Поделиться через


AMD G-Series Development Kit (Compact 2013)

10/16/2014

Windows Embedded Compact 2013 includes a board support package (BSP) for the AMD DB-FT1 Development Board, which uses an AMD G-Series processor and an A55E controller hub. When you install Platform Builder for Windows Embedded Compact 2013 with support for x86 processors, Platform Builder creates the following folder: %_WINCEROOT%\Platform\GSeries

This folder contains the Platform.bib file and other configuration files, the catalog items for the BSP, and source code for the boot loader, drivers, kernel independent transport layer (KITL), and OEM adaptation layer (OAL).

Supported Features

The following table lists the features available in the DB-FT1 Development Board BSP. For more information about the hardware and software limitations for this platform, see the release notes that came with the development kit.

Hardware component

Specifications

BSP support

General

Processor

Supports AMD Embedded G-Series processors up to 18W

Yes

Controller Hub

Revision B board comes with AMD A45 controller hub

Revision C board comes with AMD A55E controller hub

Controller hub integrated clockgen

Yes

Memory Device

Two UDIMM DDR3 UDIMMs, single-channel, non-ECC

Supports up to DDR3-1333

Yes

Board Design

Mini-ITX PCB, 6-layer

AMD Embedded Probe Header

Yes

Included Software

Platform specific BIOS implementation

Diagnostics and development tools

Yes

Audio/Video Support

Graphics Driver

AMD Embedded G-Series HD6xx graphics driver

Yes

Display Interfaces

VGA connector

DVI-D connector

18-bit single-channel LVDS support

Yes

Audio Driver

Realtek HD audio codec ALC269

Yes

Audio Interfaces

Three 1/8" phono audio jacks (2-ch amplified out, line in, microphone)

Communication Interfaces

Super input/output (SIO)

Fintek F81865-I SIO

USB

4 input/output ports

4 internal ports

Yes

Serial ports

2 DB9 (RS232/RS422/RS485)

2 internal ports

Yes

LAN

Realtek 8111DL PCIe GbEx1 LAN controller

1 Ethernet port (RJ-45)

Yes

Expansion

PCI

1 PCI slot (33MHz/32-bit)

1 PCIe x1 slot

Yes

Storage

4 SATA 3Gbps ports (with RAID 0/1/5/10 when used with A55E controller hub)

Yes

Power

Connector

ATX Power Input

Yes

Fan Control

Automated fan control (CPU TSI support)

Yes

Battery

4100 mAh single-cell Lithium-Ion battery

Note

There is a difference between TI/ARM and x86 systems during start-up. On TI/ARM processor the FTP server is loaded during boot-up but on x86 the FTP server is not. In TI_3730 and TI_4470 the FTP server can be started directly by ftp://<ipaddress>. On x86 targets, the user must fire IOCTL to start the FTP server.

See Also

Reference

x86 Microprocessor BSPs