Поделиться через

OID_DOT11_AUTO_CONFIG_ENABLED (Compact 2013)

  • Статья

3/26/2014

When set, the OID_DOT11_AUTO_CONFIG_ENABLED object identifier (OID) requests that the miniport driver set the value of the Extensible Station (ExtSTA) msDot11AutoConfigEnabled management information base (MIB) object to the specified value.

When queried, this OID requests that the miniport driver return the value of the msDot11AutoConfigEnabled MIB object.

The msDot11AutoConfigEnabled MIB object specifies the current settings for the following automatic configuration modes:

  • Automatic media access control (MAC) configuration
    When automatic MAC configuration is enabled, the 802.11 station manages the configuration of the MAC and can fail set requests that would change MAC related parameters.
  • Automatic PHY configuration
    When automatic PHY configuration is enabled, the 802.11 station manages the configuration of the PHY and can fail set requests that would change PHY related parameters.

The data type for OID_DOT11_AUTO_CONFIG_ENABLED is a ULONG value, with the automatic configuration settings that are defined through the following bitmask:

  • DOT11_PHY_AUTO_CONFIG_ENABLED_FLAG
    If this bit is set, the miniport driver has enabled automatic PHY configuration.
  • DOT11_MAC_AUTO_CONFIG_ENABLED_FLAG
    If this bit is set, the miniport driver has enabled automatic MAC configuration.

The default for the msDot11AutoConfigEnabled MIB object has the following flags set:

  • DOT11_PHY_AUTO_CONFIG_ENABLED_FLAG
  • DOT11_MAC_AUTO_CONFIG_ENABLED_FLAG

The miniport driver must set this MIB object to its default if any of the following occurs:

Requirements

Header

windot11.h

See Also

Reference

Native 802.11 Extensible Station OIDs
MiniportInitializeEx
OID_DOT11_RESET_REQUEST
DOT11_RESET_REQUEST
Native 802.11 Wireless LAN OIDs