Как обменяться сообщениями в очереди с конечными точками WCF

Статья
02/28/2011

Очереди обеспечивают возможность надежного обмена сообщениями между клиентом и службой Windows Communication Foundation (WCF), даже если служба недоступна в процессе взаимодействия. В процедурах ниже показана методика обеспечения устойчивого взаимодействия между клиентом и службой за счет использования стандартной поставленной в очередь привязки при реализации службы WCF.

В этом разделе объясняется, как использовать класс NetMsmqBinding для взаимодействия с использованием очередей между клиентом WCF и службой WCF.

Использование очередей в службе WCF.

Определите контракт службы с использованием интерфейса, отмеченного атрибутом ServiceContractAttribute. Пометьте операции в интерфейсе, которые являются частью контракта службы с OperationContractAttribute и задайте их как односторонние, так как методу ответ не возвращается. Следующий код представляет пример контракта службы и определение его операций.
```
<ServiceContract(Namespace:="http://Microsoft.ServiceModel.Samples")> _
Public Interface IOrderProcessor
    <OperationContract(IsOneWay := True)> _
    Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder)
End Interface
```
```
[ServiceContract(Namespace="http://Microsoft.ServiceModel.Samples")]
public interface IOrderProcessor
{
    [OperationContract(IsOneWay = true)]
    void SubmitPurchaseOrder(PurchaseOrder po);
}
```

Необходимо определить контракты данных для определяемых пользователем типов, если их передает контракт службы. В следующем коде показано два контракта данных — PurchaseOrder и PurchaseOrderLineItem. Эти два типа определяют данные, отправляемые службе. (Обратите внимание, что классы, определяющие этот контракт данных, определяют и число методов. Эти методы не являются частью контракта данных. Частью контракта данных являются только члены, объявленные с атрибутом DataMember.)

<DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
Public Class PurchaseOrder
    Private Shared ReadOnly OrderStates() As String = { "Pending", "Processed", "Shipped" }
    Private Shared statusIndexer As New Random(137)

    <DataMember> _
    Public PONumber As String

    <DataMember> _
    Public CustomerId As String

    <DataMember> _
    Public orderLineItems() As PurchaseOrderLineItem

    Public ReadOnly Property TotalCost() As Single
        Get
            Dim totalCost_Renamed As Single = 0
            For Each lineItem In orderLineItems
                totalCost_Renamed += lineItem.TotalCost
            Next lineItem
            Return totalCost_Renamed
        End Get
    End Property

    Public ReadOnly Property Status() As String
        Get
            Return OrderStates(statusIndexer.Next(3))
        End Get
    End Property

    Public Overrides Function ToString() As String
        Dim strbuf As New System.Text.StringBuilder("Purchase Order: " & PONumber & Constants.vbLf)
        strbuf.Append(Constants.vbTab & "Customer: " & CustomerId & Constants.vbLf)
        strbuf.Append(Constants.vbTab & "OrderDetails" & Constants.vbLf)

        For Each lineItem In orderLineItems
            strbuf.Append(Constants.vbTab + Constants.vbTab + lineItem.ToString())
        Next lineItem

        strbuf.Append(Constants.vbTab & "Total cost of this order: $" & TotalCost + Constants.vbLf)
        strbuf.Append(Constants.vbTab & "Order status: " & Status + Constants.vbLf)
        Return strbuf.ToString()
    End Function
End Class

[DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
public class PurchaseOrder
{
    static readonly string[] OrderStates = { "Pending", "Processed", "Shipped" };
    static Random statusIndexer = new Random(137);

    [DataMember]
    public string PONumber;

    [DataMember]
    public string CustomerId;

    [DataMember]
    public PurchaseOrderLineItem[] orderLineItems;

    public float TotalCost
    {
        get
        {
            float totalCost = 0;
            foreach (PurchaseOrderLineItem lineItem in orderLineItems)
                totalCost += lineItem.TotalCost;
            return totalCost;
        }
    }

    public string Status
    {
        get 
        {
            return OrderStates[statusIndexer.Next(3)];
        }
    }

    public override string ToString()
    {
        System.Text.StringBuilder strbuf = new System.Text.StringBuilder("Purchase Order: " + PONumber + "\n");
        strbuf.Append("\tCustomer: " + CustomerId + "\n");
        strbuf.Append("\tOrderDetails\n");

        foreach (PurchaseOrderLineItem lineItem in orderLineItems)
        {
            strbuf.Append("\t\t" + lineItem.ToString());
        }

        strbuf.Append("\tTotal cost of this order: $" + TotalCost + "\n");
        strbuf.Append("\tOrder status: " + Status + "\n");
        return strbuf.ToString();
    }
}

Реализуйте методы контракта службы, определенные в интерфейсе в классе.

Public Class OrderProcessorService
    Implements IOrderProcessor
    <OperationBehavior(TransactionScopeRequired := True, TransactionAutoComplete := True)> _
    Public Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder) Implements IOrderProcessor.SubmitPurchaseOrder
        Orders.Add(po)
        Console.WriteLine("Processing {0} ", po)
    End Sub
End Class

public class OrderProcessorService : IOrderProcessor
{
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    public void SubmitPurchaseOrder(PurchaseOrder po)
    {
        Orders.Add(po);
        Console.WriteLine("Processing {0} ", po);
    }
}

Заметьте, что в методе SubmitPurchaseOrder указывается атрибут OperationBehaviorAttribute. Это значит, что данная операция должна вызываться в рамках транзакции, которая автоматически завершается при завершении метода.

Создайте очередь транзакций с использованием System.Messaging. Вместо этого можно создать очередь с использованием консоли управления (MMC) «Очередь сообщений Майкрософт (MSMQ)». В этом случае убедитесь, что создается очередь транзакций.
```
' Create the transacted MSMQ queue if necessary.
If (Not MessageQueue.Exists(queueName)) Then
    MessageQueue.Create(queueName, True)
End If
```
```
// Create the transacted MSMQ queue if necessary.
if (!MessageQueue.Exists(queueName))
    MessageQueue.Create(queueName, true);
```

Определите класс ServiceEndpoint в конфигурации, который задает адрес службы и использует стандартную привязку NetMsmqBinding. Дополнительные сведения по использованию конфигурации WCF, см. в разделе Configuring Windows Communication Foundation Applications.

<services>
  <service 
      name="Microsoft.ServiceModel.Samples.OrderProcessorService"
      behaviorConfiguration="CalculatorServiceBehavior">
    <host>
      <baseAddresses>
        <add baseAddress="https://localhost:8000/ServiceModelSamples/service"/>
      </baseAddresses>
    </host>
    <!-- Define NetMsmqEndpoint -->
    <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted"
              binding="netMsmqBinding"
              contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
    <!-- the mex endpoint is exposed at https://localhost:8000/ServiceModelSamples/service/mex -->
    <endpoint address="mex"
              binding="mexHttpBinding"
              contract="IMetadataExchange" />
  </service>
</services>

Создайте узел для службы OrderProcessing с использованием ServiceHost, считывающий и обрабатывающий сообщения из очереди. Откройте узел службы для обеспечения доступности службы. Выведите для пользователя сообщение о том, что нужно нажать любую клавишу для завершения службы. Вызовите метод ReadLine, чтобы включить ожидания нажатия клавиши, а затем закройте службу.

' Create a ServiceHost for the OrderProcessorService type.
Using serviceHost As New ServiceHost(GetType(OrderProcessorService))
    ' Open the ServiceHost to create listeners and start listening for messages.
    serviceHost.Open()

    ' The service can now be accessed.
    Console.WriteLine("The service is ready.")
    Console.WriteLine("Press <ENTER> to terminate service.")
    Console.WriteLine()
    Console.ReadLine()

    ' Close the ServiceHostB to shutdown the service.
    serviceHost.Close()
End Using

// Create a ServiceHost for the OrderProcessorService type.
using (ServiceHost serviceHost = new ServiceHost(typeof(OrderProcessorService)))
{
    // Open the ServiceHost to create listeners and start listening for messages.
    serviceHost.Open();

    // The service can now be accessed.
    Console.WriteLine("The service is ready.");
    Console.WriteLine("Press <ENTER> to terminate service.");
    Console.WriteLine();
    Console.ReadLine();

    // Close the ServiceHostB to shutdown the service.
    serviceHost.Close();
}

Создание клиента для службы в очереди

В следующем примере показано, как запустить ведущее приложение и использовать программу Svcutil.exe для создания клиента WCF.
```
svcutil https://localhost:8000/ServiceModelSamples/service
```
Определите объект ServiceEndpoint в конфигурации, которая указывает адрес и использует стандартную привязку NetMsmqBinding, как показано в следующем примере.
```
<client>
  
  <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted" 
            binding="netMsmqBinding" 
            contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
</client>
```

Создайте область транзакции для записи в очередь транзакций, вызовите операцию SubmitPurchaseOrder и закройте клиент WCF, как показано в следующем примере.

'Create a transaction scope.
Using scope As New TransactionScope(TransactionScopeOption.Required)
    ' Make a queued call to submit the purchase order.
    client.SubmitPurchaseOrder(po)
    ' Complete the transaction.
    scope.Complete()
End Using

'Closing the client gracefully closes the connection and cleans up resources.
client.Close()

//Create a transaction scope.
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required))
{
    // Make a queued call to submit the purchase order.
    client.SubmitPurchaseOrder(po);
    // Complete the transaction.
    scope.Complete();
}

//Closing the client gracefully closes the connection and cleans up resources.
client.Close();

Пример

В следующих примерах показан код службы, ведущее приложение, файл App.config и код клиента для этого примера.

' This is the service code
'  Copyright (c) Microsoft Corporation.  All Rights Reserved.

Imports System
Imports System.ServiceModel.Channels
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions
Imports System.Runtime.Serialization
Imports System.Collections.Generic

Namespace Microsoft.ServiceModel.Samples
    ' Define the purchase order line item.
    <DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
    Public Class PurchaseOrderLineItem
        <DataMember> _
        Public ProductId As String

        <DataMember> _
        Public UnitCost As Single

        <DataMember> _
        Public Quantity As Integer

        Public Overrides Function ToString() As String
            Dim displayString As String = "Order LineItem: " & Quantity & " of " & ProductId & " @unit price: $" & UnitCost + Constants.vbLf
            Return displayString
        End Function

        Public ReadOnly Property TotalCost() As Single
            Get
                Return UnitCost * Quantity
            End Get
        End Property
    End Class

    ' Define the purchase order.
    <DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
    Public Class PurchaseOrder
        Private Shared ReadOnly OrderStates() As String = { "Pending", "Processed", "Shipped" }
        Private Shared statusIndexer As New Random(137)

        <DataMember> _
        Public PONumber As String

        <DataMember> _
        Public CustomerId As String

        <DataMember> _
        Public orderLineItems() As PurchaseOrderLineItem

        Public ReadOnly Property TotalCost() As Single
            Get
                Dim totalCost_Renamed As Single = 0
                For Each lineItem In orderLineItems
                    totalCost_Renamed += lineItem.TotalCost
                Next lineItem
                Return totalCost_Renamed
            End Get
        End Property

        Public ReadOnly Property Status() As String
            Get
                Return OrderStates(statusIndexer.Next(3))
            End Get
        End Property

        Public Overrides Function ToString() As String
            Dim strbuf As New System.Text.StringBuilder("Purchase Order: " & PONumber & Constants.vbLf)
            strbuf.Append(Constants.vbTab & "Customer: " & CustomerId & Constants.vbLf)
            strbuf.Append(Constants.vbTab & "OrderDetails" & Constants.vbLf)

            For Each lineItem In orderLineItems
                strbuf.Append(Constants.vbTab + Constants.vbTab + lineItem.ToString())
            Next lineItem

            strbuf.Append(Constants.vbTab & "Total cost of this order: $" & TotalCost + Constants.vbLf)
            strbuf.Append(Constants.vbTab & "Order status: " & Status + Constants.vbLf)
            Return strbuf.ToString()
        End Function
    End Class

    ' Order Processing Logic
    ' Can replace with transaction-aware resource such as SQL or transacted hashtable to hold the purchase orders.
    ' This example uses a non-transactional resource.
    Public Class Orders
        Private Shared purchaseOrders As New Dictionary(Of String, PurchaseOrder)()

        Public Shared Sub Add(ByVal po As PurchaseOrder)
            purchaseOrders.Add(po.PONumber, po)
        End Sub

        Public Shared Function GetOrderStatus(ByVal poNumber As String) As String
            Dim po As PurchaseOrder = Nothing
            If purchaseOrders.TryGetValue(poNumber, po) Then
                Return po.Status
            Else
                Return Nothing
            End If
        End Function

        Public Shared Sub DeleteOrder(ByVal poNumber As String)
            If purchaseOrders(poNumber) IsNot Nothing Then
                purchaseOrders.Remove(poNumber)
            End If
        End Sub
    End Class

    ' Define a service contract. 
    <ServiceContract(Namespace:="http://Microsoft.ServiceModel.Samples")> _
    Public Interface IOrderProcessor
        <OperationContract(IsOneWay := True)> _
        Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder)
    End Interface

    ' Service class that implements the service contract.
    ' Added code to write output to the console window.
    Public Class OrderProcessorService
        Implements IOrderProcessor
        <OperationBehavior(TransactionScopeRequired := True, TransactionAutoComplete := True)> _
        Public Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder) Implements IOrderProcessor.SubmitPurchaseOrder
            Orders.Add(po)
            Console.WriteLine("Processing {0} ", po)
        End Sub
    End Class
End Namespace

// This is the service code
//  Copyright (c) Microsoft Corporation.  All Rights Reserved.

using System;
using System.ServiceModel.Channels;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;
using System.Runtime.Serialization;
using System.Collections.Generic;

namespace Microsoft.ServiceModel.Samples
{
    // Define the purchase order line item.
    [DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
    public class PurchaseOrderLineItem
    {
        [DataMember]
        public string ProductId;

        [DataMember]
        public float UnitCost;

        [DataMember]
        public int Quantity;

        public override string ToString()
        {
            String displayString = "Order LineItem: " + Quantity + " of "  + ProductId + " @unit price: $" + UnitCost + "\n";
            return displayString;
        }

        public float TotalCost
        {
            get { return UnitCost * Quantity; }
        }
    }

    // Define the purchase order.
    [DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
    public class PurchaseOrder
    {
        static readonly string[] OrderStates = { "Pending", "Processed", "Shipped" };
        static Random statusIndexer = new Random(137);

        [DataMember]
        public string PONumber;

        [DataMember]
        public string CustomerId;

        [DataMember]
        public PurchaseOrderLineItem[] orderLineItems;

        public float TotalCost
        {
            get
            {
                float totalCost = 0;
                foreach (PurchaseOrderLineItem lineItem in orderLineItems)
                    totalCost += lineItem.TotalCost;
                return totalCost;
            }
        }

        public string Status
        {
            get 
            {
                return OrderStates[statusIndexer.Next(3)];
            }
        }

        public override string ToString()
        {
            System.Text.StringBuilder strbuf = new System.Text.StringBuilder("Purchase Order: " + PONumber + "\n");
            strbuf.Append("\tCustomer: " + CustomerId + "\n");
            strbuf.Append("\tOrderDetails\n");

            foreach (PurchaseOrderLineItem lineItem in orderLineItems)
            {
                strbuf.Append("\t\t" + lineItem.ToString());
            }

            strbuf.Append("\tTotal cost of this order: $" + TotalCost + "\n");
            strbuf.Append("\tOrder status: " + Status + "\n");
            return strbuf.ToString();
        }
    }

    // Order Processing Logic
    // Can replace with transaction-aware resource such as SQL or transacted hashtable to hold the purchase orders.
    // This example uses a non-transactional resource.
    public class Orders
    {
        static Dictionary<string, PurchaseOrder> purchaseOrders = new Dictionary<string, PurchaseOrder>();

        public static void Add(PurchaseOrder po)
        {
            purchaseOrders.Add(po.PONumber, po);
        }

        public static string GetOrderStatus(string poNumber)
        {
            PurchaseOrder po;
            if (purchaseOrders.TryGetValue(poNumber, out po))
                return po.Status;
            else
                return null;
        }

        public static void DeleteOrder(string poNumber)
        {
            if(purchaseOrders[poNumber] != null)
                purchaseOrders.Remove(poNumber);
        }
    }

    // Define a service contract. 
    [ServiceContract(Namespace="http://Microsoft.ServiceModel.Samples")]
    public interface IOrderProcessor
    {
        [OperationContract(IsOneWay = true)]
        void SubmitPurchaseOrder(PurchaseOrder po);
    }

    // Service class that implements the service contract.
    // Added code to write output to the console window.
    public class OrderProcessorService : IOrderProcessor
    {
        [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
        public void SubmitPurchaseOrder(PurchaseOrder po)
        {
            Orders.Add(po);
            Console.WriteLine("Processing {0} ", po);
        }
    }
}

' This is the hosting application.

Imports System
Imports System.ServiceModel.Channels
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions
Imports System.Runtime.Serialization
Imports System.Collections.Generic

Namespace Microsoft.ServiceModel.Samples
    Friend Class hostApp
        ' Host the service within this EXE console application.
        Public Shared Sub Main()
            ' Get MSMQ queue name from appsettings in configuration.
            Dim queueName As String = ConfigurationManager.AppSettings("queueName")

            ' Create the transacted MSMQ queue if necessary.
            If (Not MessageQueue.Exists(queueName)) Then
                MessageQueue.Create(queueName, True)
            End If

            ' Create a ServiceHost for the OrderProcessorService type.
            Using serviceHost As New ServiceHost(GetType(OrderProcessorService))
                ' Open the ServiceHost to create listeners and start listening for messages.
                serviceHost.Open()

                ' The service can now be accessed.
                Console.WriteLine("The service is ready.")
                Console.WriteLine("Press <ENTER> to terminate service.")
                Console.WriteLine()
                Console.ReadLine()

                ' Close the ServiceHostB to shutdown the service.
                serviceHost.Close()
            End Using
        End Sub
    End Class
End Namespace

// This is the hosting application.

using System;
using System.ServiceModel.Channels;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;
using System.Runtime.Serialization;
using System.Collections.Generic;

namespace Microsoft.ServiceModel.Samples
{
    class hostApp
    {
        // Host the service within this EXE console application.
        public static void Main()
        {
            // Get MSMQ queue name from appsettings in configuration.
            string queueName = ConfigurationManager.AppSettings["queueName"];

            // Create the transacted MSMQ queue if necessary.
            if (!MessageQueue.Exists(queueName))
                MessageQueue.Create(queueName, true);

            // Create a ServiceHost for the OrderProcessorService type.
            using (ServiceHost serviceHost = new ServiceHost(typeof(OrderProcessorService)))
            {
                // Open the ServiceHost to create listeners and start listening for messages.
                serviceHost.Open();

                // The service can now be accessed.
                Console.WriteLine("The service is ready.");
                Console.WriteLine("Press <ENTER> to terminate service.");
                Console.WriteLine();
                Console.ReadLine();

                // Close the ServiceHostB to shutdown the service.
                serviceHost.Close();
            }
        }
    }
}

<!-- This is the app.config for the service -->
<configuration>

  <appSettings>
    <!-- use appSetting to configure MSMQ queue name -->
    <add key="queueName" value=".\private$\ServiceModelSamplesTransacted" />
  </appSettings>

  <system.serviceModel>
    <services>
      <service 
          name="Microsoft.ServiceModel.Samples.OrderProcessorService"
          behaviorConfiguration="CalculatorServiceBehavior">
        <host>
          <baseAddresses>
            <add baseAddress="https://localhost:8000/ServiceModelSamples/service"/>
          </baseAddresses>
        </host>
        <!-- Define NetMsmqEndpoint -->
        <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted"
                  binding="netMsmqBinding"
                  contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
        <!-- the mex endpoint is exposed at https://localhost:8000/ServiceModelSamples/service/mex -->
        <endpoint address="mex"
                  binding="mexHttpBinding"
                  contract="IMetadataExchange" />
      </service>
    </services>
    
    <behaviors>
      <serviceBehaviors>
        <behavior name="CalculatorServiceBehavior">
          <serviceMetadata httpGetEnabled="True"/>
        </behavior>
      </serviceBehaviors>
    </behaviors>

  </system.serviceModel>

</configuration>

' This is the client code.
'  Copyright (c) Microsoft Corporation.  All Rights Reserved.

Imports System
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions

Namespace Microsoft.ServiceModel.Samples
    'The service contract is defined in generatedClient.cs, generated from the service by the svcutil tool.

    'Client implementation code.
    Friend Class Client
        Shared Sub Main()
            ' Create a client.
            Dim client As New OrderProcessorClient()

            ' Create the purchase order.
            Dim po As New PurchaseOrder()
            po.CustomerId = "somecustomer.com"
            po.PONumber = Guid.NewGuid().ToString()

            Dim lineItem1 As New PurchaseOrderLineItem()
            lineItem1.ProductId = "Blue Widget"
            lineItem1.Quantity = 54
            lineItem1.UnitCost = 29.99F

            Dim lineItem2 As New PurchaseOrderLineItem()
            lineItem2.ProductId = "Red Widget"
            lineItem2.Quantity = 890
            lineItem2.UnitCost = 45.89F

            po.orderLineItems = New PurchaseOrderLineItem(1){}
            po.orderLineItems(0) = lineItem1
            po.orderLineItems(1) = lineItem2

            'Create a transaction scope.
            Using scope As New TransactionScope(TransactionScopeOption.Required)
                ' Make a queued call to submit the purchase order.
                client.SubmitPurchaseOrder(po)
                ' Complete the transaction.
                scope.Complete()
            End Using

            'Closing the client gracefully closes the connection and cleans up resources.
            client.Close()

            Console.WriteLine()
            Console.WriteLine("Press <ENTER> to terminate client.")
            Console.ReadLine()
        End Sub
    End Class
End Namespace

// This is the client code.
//  Copyright (c) Microsoft Corporation.  All Rights Reserved.

using System;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;

namespace Microsoft.ServiceModel.Samples
{
    //The service contract is defined in generatedClient.cs, generated from the service by the svcutil tool.

    //Client implementation code.
    class Client
    {
        static void Main()
        {
            // Create a client.
            OrderProcessorClient client = new OrderProcessorClient();

            // Create the purchase order.
            PurchaseOrder po = new PurchaseOrder();
            po.CustomerId = "somecustomer.com";
            po.PONumber = Guid.NewGuid().ToString();

            PurchaseOrderLineItem lineItem1 = new PurchaseOrderLineItem();
            lineItem1.ProductId = "Blue Widget";
            lineItem1.Quantity = 54;
            lineItem1.UnitCost = 29.99F;

            PurchaseOrderLineItem lineItem2 = new PurchaseOrderLineItem();
            lineItem2.ProductId = "Red Widget";
            lineItem2.Quantity = 890;
            lineItem2.UnitCost = 45.89F;

            po.orderLineItems = new PurchaseOrderLineItem[2];
            po.orderLineItems[0] = lineItem1;
            po.orderLineItems[1] = lineItem2;

            //Create a transaction scope.
            using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required))
            {
                // Make a queued call to submit the purchase order.
                client.SubmitPurchaseOrder(po);
                // Complete the transaction.
                scope.Complete();
            }

            //Closing the client gracefully closes the connection and cleans up resources.
            client.Close();

            Console.WriteLine();
            Console.WriteLine("Press <ENTER> to terminate client.");
            Console.ReadLine();
        }
    }
}

<!-- This is the app.config for the client app -->
<configuration>
  <system.serviceModel>
    <client>
      <!-- Define NetMsmqEndpoint -->
      <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted" 
                binding="netMsmqBinding" 
                contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
    </client>
  </system.serviceModel>
</configuration>

См. также

Поделиться через

Как обменяться сообщениями в очереди с конечными точками WCF

Использование очередей в службе WCF.

Создание клиента для службы в очереди

Пример

См. также

Задачи

Справочник

Основные понятия

Другие ресурсы

Дополнительные ресурсы