LINESPECIALINFO (Compact 2013)
3/26/2014
These bit-flag constants describes special information signals that the network can use to report various reporting and network observation operations. They are special coded tone sequences transmitted at the beginning of network advisory recorded announcements.
The following table shows the LINESPECIALINFO constants.
Value |
Description |
|---|---|
LINESPECIALINFO_CUSTIRREG = 0x00000002 |
This special information tone precedes a vacant number, AIS, Centrex number change and nonworking station, access code not dialed or dialed in error, or manual intercept operator message. These conditions are in the customer irregularity category. LINESPECIALINFO_CUSTIRREG is also reported when billing information is rejected and when the dialed address is blocked at the switch. |
LINESPECIALINFO_NOCIRCUIT = 0x00000001 |
This special information tone precedes a no circuit or an emergency announcement. These announcements are in the trunk blockage category. |
LINESPECIALINFO_REORDER = 0x00000004 |
This special information tone precedes a reorder announcement. This announcement is in the equipment irregularity category.LINESPECIALINFO_REORDER is also reported when the telephone is kept offhook too long. |
LINESPECIALINFO_UNAVAIL = 0x00000010 |
Specifics about the special information tone are unavailable and will not become known. |
LINESPECIALINFO_UNKNOWN = 0x00000008 |
Specifics about the special information tone are currently unknown but may become known later. |
Remarks
The high-order 16 bits can be assigned for device-specific extensions. The low-order 16 bits are reserved.
Special information tones are defined for advisory messages and are not normally used for billing or supervisory purpose.
Requirements
Header |
tapi.h |