Поделиться через

How to Configure Static Routes

  • Статья

Follow these steps on each Web server to configure static routes for the private network adapters.

To configure static routes on Windows Server 2003

  1. On the desktop, right-click My Network Places, and then click Properties.

  2. In the Network and Dial-up Properties window, right-click <adapter name>, and then click Properties.

  3. In the <adapter name> Properties dialog box, in the Components checked are used by this connection section, click Internet Protocol (TCP/IP), and then click Properties.

  4. In the Internet Protocol (TCP/IP) Properties dialog box, click Advanced.

  5. In the Advanced TCP/IP Settings dialog box, on the IP Settings tab, in the Default gateways section, click Add.

  6. In the TCP/IP Gateway Address dialog box, in the Gateway box, type the IP address of the default gateway or router interface, and then click Add.

  7. Repeat steps 5 and 6 for each additional router interface (if applicable).

  8. In the Advanced TCP/IP Settings dialog box, click OK.

  9. In the Internet Protocol (TCP/IP) Properties dialog box, click OK.

  10. In the <adapter name> Properties dialog box, click OK.

  11. Restart the server.

To configure static routes on Windows Server 2008

  1. On the desktop, right-click Network, and then click Properties.

  2. In the Network and Sharing Center window, click Manage network connections.

  3. Right-click <adapter name>, and then click Properties.

  4. In the <adapter name> Properties dialog box, in the This connection uses the following items section, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), as required, and then click Properties.

  5. In the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) dialog box, click Advanced.

  6. In the Advanced TCP/IP Settings dialog box, on the IP Settings tab, in the Default gateways section, click Add.

  7. In the TCP/IP Gateway Address dialog box, in the TCP/IP Gateway Address box, type the IP address of the default gateway or router interface, and then click Add.

  8. Repeat steps 6 and 7 for each additional router interface (if applicable).

  9. In the Advanced TCP/IP Settings dialog box, click OK.

  10. In the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6)Properties dialog box, click OK.

  11. In the <adapter name> Properties dialog box, click OK.

  12. Restart the server.

See Also

Other Resources

Building the Web Tier

Building an Enterprise Deployment

Deployment

Configuring the Web Servers