SCSI Compliance Fuzz Test (LOGO)
This automated verifies that Fibre Channel or Fibre Channel over Ethernet controllers work properly after a fuzz test.
Test details
Associated requirements |
Device.Storage.Controller.Fc.Interface Device.Storage.Controller.Fcoe.Interface Device.Storage.Controller.Fcoe.Interoperability |
Platforms |
Windows Server 2012 (x64) Windows Server 2012 R2 |
Expected run time |
~300 minutes |
Categories |
Certification Reliability |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Fibre Channel Adapter Testing Prerequisites or Fibre Channel Over Ethernet Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Storage Testing.
Before you run this test, if the test environment is an HBA Boot environment, make sure at least one non-boot LUN is connected to the HBA.
More information
The test sends the fuzzed commands to the device. The commands covered by test are the same as the SCSI Compliance Test 2.0 (LOGO).
Parameters
| Parameter | Description |
|---|---|
DiskDeviceObjLink |
The device object link. |
Command syntax
| Command | Description |
|---|---|
fuzztest.exe /device "[DiskDeviceObjLink]" /scenario fuzz /operation test /seed 123456 /feature common |
Runs the test. |
Note
For command-line help for this test binary, type /h.
File list
| File | Location |
|---|---|
Fuzztest.exe |
<[testbinroot]>\nttest\DRIVERSTEST\storage\wdk\ |
strgenrt.dll |
<[osbinroot]>\SecuTest\SecuTest\ |
SecuScript.dll |
<[osbinroot]>\SecuTest\SecuTest\ |
FieldObjects.dll |
<[osbinroot]>\SecuTest\SecuTest\ |
CoreLib.dll |
<[osbinroot]>\SecuTest\SecuTest\ |