REMOTE_NDIS_HALT_MSG
This message is sent by the host to terminate the network connection. Unlike the other host-initiated control messages, the device does not respond to REMOTE_NDIS_HALT_MSG.
| Offset | Size | Field | Description |
|---|---|---|---|
0 |
4 |
MessageType |
Specifies the type of message being sent. Set to 0x00000003. |
4 |
4 |
MessageLength |
Specifies in bytes the total length of this message from the beginning of the message. |
8 |
4 |
RequestId |
Specifies the Remote NDIS message ID value. This value is used to match messages sent by the host with device responses. |
Remarks
It is optional for the device to implement REMOTE_NDIS_HALT_MSG. If implemented, the device sends this message to the host through the control channel only when the device is in a state initialized by Remote NDIS. The device must terminate all communication immediately after sending this message. Sending this message causes the device to enter a state not initialized by Remote NDIS.
All outstanding requests and packets should be discarded on receipt of this message.
Requirements
Version |
Available in Microsoft Windows XP and later versions of the Windows operating systems. Also available in Windows 2000 as redistributable binaries. |
Header |
Rndis.h (include Rndis.h) |