Deploying Work Folders

Статья
06/01/2017

Applies To: Windows 10, Windows 7, Windows 8.1, Windows Server 2012 R2

This topic discusses the steps needed to implement Work Folders. It assumes that you’ve already read Designing a Work Folders Implementation.

To deploy Work Folders, a process that can involve multiple servers and technologies, use the following steps.

Tip

The simplest Work Folders deployment is a single file server (often called a sync server) without support for syncing over the Internet, which can be a useful deployment for a test lab or as a sync solution for domain-joined client computers. To create a simple deployment, these are minimum steps to follow:

Step 1: Obtain SSL certificates

To allow users to sync across the Internet, the URL published by Work Folders must be protected by an SSL certificate. The requirements for SSL certificates used by Work Folders are as follows:

The certificate must be issued by a trusted certification authority. For most Work Folders implementations, a publicly trusted CA is recommended, since certificates will be used by non-domain-joined, Internet-based devices.
The certificate must be valid.
The private key of the certificate must be exportable (as you will need to install the certificate on multiple servers).
The subject name of the certificate must contain the public Work Folders URL used for discovering the Work Folders service from across the Internet – this must be in the format of workfolders.<domain_name>.
Subject alternative names (SANs) must be present on the certificate listing the server name for each sync server in use.

Step 2: Create DNS records

To allow users to sync across the Internet, you must create a Host (A) record in public DNS to allow Internet clients to resolve your Work Folders URL. This DNS record should resolve to the external interface of the reverse proxy server.

On your internal network, you should create a DNS alias record for the Work Folders URL that resolves to the server names of all sync servers on the network.

Step 3: Install Work Folders on file servers

You can install Work Folders on a domain-joined server by using Server Manager or by using Windows PowerShell, locally or remotely across a network. This is useful if you are configuring multiple sync servers across your network.

To deploy the role in Server Manager, do the following:

Start the Add Roles and Features Wizard.
On the Select installation type page, choose Role-based or feature-based deployment.
On the Select destination server page, select the server on which you want to install Work Folders.
On the Select server roles page, expand File and Storage Services, expand File and iSCSI Services, and then select Work Folders.
When asked if you want to install IIS Hostable Web Core, click Ok to install the minimal version of Internet Information Services (IIS) required by Work Folders.
Click Next until you have completed the wizard.

To deploy the role by using Windows PowerShell, use the following cmdlet:

Add-WindowsFeature FS-SyncShareService

Step 4: Binding the SSL certificate on the sync servers

Work Folders installs the IIS Hostable Web Core, which is an IIS component designed to enable web services without requiring a full installation of IIS. After installing the IIS Hostable Web Core, you should bind the SSL certificate for the server to the Default Web Site on the file server. However, the IIS Hostable Web Core does not install the IIS Management console.

There are two options for binding the certificate to the Default Web Interface. To use either option you must have installed the private key for the certificate into the computer’s personal store.

Utilize the IIS management console on a server that has it installed. From within the console, connect to the file server you want to manage, and then select the Default Web Site for that server. The Default Web Site will appear disabled, but you can still edit the bindings for the site and select the certificate to bind it to that web site.

Use the netsh command to bind the certificate to the Default Web Site https interface. The command is as follows:

netsh http add sslcert ipport=<IP address>:443 certhash=<Cert thumbprint> appid={CE66697B-3AA0-49D1-BDBD-A25C8359FD5D} certstorename=MY

Step 5: Create security groups for Work Folders

Before creating sync shares, a member of the Domain Admins or Enterprise Admins groups needs to create some security groups in Active Directory Domain Services (AD DS) for Work Folders (they might also want to delegate some control as described in Step 6). Here are the groups you need:

One group per sync share to specify which users are allowed to sync with the sync share
One group for all Work Folders administrators so that they can edit an attribute on each user object that links the user to the correct sync server (if you’re going to use multiple sync servers)

Groups should follow a standard naming convention and should be used only for Work Folders to avoid potential conflicts with other security requirements.

To create the appropriate security groups, use the following procedure multiple times – once for each sync share, and once to optionally create a group for file server administrators.

To create security groups for Work Folders

Open Server Manager on a Windows Server 2012 R2 or Windows Server 2012 computer with Active Directory Administration Center installed.
On the Tools menu, click Active Directory Administration Center. Active Directory Administration Center appears.
Right-click the container where you want to create the new group (for example, the Users container of the appropriate domain or OU), click New, and then click Group.
In the Create Group window, in the Group section, specify the following settings:
- In Group name, type the name of the security group, for example: HR Sync Share Users, or Work Folders Administrators.
- In Group scope, click Security, and then click Global.
In the Members section, click Add. The Select Users, Contacts, Computers, Service Accounts or Groups dialog box appears.
Type the names of the users or groups to which you grant access to a particular sync share (if you’re creating a group to control access to a sync share), or type the names of the Work Folders administrators (if you’re going to configure user accounts to automatically discover the appropriate sync server), click OK, and then click OK again.

To create a security group by using Windows PowerShell, use the following cmdlets:

$GroupName = "Work Folders Administrators"
$DC = "DC1.contoso.com"
$ADGroupPath = "CN=Users,DC=contoso,DC=com"
$Members = "CN=Maya Bender,CN=Users,DC=contoso,DC=com","CN=Irwin Hume,CN=Users,DC=contoso,DC=com"

New-ADGroup -GroupCategory:"Security" -GroupScope:"Global" -Name:$GroupName -Path:$ADGroupPath -SamAccountName:$GroupName -Server:$DC
Set-ADGroup -Add:@{'Member'=$Members} -Identity:$GroupName -Server:$DC

Step 6: Optionally delegate user attribute control to Work Folders administrators

If you are deploying multiple sync servers and want to automatically direct users to the correct sync server, you’ll need to update an attribute on each user account in AD DS. However, this normally requires getting a member of the Domain Admins or Enterprise Admins groups to update the attributes, which can quickly become tiresome if you need to frequently add users or move them between sync servers.

For this reason, a member of the Domain Admins or Enterprise Admins groups might want to delegate the ability to modify the msDS-SyncServerURL property of user objects to the Work Folders Administrators group you created in Step 5, as described in the following procedure.

Delegate the ability to edit the msDS-SyncServerURL property on user objects in AD DS

Open Server Manager on a Windows Server 2012 R2 or Windows Server 2012 computer with Active Directory Users and Computers installed.
On the Tools menu, click Active Directory Users and Computers. Active Directory Users and Computers appears.
Right-click the OU under which all user objects exist for Work Folders (if users are stored in multiple OUs or domains, right-click the container that is common to all of the users), and then click Delegate Control…. The Delegation of Control Wizard appears.
On the Users or Groups page, click Add… and then specify the group you created for Work Folders administrators (for example, Work Folders Administrators).
On the Tasks to Delegate page, click Create a custom task to delegate.
On the Active Directory Object Type page, click Only the following objects in the folder, and then select the User objects checkbox.
On the Permissions page, clear the General checkbox, select the Property-specific checkbox, and then select the Read msDS-SyncServerUrl, and Write msDS-SyncServerUrl checkboxes.

To delegate the ability to edit the msDS-SyncServerURL property on user objects by using Windows PowerShell, use the following example script that makes use of the DsAcls command.

$GroupName = "Contoso\Work Folders Administrators"
$ADGroupPath = "CN=Users,dc=contoso,dc=com"

DsAcls $ADGroupPath /I:S /G ""$GroupName":RPWP;msDS-SyncServerUrl;user"

Note

The delegation operation might take a while to run in domains with a large number of users.

Step 7: Create sync shares for user data

At this point, you’re ready to designate a folder on the sync server to store your user’s files. This folder is called a sync share, and you can use the following procedure to create one.

If you don’t already have an NTFS volume with free space for the sync share and the user files it will contain, create a new volume and format it with the NTFS file system.
In Server Manager, click File and Storage Services, and then click Work Folders.
A list of any existing sync shares is visible at the top of the details pane. To create a new sync share, from the Tasks menu choose New Sync Share…. The New Sync Share Wizard appears.
On the Select the server and path page, specify where to store the sync share. If you already have a file share created for this user data, you can choose that share. Alternatively you can create a new folder.

Note

By default, sync shares aren’t directly accessible via a file share (unless you pick an existing file share). If you want to make a sync share accessible via a file share, use the Shares tile of Server Manager or the New-SmbShare cmdlet to create a file share, preferably with access-based enumeration enabled.
On the Specify the structure for user folders page, choose a naming convention for user folders within the sync share. There are two options available:
- User alias creates user folders that don’t include a domain name. If you are using a file share that is already in use with Folder Redirection or another user data solution, select this naming convention. You can optionally select the Sync only the following subfolder checkbox to sync only a specific subfolder, such as the Documents folder.
- User alias@domain creates user folders that include a domain name. If you aren’t using a file share already in use with Folder Redirection or another user data solution, select this naming convention to eliminate folder naming conflicts when multiple users of the share have identical aliases (which can happen if the users belong to different domains).
On the Enter the sync share name page, specify a name and a description for the sync share. This is not advertised on the network but is visible in Server Manager and Windows Powershell to help distinguish sync shares from each other.
On the Grant sync access to groups page, specify the group that you created that lists the users allowed to use this sync share.

Important

To improve performance and security, grant access to groups instead of individual users and be as specific as possible, avoiding generic groups such as Authenticated Users and Domain Users. Granting access to groups with large numbers of users increases the time it takes Work Folders to query AD DS. If you have a large number of users, create multiple sync shares to help disperse the load.
On the Specify device policies page, specify whether to request any security restrictions on client PCs and devices. There are two device policies that can be individually selected:
- Encrypt Work Folders Requests that Work Folders be encrypted on client PCs and devices
- Automatically lock screen, and require a password Requests that client PCs and devices automatically lock their screens after 15 minutes, require a six-character or longer password to unlock the screen, and activate a device lockout mode after 10 failed retries
  
  Important
  
  To enforce password policies for Windows 7 PCs and for non-administrators on domain-joined PCs, use Group Policy password policies for the computer domains and exclude these domains from the Work Folders password policies. You can exclude domains by using the Set-Syncshare -PasswordAutoExcludeDomain cmdlet after creating the sync share. For information about setting Group Policy password policies, see Password Policy.
Review your selections and complete the wizard to create the sync share.

You can create sync shares using Windows PowerShell by using the New-SyncShare cmdlet. Below is an example of this method:

New-SyncShare "HR Sync Share" K:\Share-1 –User "HR Sync Share Users"

The example above creates a new sync share named Share01 with the path K:\Share-1, and access granted to the group named HR Sync Share Users

Tip

After you create sync shares you can use File Server Resource Manager functionality to manage the data in the shares. For example, you can use the Quota tile inside the Work Folders page in Server Manager to set quotas on the user folders. You can also use File Screening Management to control the types of files that Work Folders will sync, or you can use the scenarios described in Dynamic Access Control for more sophisticated file classification tasks.

Step 8: Optionally specify a tech support email address and Active Directory Federation Services authentication

After installing Work Folders on a file server, you probably want to specify an administrative contact email address for the server, and you might want to enable Active Directory Federation Services (AD FS) authentication. To do either of these tasks, use the following procedure:

Specifying an administrative contact email or AD FS authentication

In Server Manager, click File and Storage Services, and then click Servers.
Right-click the sync server, and then click Work Folders Settings. The Work Folders Settings window appears.
On the Authentication page, optionally choose Active Directory Federation Services and specify a Federation Service URL. For more information about AD FS, see Active Directory Federation Services, and Deploying Work Folders with AD FS and Web Application Proxy (WAP).

Note

If the sync server isn’t in the same Active Directory site as the AD FS server and the network traffic must go through a proxy server, you need to configure the sync server to use the correct proxy configuration. For more information, see the following topic: How to configure a proxy server for the Work Folders service.
In the navigation pane, click Support Email and then type the email address or addresses that users should use when emailing for help with Work Folders. Click OK when you’re finished.

Work Folders users can click a link in the Work Folders Control Panel item that sends an email containing diagnostic information about the client PC to the address(es) you specify here.

Step 9: Optionally set up server automatic discovery

If you are hosting multiple sync servers in your environment, you should configure server automatic discovery by populating the msDS-SyncServerURL property on user accounts in AD DS.

Before you can do so, you must install a Windows Server 2012 R2 domain controller or update the forest and domain schemas by using the Adprep /forestprep and Adprep /domainprep commands. For information on how to safely run these commands, see Running Adprep.

You probably also want to create a security group for file server administrators and give them delegated permissions to modify this particular user attribute, as described in Step 5 and Step 6. Without these steps you would need to get a member of the Domain Admins or Enterprise Admins group to configure automatic discovery for each user.

To specify the sync server for users

Open Server Manager on a computer with Active Directory Administration Tools installed.
On the Tools menu, click Active Directory Administration Center. Active Directory Administration Center appears.
Navigate to the Users container in the appropriate domain, right-click the user you want to assign to a sync share, and then click Properties.
In the Navigation pane, click Extensions.
Click the Attribute Editor tab, select msDS-SyncServerUrl and then click Edit. The Multi-valued String Editor dialog box appears.
In the Value to add box, type the URL of the sync server with which you want this user to sync, click Add, click OK, and then click OK again.

Note

The sync server URL is simply https:// or https:// (depending on whether you want to require a secure connection) followed by the fully qualified domain name of the sync server. For example, https://sync1.contoso.com.

To populate the attribute for multiple users, use Active Directory PowerShell. Below is an example that populates the attribute for all members of the HR Sync Share Users group, discussed in Step 5.

$SyncServerURL = "https://sync1.contoso.com"
$GroupName = "HR Sync Share Users"

Get-ADGroupMember -Identity $GroupName |
Set-ADUser –Add @{"msDS-SyncServerURL"=$SyncServerURL}

Step 10: Optionally Configure Web Application Proxy or another reverse proxy

To enable users to sync their Work Folders across the Internet, you need to publish Work Folders through a reverse proxy, making Work Folders available externally on the Internet. You can use Web Application Proxy, which is included in Active Directory Federation Services (AD FS), to publish Work Folders on the Internet, or you can use another reverse proxy solution.

For a walkthrough of setting up Work Folders with AD FS and Web Application Proxy, see Deploying Work Folders with AD FS and Web Application Proxy (WAP). For background information about Web Application Proxy, see Web Application Proxy Walkthrough Guide. For details on publishing applications such as Work Folders on the Internet using Web Application Proxy, see Connect to Applications and Services from Anywhere with Web Application Proxy.

Step 11: Optionally use Group Policy to configure domain-joined PCs

If you have a large number of domain-joined PCs to which you want to deploy Work Folders, you can use Group Policy to do the following client PC configuration tasks:

Specify which sync server users should sync with
Force Work Folders to be set up automatically, using default settings (review the Group Policy discussion in Designing a Work Folders Implementation before doing this)

To control these settings, create a new Group Policy object (GPO) for Work Folders and then configure the following Group Policy settings as appropriate:

"Specify Work Folders settings" policy setting in User Configuration\Policies\Administrative Templates\Windows Components\WorkFolders
“Force automatic setup for all users” policy setting in Computer Configuration\Policies\Administrative Templates\Windows Components\WorkFolders