Поделиться через

Примеры скриптов лаборатории развертывания

  • Статья

Скопируйте эти скрипты в корневой каталог USB-накопителя хранилища. Сведения о том, что содержится в скриптах, см. на этой странице.

Примеры zip-файла для скачивания скриптов включают все приведенные ниже скрипты.

Скрипты развертывания образов

Следующие скрипты настраивают устройства Windows с помощью WIM или файла образа FFU, а затем дают возможность настроить функции сброса кнопок.

Следующие файлы составляют скрипты развертывания:

  • ApplyImage.bat
  • ApplyRecovery.bat
  • CreatePartitions-BIOS.txt
  • CreatePartitions-BIOS-FFU.txt
  • CreatePartitions-UEFI.txt
  • CreatePartitions-UEFI-FFU.txt
  • HideRecoveryPartitions-BIOS.txt
  • HideRecoveryPartitions-UEFI.txt
  • CreateRecoveryPartitions-BIOS.txt
  • CreateRecoveryPartitions-UEFI.txt

ApplyImage.bat

Используйте этот скрипт, чтобы применить образ Windows к новому устройству.

Примечание: Если скопировать и вставить содержимое ниже для создания файла .bat, при обнаружении встроенного ПО может возникнуть ошибка. Для успешного обнаружения встроенного ПО убедитесь, что строки, которые начинаются for /f "tokens=2* delims= " %%A , имеют вкладку, за которой следует пробел между delims= и " %%A.

@echo Apply-Image.bat
@echo     Run from the reference device in the WinPE environment.
@echo.
@echo     This script erases the primary hard drive and applies a new image.
@echo.
@echo     Make sure that this script is run from the folder that contains the
@echo     supporting scripts
@echo.
@echo UPDATE (November 2017)
@echo * Added support for FFU deployments.  
@echo.
@echo UPDATE (JULY 2016):
@echo * This script stops just after applying the image.
@echo   This gives you an opportunity to add siloed provisioning packages (SPPs)
@echo   so that you can include them in your recovery tools.
@echo.
@echo   After the script is complete, use apply-recovery.bat to finish
@echo   setting up the recovery tools.
@echo.
@echo * This script creates a now includes support for the /EA variables for quicker
@echo   image capture and recovery.
@echo.
@echo * This script now includes support for the /EA variables for quicker
@echo   image capture and recovery.
@echo.
@echo * This script now checks to see if you're booted into Windows PE.
@echo.
@if not exist X:\Windows\System32 echo ERROR: This script is built to run in Windows PE.
@if not exist X:\Windows\System32 goto END
@if %1.==. echo ERROR: To run this script, add a path to a Windows image file.
@if %1.==. echo Example: ApplyImage D:\WindowsWithFrench.wim
@if %1.==. goto END
@echo *********************************************************************
@echo  == Setting high-performance power scheme to speed deployment ==
@call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
@echo *********************************************************************
@echo Checking to see the type of image being deployed
@if "%~x1" == ".wim" (GOTO WIM)
@if "%~x1" == ".ffu" (GOTO FFU)
@echo *********************************************************************
@if not "%~x1" == ".ffu". if not "%~x1" == ".wim" echo Please use this script with a WIM or FFU image.
@if not "%~x1" == ".ffu". if not "%~x1" == ".wim" GOTO END
:WIM
@echo Starting WIM Deployment
@echo *********************************************************************
@echo Checking to see if the PC is booted in BIOS or UEFI mode.
wpeutil UpdateBootInfo
for /f "tokens=2* delims=    " %%A in ('reg query HKLM\System\CurrentControlSet\Control /v PEFirmwareType') DO SET Firmware=%%B
@echo            Note: delims is a TAB followed by a space.
@if x%Firmware%==x echo ERROR: Can't figure out which firmware we're on.
@if x%Firmware%==x echo        Common fix: In the command above:
@if x%Firmware%==x echo             for /f "tokens=2* delims=    "
@if x%Firmware%==x echo        ...replace the spaces with a TAB character followed by a space.
@if x%Firmware%==x goto END
@if %Firmware%==0x1 echo The PC is booted in BIOS mode. 
@if %Firmware%==0x2 echo The PC is booted in UEFI mode. 
@echo *********************************************************************
@echo Do you want to create a Recovery partition?
@echo    (If you're going to be working with FFUs, and need 
@echo     to expand the Windows partition after applying the FFU, type N). 
@SET /P RECOVERY=(Y or N):
@if %RECOVERY%.==y. set RECOVERY=Y
@echo Formatting the primary disk...
@if %Firmware%==0x1 echo    ...using BIOS (MBR) format and partitions.
@if %Firmware%==0x2 echo    ...using UEFI (GPT) format and partitions. 
@echo CAUTION: All the data on the disk will be DELETED.
@SET /P READY=Erase all data and continue? (Y or N):
@if %READY%.==y. set READY=Y
@if not %READY%.==Y. goto END
@if %Firmware%.==0x1. if %RECOVERY%.==Y. diskpart /s CreatePartitions-BIOS.txt
@if %Firmware%.==0x1. if not %RECOVERY%.==Y. diskpart /s CreatePartitions-BIOS-FFU.txt
@if %Firmware%.==0x2. if %RECOVERY%.==Y. diskpart /s CreatePartitions-UEFI.txt
@if %Firmware%.==0x2. if not %RECOVERY%.==Y. diskpart /s CreatePartitions-UEFI-FFU.txt
@echo *********************************************************************
@echo  == Apply the image to the Windows partition ==
@SET /P COMPACTOS=Deploy as Compact OS? (Y or N):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@echo Does this image include Extended Attributes?
@echo    (If you're not sure, type N).
@SET /P EA=(Y or N):
@if %EA%.==y. set EA=Y
@if %COMPACTOS%.==Y.     if %EA%.==Y.     dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /Compact /EA
@if not %COMPACTOS%.==Y. if %EA%.==Y.     dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /EA
@if %COMPACTOS%.==Y.     if not %EA%.==Y. dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /Compact
@if not %COMPACTOS%.==Y. if not %EA%.==Y. dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\
@echo *********************************************************************
@echo == Copy boot files to the System partition ==
W:\Windows\System32\bcdboot W:\Windows /s S:
@echo *********************************************************************
@echo   Next steps:
@echo   * Add Windows Classic apps (optional):
@echo       DISM /Apply-SiloedPackage /ImagePath:W:\ 
@echo            /PackagePath:"D:\App1.spp" /PackagePath:"D:\App2.spp"  ...
@echo.
@echo   * Configure the recovery partition with ApplyRecovery.bat
@echo.      
@echo   * Reboot:
@echo       exit
@GOTO END
:FFU
@echo Starting FFU Deployment
@echo list disk > x:\listdisks.txt
@echo exit >> x:\listdisks.txt
@diskpart /s x:\listdisks.txt
@del x:\listdisks.txt
@echo Enter the disk number of the drive where you're going to deploy your FFU (usually 0).
@SET /P DISKNUMBER=(Enter the Disk Number from above):
@echo This will remove all data from disk %DISKNUMBER%. Continue?
@SET /P ERASEALL=(Y or N):
@if %ERASEALL%.==y. set ERASEALL=Y
@if %ERASEALL%==Y DISM /apply-ffu /ImageFile=%1 /ApplyDrive:\\.\PhysicalDrive%DISKNUMBER%
@if not %ERASEALL%==Y GOTO END
@echo FFU applied. Would you like to configure the recovery partition?
@SET /P CONFIGRECOVERY=(Y or N):
@if %CONFIGRECOVERY%.==y. SET CONFIGRECOVERY=Y
@if %CONFIGRECOVERY%==Y ApplyRecovery.bat
@if not %CONFIGRECOVERY%==Y GOTO END
:END

ApplyImage.bat использует следующие скрипты DiskPart, которые необходимо поместить в одну папку:

Скрипты CreatePartitions

Используйте эти скрипты вместе с DiskPart для форматирования и настройки разделов жесткого диска для Windows, включая средства восстановления. При необходимости измените размеры секций, чтобы заполнить диск.

CreatePartitions-UEFI.txt

Создает разделы System, MSR, Windows и средства восстановления для компьютеров на основе UEFI.

Этот скрипт временно назначает буквы диска: System=S, Windows=W и Recovery=R. Раздел MSR не получает письмо. Буква W используется для предотвращения потенциальных конфликтов букв диска. После перезагрузки устройства секции Windows назначается буква C, а другие секции не получают буквы диска.

Раздел восстановления должен быть разделом после раздела Windows, чтобы обеспечить актуальность winre.wim в течение всего времени существования устройства.

На следующей схеме показана итоговая конфигурация секции.

Схема макета секции по умолчанию: system, msr, windows и recovery 

rem == CreatePartitions-UEFI.txt ==
rem == These commands are used with DiskPart to
rem    create four partitions
rem    for a UEFI/GPT-based PC.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
convert gpt
rem == 1. System partition =========================
create partition efi size=100
rem    ** NOTE: For Advanced Format 4Kn drives,
rem               change this value to size = 260 ** 
format quick fs=fat32 label="System"
assign letter="S"
rem == 2. Microsoft Reserved (MSR) partition =======
create partition msr size=16
rem == 3. Windows partition ========================
rem ==    a. Create the Windows partition ==========
create partition primary 
rem ==    b. Create space for the recovery tools ===
rem       ** Update this size to match the size of
rem          the recovery tools (winre.wim)
rem          plus some free space.
shrink minimum=500
rem ==    c. Prepare the Windows partition ========= 
format quick fs=ntfs label="Windows"
assign letter="W"
rem === 4. Recovery partition ======================
create partition primary
format quick fs=ntfs label="Recovery"
assign letter="R"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
gpt attributes=0x8000000000000001
list volume
exit

CreatePartitions-UEFI-FFU.txt

Этот скрипт основан на CreatePartitions-UEFI.txt, но не создает раздел восстановления. Это необходимо для того, чтобы секция Windows была последней секцией на диске и может быть развернута. Если этот скрипт используется, раздел восстановления можно настроить позже с помощью ApplyRecovery.bat.

rem == CreatePartitions-UEFI-FFU.txt ==
rem == These commands are used with DiskPart to
rem    create four partitions
rem    for a UEFI/GPT-based PC.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
convert gpt
rem == 1. System partition =========================
create partition efi size=100
rem    ** NOTE: For Advanced Format 4Kn drives,
rem               change this value to size = 260 ** 
format quick fs=fat32 label="System"
assign letter="S"
rem == 2. Microsoft Reserved (MSR) partition =======
create partition msr size=16
rem == 3. Windows partition ========================
rem ==    a. Create the Windows partition ==========
create partition primary 
rem ==    c. Prepare the Windows partition ========= 
format quick fs=ntfs label="Windows"
assign letter="W"
list volume
exit

CreatePartitions-BIOS.txt

Создает разделы Системы, Windows и средств восстановления для компьютеров на основе BIOS.

Этот скрипт временно назначает буквы диска: System=S, Windows=W и Recovery=R. Буква W используется для предотвращения потенциальных конфликтов букв диска. После перезагрузки устройства секции Windows назначается буква C, а другие секции не получают буквы диска.

Раздел восстановления должен быть разделом после раздела Windows, чтобы обеспечить актуальность winre.wim в течение всего времени существования устройства.

На следующей схеме показана итоговая конфигурация секции.

Схема макета секции по умолчанию: система, окна и восстановление 

rem == CreatePartitions-BIOS.txt ==
rem == These commands are used with DiskPart to
rem    create three partitions
rem    for a BIOS/MBR-based computer.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
rem == 1. System partition ======================
create partition primary size=100
format quick fs=ntfs label="System"
assign letter="S"
active
rem == 2. Windows partition =====================
rem ==    a. Create the Windows partition =======
create partition primary
rem ==    b. Create space for the recovery tools  
rem       ** Update this size to match the size of
rem          the recovery tools (winre.wim)
rem          plus some free space.
shrink minimum=500
rem ==    c. Prepare the Windows partition ====== 
format quick fs=ntfs label="Windows"
assign letter="W"
rem == 3. Recovery partition ====================
create partition primary
format quick fs=ntfs label="Recovery image"
assign letter="R"
set id=27
list volume
exit

CreatePartitions-BIOS-FFU.txt

Этот скрипт основан на CreatePartitions-BIOS.txt, но не создает раздел восстановления. Это необходимо для того, чтобы секция Windows была последней секцией на диске и может быть развернута. Если этот скрипт используется, раздел восстановления можно настроить позже с помощью ApplyRecovery.bat.

rem == CreatePartitions-BIOS-FFU.txt ==
rem == These commands are used with DiskPart to
rem    create three partitions
rem    for a BIOS/MBR-based computer.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
rem == 1. System partition ======================
create partition primary size=100
format quick fs=ntfs label="System"
assign letter="S"
active
rem == 2. Windows partition =====================
rem ==    a. Create the Windows partition =======
create partition primary
rem ==    c. Prepare the Windows partition ====== 
format quick fs=ntfs label="Windows"
assign letter="W"
list volume
exit

ApplyRecovery.bat

Используйте этот скрипт для подготовки раздела восстановления Windows. Этот скрипт вызывается ApplyImage.bat, но также может выполняться самостоятельно.

Примечание: Если скопировать и вставить содержимое ниже для создания файла .bat, при обнаружении встроенного ПО может возникнуть ошибка. Для успешного обнаружения встроенного ПО убедитесь, что строки, которые начинаются for /f "tokens=2* delims= " %%A , имеют вкладку, за которой следует пробел между delims= и " %%A.

@echo == ApplyRecovery.bat ==
@rem *********************************************************************
@echo Checking to see if the PC is booted in BIOS or UEFI mode.
wpeutil UpdateBootInfo
for /f "tokens=2* delims=  " %%A in ('reg query HKLM\System\CurrentControlSet\Control /v PEFirmwareType') DO SET Firmware=%%B
@echo            Note: delims is a TAB followed by a space.
@if x%Firmware%==x echo ERROR: Can't figure out which firmware we're on.
@if x%Firmware%==x echo        Common fix: In the command above:
@if x%Firmware%==x echo             for /f "tokens=2* delims=    "
@if x%Firmware%==x echo        ...replace the spaces with a TAB character followed by a space.
@if x%Firmware%==x goto END
@if %Firmware%==0x1 echo The PC is booted in BIOS mode. 
@if %Firmware%==0x2 echo The PC is booted in UEFI mode. 
@echo  *********************************************************************
@echo Do you already have a recovery partition on this disk? (Y or N):
@SET /P RECOVERYEXIST=(Y or N):
@if %RECOVERYEXIST%.==y. set RECOVERYEXIST=Y
@if %RECOVERYEXIST%.==Y. GOTO COPYTOTOOLSPARTITION
@if not %RECOVERYEXIST%.==Y. GOTO CREATEFFURECOVERY
@echo  *********************************************************************
:COPYTOTOOLSPARTITION
@echo  == Copy the Windows RE image to the Windows RE Tools partition ==
md R:\Recovery\WindowsRE
xcopy /h W:\Windows\System32\Recovery\Winre.wim R:\Recovery\WindowsRE\
@echo  *********************************************************************
@echo  == Register the location of the recovery tools ==
W:\Windows\System32\Reagentc /Setreimage /Path R:\Recovery\WindowsRE /Target W:\Windows
@echo  *********************************************************************
@IF EXIST W:\Recovery\Customizations\USMT.ppkg (GOTO CUSTOMDATAIMAGEWIM) else goto HIDEWIMRECOVERYTOOLS
:CUSTOMDATAIMAGEWIM
@echo  == If Compact OS, single-instance the recovery provisioning package ==
@echo.     
@echo     *Note: this step only works if you created a ScanState package called
@echo      USMT.ppkg as directed in the OEM Deployment lab. If you aren't
@echo      following the steps in the lab, choose N.
@echo.      
@echo     Options: N: No
@echo              Y: Yes
@echo              D: Yes, but defer cleanup steps to first boot.
@echo                 Use this if the cleanup steps take more than 30 minutes.
@echo                 defer the cleanup steps to the first boot.
@SET /P COMPACTOS=Deploy as Compact OS? (Y, N, or D):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@if %COMPACTOS%.==d. set COMPACTOS=D
@if %COMPACTOS%.==Y. dism /Apply-CustomDataImage /CustomDataImage:W:\Recovery\Customizations\USMT.ppkg /ImagePath:W:\ /SingleInstance
@if %COMPACTOS%.==D. dism /Apply-CustomDataImage /CustomDataImage:W:\Recovery\Customizations\USMT.ppkg /ImagePath:W:\ /SingleInstance /Defer
@echo  *********************************************************************
:HIDEWIMRECOVERYTOOLS
@echo == Hiding the recovery tools partition
if %Firmware%==0x1 diskpart /s %~dp0HideRecoveryPartitions-BIOS.txt
if %Firmware%==0x2 diskpart /s %~dp0HideRecoveryPartitions-UEFI.txt
@echo *********************************************************************
@echo == Verify the configuration status of the images. ==
W:\Windows\System32\Reagentc /Info /Target W:\Windows
@echo    (Note: Windows RE status may appear as Disabled, this is OK.)
@echo *********************************************************************
@echo      All done!
@echo      Disconnect the USB drive from the reference device.
@echo      Type exit to reboot.
@echo.
GOTO END
:CREATEFFURECOVERY
@echo *********************************************************************
@echo == Creating the recovery tools partition
@if %Firmware%==0x1 diskpart /s CreateRecoveryPartitions-BIOS.txt
@if %Firmware%==0x2 diskpart /s CreateRecoveryPartitions-UEFI.txt
@echo finding the Windows Drive
@echo  *********************************************************************
@IF EXIST C:\Windows SET windowsdrive=C:\
@IF EXIST D:\Windows SET windowsdrive=D:\
@IF EXIST E:\Windows SET windowsdrive=E:\
@IF EXIST W:\Windows SET windowsdrive=W:\
@echo The Windows drive is %windowsdrive%
md R:\Recovery\WindowsRE
@echo  *********************************************************************
@echo Finding Winre.wim
@IF EXIST %windowsdrive%Recovery\WindowsRE\winre.wim SET recoveryfolder=%windowsdrive%Recovery\WindowsRE\
@IF EXIST %windowsdrive%Windows\System32\Recovery\winre.wim SET recoveryfolder=%windowsdrive%Windows\System32\Recovery\
@echo  *********************************************************************
@echo copying Winre.wim
xcopy /h %recoveryfolder%Winre.wim R:\Recovery\WindowsRE\
@echo  *********************************************************************
@echo  == Register the location of the recovery tools ==
%windowsdrive%Windows\System32\Reagentc /Setreimage /Path R:\Recovery\WindowsRE /Target %windowsdrive%Windows
@echo  *********************************************************************
@IF EXIST W:\Recovery\Customizations\USMT.ppkg (GOTO CUSTOMDATAIMAGEFFU) else goto HIDERECOVERYTOOLSFFU
:CUSTOMDATAIMAGEFFU
@echo  == If Compact OS, single-instance the recovery provisioning package ==
@echo.     
@echo     *Note: this step only works if you created a ScanState package called
@echo      USMT.ppkg as directed in the OEM Deployment lab. If you aren't
@echo      following the steps in the lab, choose N.
@echo.
@echo     Options: N: No
@echo              Y: Yes
@echo              D: Yes, but defer cleanup steps to first boot.
@echo                 Use this if the cleanup steps take more than 30 minutes.
@echo                 defer the cleanup steps to the first boot.
@SET /P COMPACTOS=Deploy as Compact OS? (Y, N, or D):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@if %COMPACTOS%.==d. set COMPACTOS=D
@if %COMPACTOS%.==Y. dism /Apply-CustomDataImage /CustomDataImage:%windowsdrive%Recovery\Customizations\USMT.ppkg /ImagePath:%windowsdrive% /SingleInstance
@if %COMPACTOS%.==D. dism /Apply-CustomDataImage /CustomDataImage:%windowsdrive%Recovery\Customizations\USMT.ppkg /ImagePath:%windowsdrive% /SingleInstance /Defer
:HIDERECOVERYTOOLSFFU
@rem *********************************************************************
@echo == Hiding the recovery tools partition
@if %Firmware%==0x1 diskpart /s HideRecoveryPartitions-BIOS.txt
@if %Firmware%==0x2 diskpart /s HideRecoveryPartitions-UEFI.txt
@echo *********************************************************************
@echo == Verify the configuration status of the images. ==
%windowsdrive%Windows\System32\Reagentc /Info /Target %windowsdrive%Windows
@echo    (Note: Windows RE status may appear as Disabled, this is OK.)
@echo *********************************************************************
@echo      All done!
@echo      Disconnect the USB drive from the reference device.
@echo      Type exit to reboot.
@GOTO END
:END

ApplyRecovery.bat использует следующие скрипты DiskPart, которые необходимо поместить в одну папку:

CreateRecoveryPartitions-UEFI.txt

rem == CreateRecoveryPartitions-UEFI.txt ==
rem == Find and label the Windows partition
rem ** This script assumes the partition layout from 
rem    CreatePartitions-UEFI or CreatePartitions-UEFI-FFU
select disk 0
select partition 3
assign letter="W"
rem == Extend the Windows partition 
extend
rem == Create space for the recovery tools  
rem ** Update this size to match the size of
rem    the recovery tools (winre.wim)
rem    plus some free space.
shrink minimum=500
rem == Create recovery partition
create partition primary
format quick fs=ntfs label="Recovery"
assign letter="R"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
gpt attributes=0x8000000000000001
list volume
exit

CreateRecoveryPartitions-BIOS.txt

rem == CreateRecoveryPartitions-BIOS.txt ==
rem == Find and label the Windows partition
rem ** This script assumes the partition layout from 
rem    CreatePartitions-BIOS or CreatePartitions-BIOS-FFU
select disk 0
select partition 2
assign letter="W"
rem == Extend the Windows partition ==
shrink minimum=500
extend
rem == Create space for the recovery tools  
rem ** Update this size to match the size of the 
rem    recovery tools (winre.wim), plus some free space.
shrink minimum=500
rem == Prepare the recovery partition ====== 
select disk 0
create partition primary
format quick fs=ntfs label="Recovery image"
assign letter="R"
set id=27
list volume
exit

HideRecoveryPartitions-UEFI.txt

rem === HideRecoveryPartitions-UEFI.txt ===
rem ** This script assumes the partition layout from 
rem    CreatePartitions-UEFI or CreatePartitions-UEFI-FFU
select disk 0
select partition 4
set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
gpt attributes=0x8000000000000001
remove
list volume
exit

HideRecoveryPartitions-BIOS.txt

rem === HideRecoveryPartitions-BIOS.txt ===
rem ** This script assumes the partition layout from 
rem    CreatePartitions-BIOS or CreatePartitions-BIOS-FFU
select disk 0
select partition 3
set id=27
remove
list volume
exit

BootToAudit

Добавьте файл ответов в образ Windows в C:\mount\windows\Windows\Panther\unattend.xml, чтобы он загрузился в режиме аудита. Этот файл ответов можно создать в диспетчере системных образов Windows.

BootToAudit-x64

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<!-- BootToAudit-x64.xml -->
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Reseal>
                <Mode>Audit</Mode>
            </Reseal>
        </component>
    </settings>
</unattend>

Сохранение параметров Windows с помощью восстановления

Windows не сохраняет автоматически параметры, созданные с помощью файлов установки unattend.xml, и настройки меню "Пуск Windows", созданные с помощью LayoutModification.xml во время полного сброса системы, ни сведения о первом входе из oobe.xml.

Чтобы убедиться, что настройки сохранены, это включает в себя шаги по возврату файлов unattend.xml, LayoutModification.xml и oobe.xml. Ниже приведены примеры скриптов, которые показывают, как сохранить эти параметры и вернуть их в нужные места. Сохраните копии unattend.xml, LayoutModification.xml, oobe.xml, а также два текстовых файла: ResetConfig.xml и EnableCustomizations.cmd, в папке C:\Recovery\OEM\:

ResetConfig.xml

<?xml version="1.0" encoding="utf-8"?>
<!-- ResetConfig.xml -->
<Reset>
  <Run Phase="BasicReset_AfterImageApply">
    <Path>EnableCustomizations.cmd</Path>
    <Duration>2</Duration>
  </Run>
  <Run Phase="FactoryReset_AfterImageApply">
    <Path>EnableCustomizations.cmd</Path>
    <Duration>2</Duration>
  </Run>
</Reset>

EnableCustomizations.cmd

rem EnableCustomizations.cmd

rem Set the variable %TARGETOS%      (Typically this is C:\Windows)
for /F "tokens=1,2,3 delims= " %%A in ('reg query "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RecoveryEnvironment" /v TargetOS') DO SET TARGETOS=%%C

rem Set the variable %TARGETOSDRIVE% (Typically this is C:)
for /F "tokens=1 delims=\" %%A in ('Echo %TARGETOS%') DO SET TARGETOSDRIVE=%%A

rem Add back Windows settings, Start menu, and OOBE.xml customizations
copy "%TARGETOSDRIVE%\Recovery\OEM\Unattend.xml" "%TARGETOS%\Panther\Unattend.xml" /y
copy "%TARGETOSDRIVE%\Recovery\OEM\LayoutModification.xml" "%TARGETOSDRIVE%\Users\Default\AppData\Local\Microsoft\Windows\Shell\LayoutModification.xml" /y
xcopy "%TARGETOSDRIVE%\Recovery\OEM\OOBE\Info" "%TARGETOS%\System32\Info\" /s

rem Recommended: Create a pagefile for devices with 1GB or less of RAM.
wpeutil CreatePageFile /path=%TARGETOSDRIVE%\PageFile.sys /size=256

Дополнительные сведения об использовании точек расширяемости для сброса кнопок см. в статье Добавление скриптов расширяемости в сброс кнопок.

Переустановка приложений windows для папки "Входящие"

Переустановите приложения Для Windows после добавления нового языка. Вы можете переустановить приложения, не удаляя их.

ReinstallInboxApps-x64.cmd

ReinstallInboxApps-x64 — это пример скрипта для переустановки приложений, которые поставляются с Windows. Это только пример, который не обязательно переустанавливать все приложения для папки "Входящие" в системе. Обязательно используйте собственный скрипт, включающий все приложения на устройстве.

Обратите внимание, что в приведенных ниже путях предполагается, что вы скопировали содержимое ISO-файла входящих приложений в папку C:\Temp\Lab\Apps\Inbox.

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.CortanaApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.CortanaApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.BingNews_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.BingNews_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.BingWeather_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.BingWeather_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.GamingApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.GamingApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.GetHelp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.GetHelp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Getstarted_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Getstarted_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.HEIFImageExtension_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.HEIFImageExtension_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  
 
DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Messaging_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Messaging_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftOfficeHub_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftOfficeHub_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftSolitaireCollection_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftSolitaireCollection_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Services.Store.Engagement.x64.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftStickyNotes_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftStickyNotes_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Paint_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Paint_8wekyb3d8bbwe.xml

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.People_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.People_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Services.Store.Engagement.x64.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ScreenSketch_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ScreenSketch_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  
 
DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.SecHealthUI_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.SecHealthUI_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.4.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.StorePurchaseApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.StorePurchaseApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Todos_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Todos_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.4.appx / dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VP9VideoExtensions_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.VP9VideoExtensions_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WebMediaExtensions_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WebMediaExtensions_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WebpImageExtension_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.WebpImageExtension_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Windows.Photos_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Windows.Photos_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsAlarms_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsAlarms_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCalculator_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCalculator_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCamera_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCamera_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsFeedbackHub_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsFeedbackHub_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsMaps_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsMaps_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsSoundRecorder_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsSoundRecorder_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsStore_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsStore_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Xbox.TCUI_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Xbox.TCUI_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxIdentityProvider_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxIdentityProvider_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxSpeechToTextOverlay_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxSpeechToTextOverlay_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxGameOverlay_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxGameOverlay_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.YourPhone_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.YourPhone_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ZuneMusic_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ZuneMusic_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ZuneVideo_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ZuneVideo_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\MicrosoftWindows.Client.WebExperience_cw5n1h2txyewy.appxbundle /licensepath:.\Appx\Microsoft.WebExperience_cw5n1h2txyewy.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx

Поиск букв диска с помощью скрипта

Используйте этот скрипт в Среде предустановки Windows, чтобы определить диск с папкой "Изображения".

@echo Find a drive that has a folder titled Images.
@for %%a in (C D E F G H I J K L M N O P Q R S T U V W X Y Z) do @if exist %%a:\Images\ set IMAGESDRIVE=%%a
@echo The Images folder is on drive: %IMAGESDRIVE%
@dir %IMAGESDRIVE%:\Images /w