RASPPPIP (Windows Embedded CE 6.0)
1/6/2010
This structure contains the result of a PPP IP projection operation.
The RasGetProjectionInfo function returns a RASPPPIP structure when its rasprojection parameter has the value RASP_PppIp.
Syntax
#define RASPPPIPW struct tagRASPPPIPW
RASPPPIPW
{
// Required members
DWORD dwSize;
DWORD dwError;
WCHAR szIpAddress[ RAS_MaxIpAddress + 1 ];
// Optional members
WCHAR szServerIpAddress[ RAS_MaxIpAddress + 1 ];
DWORD dwOptions;
DWORD dwServerOptions;
};
#define RASPPPIP RASPPPIPW
Members
- dwSize
Required. Specifies the size of the structure, in bytes. Before calling the RasGetProjectionInfo function, set this member to indicate the cumulative size of the members of the RASPPPIP structure that you are using. For more information, see the Remarks section.
- dwError
Required. Contains the result of the PPP control protocol negotiation. A value of 0 (zero) indicates success. A nonzero value indicates failure. The value given indicates the particular error that occurred during the control protocol negotiation.
- szIpAddress
Required. Contains a null-terminated string that is the client's IP address on the RAS connection. For example, 11.101.237.71.
- szServerIpAddress
Optional. Contains a null-terminated string that is the server's IP address on the RAS connection. For example, 11.101.237.72.
- dwOptions
Optional. Specifies Internet Protocol Control Protocol (IPCP) options for the local client. The only currently accepted value is RASIPO_VJ, which indicates that IP datagrams sent by the local computer are compressed using Van Jacobson compression.
- dwServerOptions
Optional. Specifies IPCP options for the remote server. The only currently accepted value is RASIPO_VJ, which indicates that IP datagrams sent by the remote computer are compressed using Van Jacobson compression.
Remarks
To retrieve PPP IP information on Windows Embedded CE–based devices, dwSize must specify the size of the RASPPPIP structure that indicates the cumulative size of all members you are using. The dwSize member must at least contain the size of the required members; dwSize, dwError, and szIpAddress. Additionally, dwSize should contain the size of each of the optional members you use; szServerIpAddress, dwOptions, and dwServerOptions.
Requirements
| Header | ras.h |
| Windows Embedded CE | Windows CE 5.0 and later |