason == ResultReason.NoMatch)
                {
                    Console.WriteLine($"NOMATCH: Speech could not be recognized.");
                }
            };

            recognizer.Canceled += (s, e) =>
            {
                Console.WriteLine($"CANCELED: Reason={e.Reason}");

                if (e.Reason == CancellationReason.Error)
                {
                    Console.WriteLine($"CANCELED: ErrorCode={e.ErrorCode}");
                    Console.WriteLine($"CANCELED: ErrorDetails={e.ErrorDetails}");
                    Console.WriteLine($"CANCELED: Did you set the speech resource key and region values?");
                }

                stopTranslation.TrySetResult(0);
            };

            recognizer.SpeechStartDetected += (s, e) => {
                Console.WriteLine("\nSpeech start detected event.");
            };

            recognizer.SpeechEndDetected += (s, e) => {
                Console.WriteLine("\nSpeech end detected event.");
            };

            recognizer.SessionStarted += (s, e) => {
                Console.WriteLine("\nSession started event.");
            };

            recognizer.SessionStopped += (s, e) => {
                Console.WriteLine("\nSession stopped event.");
                Console.WriteLine($"\nStop translation.");
                stopTranslation.TrySetResult(0);
            };

            // Starts continuous recognition. Uses StopContinuousRecognitionAsync() to stop recognition.
            Console.WriteLine("Start translation...");
            await recognizer.StartContinuousRecognitionAsync().ConfigureAwait(false);

            Task.WaitAny(new[] { stopTranslation.Task });
            await recognizer.StopContinuousRecognitionAsync().ConfigureAwait(false);
        }
    }
}

Se fler exempel på talöversättning med språkidentifiering på GitHub.

Identifiera en gång

auto region = "YourServiceRegion";
// Currently the v2 endpoint is required. In a future SDK release you won't need to set it.
auto endpointString = std::format("wss://{}.stt.speech.microsoft.com/speech/universal/v2", region);
auto config = SpeechTranslationConfig::FromEndpoint(endpointString, "YourSubscriptionKey");

auto autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig::FromLanguages({ "en-US", "de-DE" });

// Sets source and target languages
// The source language will be detected by the language detection feature. 
// However, the SpeechRecognitionLanguage still need to set with a locale string, but it will not be used as the source language.
// This will be fixed in a future version of Speech SDK.
auto fromLanguage = "en-US";
config->SetSpeechRecognitionLanguage(fromLanguage);
config->AddTargetLanguage("de");
config->AddTargetLanguage("fr");

// Creates a translation recognizer using microphone as audio input.
auto recognizer = TranslationRecognizer::FromConfig(config, autoDetectSourceLanguageConfig);
cout << "Say something...\n";

// Starts translation, and returns after a single utterance is recognized. The end of a
// single utterance is determined by listening for silence at the end or until a maximum of 15
// seconds of audio is processed. The task returns the recognized text as well as the translation.
// Note: Since RecognizeOnceAsync() returns only a single utterance, it is suitable only for single
// shot recognition like command or query.
// For long-running multi-utterance recognition, use StartContinuousRecognitionAsync() instead.
auto result = recognizer->RecognizeOnceAsync().get();

// Checks result.
if (result->Reason == ResultReason::TranslatedSpeech)
{
    cout << "RECOGNIZED: Text=" << result->Text << std::endl;

    for (const auto& it : result->Translations)
    {
        cout << "TRANSLATED into '" << it.first.c_str() << "': " << it.second.c_str() << std::endl;
    }
}
else if (result->Reason == ResultReason::RecognizedSpeech)
{
    cout << "RECOGNIZED: Text=" << result->Text << " (text could not be translated)" << std::endl;
}
else if (result->Reason == ResultReason::NoMatch)
{
    cout << "NOMATCH: Speech could not be recognized." << std::endl;
}
else if (result->Reason == ResultReason::Canceled)
{
    auto cancellation = CancellationDetails::FromResult(result);
    cout << "CANCELED: Reason=" << (int)cancellation->Reason << std::endl;

    if (cancellation->Reason == CancellationReason::Error)
    {
        cout << "CANCELED: ErrorCode=" << (int)cancellation->ErrorCode << std::endl;
        cout << "CANCELED: ErrorDetails=" << cancellation->ErrorDetails << std::endl;
        cout << "CANCELED: Did you set the speech resource key and region values?" << std::endl;
    }
}

Kontinuerlig igenkänning

using namespace std;
using namespace Microsoft::CognitiveServices::Speech;
using namespace Microsoft::CognitiveServices::Speech::Audio;
using namespace Microsoft::CognitiveServices::Speech::Translation;

void MultiLingualTranslation()
{
    auto region = "YourServiceRegion";
    // Currently the v2 endpoint is required. In a future SDK release you won't need to set it.
    auto endpointString = std::format("wss://{}.stt.speech.microsoft.com/speech/universal/v2", region);
    auto config = SpeechTranslationConfig::FromEndpoint(endpointString, "YourSubscriptionKey");

    // Set the LanguageIdMode (Optional; Either Continuous or AtStart are accepted; Default AtStart)
    speechConfig->SetProperty(PropertyId::SpeechServiceConnection_LanguageIdMode, "Continuous");
    auto autoDetectSourceLanguageConfig = AutoDetectSourceLanguageConfig::FromLanguages({ "en-US", "de-DE", "zh-CN" });

    promise<void> recognitionEnd;
    // Source language is required, but currently ignored. 
    auto fromLanguage = "en-US";
    config->SetSpeechRecognitionLanguage(fromLanguage);
    config->AddTargetLanguage("de");
    config->AddTargetLanguage("fr");

    auto audioInput = AudioConfig::FromWavFileInput("whatstheweatherlike.wav");
    auto recognizer = TranslationRecognizer::FromConfig(config, autoDetectSourceLanguageConfig, audioInput);

    recognizer->Recognizing.Connect([](const TranslationRecognitionEventArgs& e)
        {
            std::string lidResult = e.Result->Properties.GetProperty(PropertyId::SpeechServiceConnection_AutoDetectSourceLanguageResult);

            cout << "Recognizing in Language = "<< lidResult << ":" << e.Result->Text << std::endl;
            for (const auto& it : e.Result->Translations)
            {
                cout << "  Translated into '" << it.first.c_str() << "': " << it.second.c_str() << std::endl;
            }
        });

    recognizer->Recognized.Connect([](const TranslationRecognitionEventArgs& e)
        {
            if (e.Result->Reason == ResultReason::TranslatedSpeech)
            {
                std::string lidResult = e.Result->Properties.GetProperty(PropertyId::SpeechServiceConnection_AutoDetectSourceLanguageResult);
                cout << "RECOGNIZED in Language = " << lidResult << ": Text=" << e.Result->Text << std::endl;
            }
            else if (e.Result->Reason == ResultReason::RecognizedSpeech)
            {
                cout << "RECOGNIZED: Text=" << e.Result->Text << " (text could not be translated)" << std::endl;
            }
            else if (e.Result->Reason == ResultReason::NoMatch)
            {
                cout << "NOMATCH: Speech could not be recognized." << std::endl;
            }

            for (const auto& it : e.Result->Translations)
            {
                cout << "  Translated into '" << it.first.c_str() << "': " << it.second.c_str() << std::endl;
            }
        });

    recognizer->Canceled.Connect([&recognitionEnd](const TranslationRecognitionCanceledEventArgs& e)
        {
            cout << "CANCELED: Reason=" << (int)e.Reason << std::endl;
            if (e.Reason == CancellationReason::Error)
            {
                cout << "CANCELED: ErrorCode=" << (int)e.ErrorCode << std::endl;
                cout << "CANCELED: ErrorDetails=" << e.ErrorDetails << std::endl;
                cout << "CANCELED: Did you set the speech resource key and region values?" << std::endl;

                recognitionEnd.set_value();
            }
        });

    recognizer->Synthesizing.Connect([](const TranslationSynthesisEventArgs& e)
        {
            auto size = e.Result->Audio.size();
            cout << "Translation synthesis result: size of audio data: " << size
                << (size == 0 ? "(END)" : "");
        });

    recognizer->SessionStopped.Connect([&recognitionEnd](const SessionEventArgs& e)
        {
            cout << "Session stopped.";
            recognitionEnd.set_value();
        });

    // Starts continuos recognition. Use StopContinuousRecognitionAsync() to stop recognition.
    recognizer->StartContinuousRecognitionAsync().get();
    recognitionEnd.get_future().get();
    recognizer->StopContinuousRecognitionAsync().get();
}

Se fler exempel på talöversättning med språkidentifiering på GitHub.

Identifiera en gång

import azure.cognitiveservices.speech as speechsdk
import time
import json

speech_key, service_region = "YourSubscriptionKey","YourServiceRegion"
weatherfilename="en-us_zh-cn.wav"

# set up translation parameters: source language and target languages
# Currently the v2 endpoint is required. In a future SDK release you won't need to set it. 
endpoint_string = "wss://{}.stt.speech.microsoft.com/speech/universal/v2".format(service_region)
translation_config = speechsdk.translation.SpeechTranslationConfig(
    subscription=speech_key,
    endpoint=endpoint_string,
    speech_recognition_language='en-US',
    target_languages=('de', 'fr'))
audio_config = speechsdk.audio.AudioConfig(filename=weatherfilename)

# Specify the AutoDetectSourceLanguageConfig, which defines the number of possible languages
auto_detect_source_language_config = speechsdk.languageconfig.AutoDetectSourceLanguageConfig(languages=["en-US", "de-DE", "zh-CN"])

# Creates a translation recognizer using and audio file as input.
recognizer = speechsdk.translation.TranslationRecognizer(
    translation_config=translation_config, 
    audio_config=audio_config,
    auto_detect_source_language_config=auto_detect_source_language_config)

# Starts translation, and returns after a single utterance is recognized. The end of a
# single utterance is determined by listening for silence at the end or until a maximum of 15
# seconds of audio is processed. The task returns the recognition text as result.
# Note: Since recognize_once() returns only a single utterance, it is suitable only for single
# shot recognition like command or query.
# For long-running multi-utterance recognition, use start_continuous_recognition() instead.
result = recognizer.recognize_once()

# Check the result
if result.reason == speechsdk.ResultReason.TranslatedSpeech:
    print("""Recognized: {}
    German translation: {}
    French translation: {}""".format(
        result.text, result.translations['de'], result.translations['fr']))
elif result.reason == speechsdk.ResultReason.RecognizedSpeech:
    print("Recognized: {}".format(result.text))
    detectedSrcLang = result.properties[speechsdk.PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult]
    print("Detected Language: {}".format(detectedSrcLang))
elif result.reason == speechsdk.ResultReason.NoMatch:
    print("No speech could be recognized: {}".format(result.no_match_details))
elif result.reason == speechsdk.ResultReason.Canceled:
    print("Translation canceled: {}".format(result.cancellation_details.reason))
    if result.cancellation_details.reason == speechsdk.CancellationReason.Error:
        print("Error details: {}".format(result.cancellation_details.error_details))

Kontinuerlig igenkänning

import azure.cognitiveservices.speech as speechsdk
import time
import json

speech_key, service_region = "YourSubscriptionKey","YourServiceRegion"
weatherfilename="en-us_zh-cn.wav"

# Currently the v2 endpoint is required. In a future SDK release you won't need to set it. 
endpoint_string = "wss://{}.stt.speech.microsoft.com/speech/universal/v2".format(service_region)
translation_config = speechsdk.translation.SpeechTranslationConfig(
    subscription=speech_key,
    endpoint=endpoint_string,
    speech_recognition_language='en-US',
    target_languages=('de', 'fr'))
audio_config = speechsdk.audio.AudioConfig(filename=weatherfilename)

# Set the LanguageIdMode (Optional; Either Continuous or AtStart are accepted; Default AtStart)
translation_config.set_property(property_id=speechsdk.PropertyId.SpeechServiceConnection_LanguageIdMode, value='Continuous')

# Specify the AutoDetectSourceLanguageConfig, which defines the number of possible languages
auto_detect_source_language_config = speechsdk.languageconfig.AutoDetectSourceLanguageConfig(languages=["en-US", "de-DE", "zh-CN"])

# Creates a translation recognizer using and audio file as input.
recognizer = speechsdk.translation.TranslationRecognizer(
    translation_config=translation_config, 
    audio_config=audio_config,
    auto_detect_source_language_config=auto_detect_source_language_config)

def result_callback(event_type, evt):
    """callback to display a translation result"""
    print("{}: {}\n\tTranslations: {}\n\tResult Json: {}".format(
        event_type, evt, evt.result.translations.items(), evt.result.json))

done = False

def stop_cb(evt):
    """callback that signals to stop continuous recognition upon receiving an event `evt`"""
    print('CLOSING on {}'.format(evt))
    nonlocal done
    done = True

# connect callback functions to the events fired by the recognizer
recognizer.session_started.connect(lambda evt: print('SESSION STARTED: {}'.format(evt)))
recognizer.session_stopped.connect(lambda evt: print('SESSION STOPPED {}'.format(evt)))
# event for intermediate results
recognizer.recognizing.connect(lambda evt: result_callback('RECOGNIZING', evt))
# event for final result
recognizer.recognized.connect(lambda evt: result_callback('RECOGNIZED', evt))
# cancellation event
recognizer.canceled.connect(lambda evt: print('CANCELED: {} ({})'.format(evt, evt.reason)))

# stop continuous recognition on either session stopped or canceled events
recognizer.session_stopped.connect(stop_cb)
recognizer.canceled.connect(stop_cb)

def synthesis_callback(evt):
    """
    callback for the synthesis event
    """
    print('SYNTHESIZING {}\n\treceived {} bytes of audio. Reason: {}'.format(
        evt, len(evt.result.audio), evt.result.reason))
    if evt.result.reason == speechsdk.ResultReason.RecognizedSpeech:
        print("RECOGNIZED: {}".format(evt.result.properties))
        if evt.result.properties.get(speechsdk.PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult) == None:
            print("Unable to detect any language")
        else:
            detectedSrcLang = evt.result.properties[speechsdk.PropertyId.SpeechServiceConnection_AutoDetectSourceLanguageResult]
            jsonResult = evt.result.properties[speechsdk.PropertyId.SpeechServiceResponse_JsonResult]
            detailResult = json.loads(jsonResult)
            startOffset = detailResult['Offset']
            duration = detailResult['Duration']
            if duration >= 0:
                endOffset = duration + startOffset
            else:
                endOffset = 0
            print("Detected language = " + detectedSrcLang + ", startOffset = " + str(startOffset) + " nanoseconds, endOffset = " + str(endOffset) + " nanoseconds, Duration = " + str(duration) + " nanoseconds.")
            global language_detected
            language_detected = True

# connect callback to the synthesis event
recognizer.synthesizing.connect(synthesis_callback)

# start translation
recognizer.start_continuous_recognition()

while not done:
    time.sleep(.5)

recognizer.stop_continuous_recognition()

Köra och använda en container

Talcontainrar tillhandahåller websocketbaserade frågeslutpunkts-API:er som nås via Speech SDK och Speech CLI. Som standard använder Speech SDK och Speech CLI den offentliga Speech-tjänsten. Om du vill använda containern måste du ändra initieringsmetoden. Använd en containervärd-URL i stället för nyckel och region.

När du kör språk-ID i en container använder du SourceLanguageRecognizer objektet i stället för SpeechRecognizer eller TranslationRecognizer.

Mer information om containrar finns i vägledningen för talcontainrar för språkidentifiering.

Implementera transkription av tal till textbatch

Om du vill identifiera språk med REST API för Batch-transkription använder du languageIdentification egenskapen i brödtexten i din Transcriptions_Create begäran.

Varning

Batch-transkription stöder endast språkidentifiering för standardbasmodeller. Om både språkidentifiering och en anpassad modell anges i transkriptionsbegäran återgår tjänsten till att använda basmodellerna för de angivna kandidatspråken. Detta kan resultera i oväntade igenkänningsresultat.

Om ditt tal till text-scenario kräver både språkidentifiering och anpassade modeller använder du tal till text i realtid i stället för batch-transkription.

I följande exempel visas användningen av languageIdentification egenskapen med fyra kandidatspråk. Mer information om egenskaper för begäran finns i Skapa en batch-transkription.

{
    <...>
    
    "properties": {
    <...>
    
        "languageIdentification": {
            "candidateLocales": [
            "en-US",
            "ja-JP",
            "zh-CN",
            "hi-IN"
            ]
        },	
        <...>
    }
}

Relaterat innehåll

• Prova snabbstarten tal till text
• Förbättra igenkänningsprecisionen med anpassat tal
• Använda batch-transkription