Connected Standby Stress with Driver Verifier's Concurrency Stress (Logo)
This test causes the system to enter and exit Connected Standby by pressing a software power button. It also performs I/O on devices before entering Connected Standby.
Test details
Associated requirements |
System.Fundamentals.PowerManagement.CS.CSQuality |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~480 minutes |
Categories |
Certification Reliability |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting System Fundamentals Testing.
This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.
More information
| Parameter | Description |
|---|---|
DQ |
The SDEL device query. |
TestCycles |
The number of test cycles for this test. |
DelayBetweenCycles |
The delay time in milliseconds between each test cycle. |
IODuration |
The I/O duration in milliseconds. |
CSDuration |
The Connected Standby duration in milliseconds. |
VerifierFlags |
The Driver Verifier flags to enable. |
TestTimeoutValue |
The timeout value for the execution of te.exe. |
OptTeCmdlineParams |
The optional command line parameters for te.exe. |
Parameters
Command syntax
| Command option | Description |
|---|---|
TE.exe /inproc /enablewttlogging /appendwttlogging csstresscuzz.dll /p:DQ=[DQ] /p:TestCycles=[TestCycles] /p:DelayBetweenCycles=[DelayBetweenCycles] /p:IODuration=[IODuration] /p:CSDuration=[CSDuration] /p:VerifierFlags=[VerifierFlags] |
Runs the Connected Standby Stress with Driver Verifier's Concurrency Stress (Logo) test job. |
Note
For command-line help for this test binary, type /h.