Поделиться через

Audio Logo Test - Certification

  • Статья

This automated test verifies that WaveRT drivers support pull-mode audio-streaming technology by implementing the IMiniportWaveRTStreamNotification interface.

Parameter:

[WDKDeviceID] - set this parameter to device ID when scheduling from Job Explorer for private testing

Please refer to WDK documentation for details about this test!

The following table shows the details for this test.

Test details

Associated requirements

Device.Audio.Base.ReportSupportedProperties Device.Audio.Base.WaveRTConformance Device.Audio.Base.ZeroGlitch

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Audio Device Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Audio Testing.

All test cases return PASS or FAIL. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.

The test should return PASS if the following occur:

  1. Render to all audio endpoints simultaneously is successful.

  2. A nearby associated hardware mute control exists on compressed endpoints

  3. All audio render endpoints successfully render streams in exclusive pull mode.

  4. All audio capture endpoints successfully capture streams in exclusive pull mode.

More information

Command syntax

Command option Description

AudioLogo

Without any options, the test enumerates audio devices.

-c [string]

This option starts the application and runs the test cases that are specified in the .profile file.

-h [string]

This option specifies the Plug and Play (PnP) ID of the device to be tested.

logo_win7_audiologo.pro

This is the .profile file of test cases to be run.

 

Note  

For command-line help for this test binary, type /h

 

File list

File Location

AudioLogo.exe

<testbinroot>\nttest\multimediatest\AVCore\Audio\WDK\

Logo_win7_audiologo.pro

<testbinroot>\nttest\multimediatest\AVCore\Audio\Profiles\

S98wtt_u.dll

<testbinroot>\nttest\multimediatest\common\

 

 

 

Send comments about this topic to Microsoft