Device Bezel Integration

Test name

Test.DeviceBezel.json

Core requirements tested

Device.Digitizer.PrecisionTouchPad.Hardware.Bezel

Test purpose

Verifies that the device is integrated correctly.

Tools required

• PTLogo.exe

• Depth gauge or micrometer (or pre-fabricated 1.5mm thick material)

Validation steps

1. Start Test.DeviceBezel.json.

2. If the digitizer surface is above or more than 1.5mm below the edge of the bezel area surrounding it, manually fail the iteration; otherwise, manually pass the iteration.

   To test height, place the corner of a 1.5mm thick sheet on top of the touchpad. If the touchpad and the sheet are still lower than the bezel, the separation is too great and this test should be marked as a failure.

Common errors

None

Passing

1/1 (100%) iterations must pass in order to complete with passing status.

Related topics

Precision Touchpad Tests

 

 

Send comments about this topic to Microsoft