NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO (Windows Embedded CE 6.0)

Статья
01/05/2012

1/6/2010

This macro returns the MediaSpecificInformation pointer and the SizeMediaSpecificInfo value from the out-of-band data block associated with a given packet descriptor.

Syntax

VOID NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(
  PNDIS_PACKET _Packet,
  PPVOID _pMediaSpecificInfo,
  PUINT _pSizeMediaSpecificInfo
);

Parameters

_Packet
Points to a packet descriptor.

_pMediaSpecificInfo
Points to a caller supplied variable that this macro sets to the MediaSpecificInformation pointer. The returned address gives the caller access to any buffered out-of-band information, such as packet priority, associated with the specified net packet indicated or to be transmitted.

_pSizeMediaSpecificInfo
Points to a caller-supplied variable that this macro sets to the SizeMediaSpecificInfo value, which specifies the size in bytes of the buffer at MediaSpecificInformation.

Return Value

None.

Remarks

NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO returns a NULL pointer at pMediaSpecificInfo and 0 at pSizeMediaSpecificInfo if there is no media-specific information in the NDIS_PACKET_OOB_DATA block associated with the given packet descriptor.

Depending on the medium, a NIC miniport might set these members with NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO in the out-of-band data blocks associated with the packet descriptors it allocates for receive indications.

Depending on the medium of the underlying driver to which it is bound, a protocol might set MediaSpecificInformation and SizeMediaSpecificInfo in the out-of-band blocks associated with the packet descriptors it allocates for sends.

In either case, while a higher-level protocol is consuming a receive indication or a lower-level miniport is processing a send, that driver must have exclusive access to the buffer at MediaSpecificInformation. This restriction implies the following:

A miniport cannot access the buffer it set up with media-specific information when NdisMIndicateReceivePacket returns control if NDIS_STATUS_PENDING is set in the Status member of the associated out-of-band block. The driver can use NDIS_GET_PACKET_STATUS to determine whether each packet in the packet array it just indicated has this status set or has been returned with NDIS_STATUS_SUCCESS.
A protocol driver cannot access the media-specific information buffer it set up for a send, nor anything else in the out-of-band data block associated with a packet descriptor it passes to NdisSendPackets or NdisSend, until the packet descriptor is returned to its ProtocolSendComplete function.
Because NDIS queues send packets and resubmits them if the MiniportSend function returns NDIS_STATUS_RESOURCES or if the MiniportSendPackets function sets NDIS_STATUS_RESOURCES for the Status of a packet in a submitted array, the final status of each packet in a send array is volatile until that packet has been returned to ProtocolSendComplete.

A protocol driver can call NdisGetReceivedPacket followed by NDIS_GET_ORIGINAL_PACKET to obtain this information from the NDIS_PACKET_OOB_DATA block associated with a packet descriptor when its ProtocolReceive function is given an indication. However, these calls are superfluous if the protocol is bound to an underlying driver that does not supply out-of-band information with its indications.

The NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO macro is defined as follows.

#define NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(_Packet,                    \
                                            _pMediaSpecificInfo,        \
                                            _pSizeMediaSpecificInfo)    \
{                                                                       \
    if (!((_Packet)->Private.NdisPacketFlags & fPACKET_ALLOCATED_BY_NDIS) ||\
        !((_Packet)->Private.NdisPacketFlags & fPACKET_CONTAINS_MEDIA_SPECIFIC_INFO))\
    {                                                                   \
        *(_pMediaSpecificInfo) = NULL;                                  \
        *(_pSizeMediaSpecificInfo) = 0;                                 \
    }                                                                   \
    else                                                                \
    {                                                                   \
        *(_pMediaSpecificInfo) =((PNDIS_PACKET_OOB_DATA)((PUCHAR)(_Packet) +\
                    (_Packet)->Private.NdisPacketOobOffset))->MediaSpecificInformation;\
        *(_pSizeMediaSpecificInfo) = ((PNDIS_PACKET_OOB_DATA)((PUCHAR)(_Packet) +\
                    (_Packet)->Private.NdisPacketOobOffset))->SizeMediaSpecificInfo;\
    }                                                                   \
}

Requirements

Header	ndis.h
Windows Embedded CE	Windows CE .NET 4.0 and later

Поделиться через

NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO (Windows Embedded CE 6.0)

Syntax

Parameters

Return Value

Remarks

Requirements

See Also

Reference

Дополнительные ресурсы