Troubleshoot outbound connections

In this article, you learn how to use the connection troubleshoot feature of Azure Network Watcher to diagnose and troubleshoot connectivity issues. For more information about connection troubleshoot, see Connection troubleshoot overview.

Prerequisites

Portal

• An Azure account with an active subscription. Create an account for free.

• Network Watcher enabled in the region of the virtual machine (VM) you want to troubleshoot. By default, Azure enables Network Watcher in a region when you create a virtual network in it. For more information, see Enable or disable Azure Network Watcher.

• A virtual machine with Network Watcher agent VM extension installed on it and has the following outbound TCP connectivity:

  • to 169.254.169.254 over port 80
  • to 168.63.129.16 over port 8037

• A second virtual machine with inbound TCP connectivity from 168.63.129.16 over the port being tested (for Port scanner diagnostic test).

PowerShell

• An Azure account with an active subscription. Create an account for free.

• Network Watcher enabled in the region of the virtual machine (VM) you want to troubleshoot. By default, Azure enables Network Watcher in a region when you create a virtual network in it. For more information, see Enable or disable Azure Network Watcher.

• A virtual machine with Network Watcher agent VM extension installed on it and has the following outbound TCP connectivity:

  • to 169.254.169.254 over port 80
  • to 168.63.129.16 over port 8037

• A second virtual machine with inbound TCP connectivity from 168.63.129.16 over the port being tested (for Port scanner diagnostic test).

• Azure Cloud Shell or Azure PowerShell.

  The steps in this article run the Azure PowerShell cmdlets interactively in Azure Cloud Shell. To run the cmdlets in the Cloud Shell, select Open Cloud Shell at the upper-right corner of a code block. Select Copy to copy the code and then paste it into Cloud Shell to run it. You can also run the Cloud Shell from within the Azure portal.

  You can also install Azure PowerShell locally to run the cmdlets. This article requires the Az PowerShell module. For more information, see How to install Azure PowerShell. If you run PowerShell locally, sign in to Azure using the Connect-AzAccount cmdlet.

Azure CLI

• An Azure account with an active subscription. Create an account for free.

• Network Watcher enabled in the region of the virtual machine (VM) you want to troubleshoot. By default, Azure enables Network Watcher in a region when you create a virtual network in it. For more information, see Enable or disable Azure Network Watcher.

• A virtual machine with Network Watcher agent VM extension installed on it and has the following outbound TCP connectivity:

  • to 169.254.169.254 over port 80
  • to 168.63.129.16 over port 8037

• A second virtual machine with inbound TCP connectivity from 168.63.129.16 over the port being tested (for Port scanner diagnostic test).

• Azure Cloud Shell or Azure CLI.

  The steps in this article run the Azure CLI commands interactively in Azure Cloud Shell. To run the commands in the Cloud Shell, select Open Cloud Shell at the upper-right corner of a code block. Select Copy to copy the code, and paste it into Cloud Shell to run it. You can also run the Cloud Shell from within the Azure portal.

  You can also install Azure CLI locally to run the commands. If you run Azure CLI locally, sign in to Azure using the az login command.

Note

The Network Watcher agent VM extension is required on the source virtual machine to run the connection troubleshoot connectivity test. The extension is automatically installed on the virtual machine when using the Azure portal. If you don't have the extension installed, you can install it manually:

• To install the extension on a Windows virtual machine, see Network Watcher agent VM extension for Windows.
• To install the extension on a Linux virtual machine, see Network Watcher agent VM extension for Linux.
• To update an already installed extension, see Update Network Watcher agent VM extension to the latest version.

Test connectivity to a virtual machine

In this section, you test the remote desktop port (RDP) connectivity from one virtual machine to another virtual machine in the same virtual network.

Portal

1. Sign in to the Azure portal.

2. In the search box at the top of the portal, enter network watcher. Select Network Watcher from the search results.

   

3. Under Network diagnostic tools, select Connection troubleshoot. Enter or select the following values:

   Setting	Value
   Source
   Source type	Select Virtual machine.
   Virtual machine	Select the virtual machine that you want to troubleshoot the connection from.
   Destination
   Destination type	Select Select a virtual machine.
   Virtual machine	Select the destination virtual machine.
   Probe Settings
   Preferred IP version	Select IPv4. The other available options are: Both and IPv6.
   Protocol	Select TCP. The other available option is: ICMP.
   Destination port	Enter 3389. Port 3389 is the default port for RDP.
   Source port	Leave blank or enter a source port number that you want to test.
   Connection Diagnostic
   Diagnostics tests	Select Connectivity, NSG diagnostic, Next hop, and Port scanner.

   

4. Select Run diagnostic tests.

   • If the two virtual machines are communicating with no issues, you see the following results:

     

     • 66 probes were successfully sent to the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is allowed. Select See details to see the security rules that are allowing the outbound communication from the source virtual machine.
     • Inbound connectivity to the destination virtual machine is allowed. Select See details to see the security rules that are allowing the inbound communication to the destination virtual machine.
     • Azure default system route is used to route traffic between the two virtual machines (Route table ID: System route).
     • Port 3389 is reachable on the destination virtual machine.

   • If the destination virtual machine has a network security group that's denying incoming RDP connections, you see the following results:

     

     • 30 probes were sent and failed to reach the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is allowed. Select See details to see the security rules that are allowing the outbound communication from the source virtual machine.
     • Inbound connectivity to the destination virtual machine is denied. Select See details to see the security rule that is denying the inbound communication to the destination virtual machine.
     • Azure default system route is used to route traffic between the two virtual machines (Route table ID: System route).
     • Port 3389 is unreachable on the destination virtual machine because of the security rule that is denying inbound communication to the destination port.

     Solution: Update the network security group on the destination virtual machine to allow inbound RDP traffic.

   • If the source virtual machine has a network security group that's denying RDP connections to the destination, you see the following results:

     

     • 30 probes were sent and failed to reach the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is denied. Select See details to see security rule that is denying the outbound communication from the source virtual machine.
     • Inbound connectivity to the destination virtual machine is allowed. Select See details to see the security rules that are allowing the inbound communication to the destination virtual machine.
     • Azure default system route is used to route traffic between the two virtual machines (Route table ID: System route).
     • Port 3389 is reachable on the destination virtual machine.

     Solution: Update the network security group on the source virtual machine to allow outbound RDP traffic.

   • If the operating system on the destination virtual machine doesn't accept incoming connections on port 3389, you see the following results:

     

     • 30 probes were sent and failed to reach the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is allowed. Select See details to see the security rules that are allowing the outbound communication from the source virtual machine.
     • Inbound connectivity to the destination virtual machine is allowed. Select See details to see the security rules that are allowing the inbound communication to the destination virtual machine.
     • Azure default system route is used to route traffic between the two virtual machines (Route table ID: System route).
     • Port 3389 isn't reachable on the destination virtual machine (port 3389 on the operating system isn't accepting incoming RDP connections).

     Solution: Configure the operating system on the destination virtual machine to accept inbound RDP traffic.

5. Select Export to CSV to download the test results in csv format.

PowerShell

Use Test-AzNetworkWatcherConnectivity cmdlet to run connection troubleshoot to test the connectivity to a virtual machine over port 3389:

# Test connectivity between two virtual machines that are in the same resource group over port 3389.
Test-AzNetworkWatcherConnectivity -Location 'eastus' -SourceId '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup1/providers/Microsoft.Compute/virtualMachines/VM1' -DestinationId '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup2/providers/Microsoft.Compute/virtualMachines/VM2' -DestinationPort '3389'  | Format-List

• If the two virtual machines are communicating with no issues, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Reachable
  AvgLatencyInMs   : 1
  MinLatencyInMs   : 1
  MaxLatencyInMs   : 1
  ProbesSent       : 66
  ProbesFailed     : 0
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "VirtualMachine",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.0.0.5",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Reachable (destination virtual machine is reachable over port 3389).
  • 66 probes were successfully sent to the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).

• If the destination virtual machine has a network security group that's denying incoming RDP connections, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "VirtualMachine",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.0.0.5",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
                         "NextHopIds": [],
                         "Issues": [
                           {
                             "Origin": "Inbound",
                             "Severity": "Error",
                             "Type": "NetworkSecurityRule",
                             "Context": [
                               {
                                 "key": "RuleName",
                                 "value": 
                     "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM2-nsg/SecurityRules/Deny3389Inbound"
                               }
                             ]
                           },
                           {
                             "Origin": "Local",
                             "Severity": "Error",
                             "Type": "NoListenerOnDestination",
                             "Context": []
                           }
                         ]
                       }
                     ]
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Inbound connectivity to the destination virtual machine is denied by the security rule Deny3389Inbound in the network security group VM2-nsg.

  Solution: Update the network security group on the destination virtual machine to allow inbound RDP traffic.

• If the source virtual machine has a network security group that's denying RDP connections to the destination, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": [
                           {
                             "Origin": "Outbound",
                             "Severity": "Error",
                             "Type": "NetworkSecurityRule",
                             "Context": [
                               {
                                 "key": "RuleName",
                                 "value": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM1-nsg/SecurityRules/Deny3389Outbound"
                               }
                             ]
                           }
                         ]
                       },
                       {
                         "Type": "VirtualMachine",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.0.0.5",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
                         "NextHopIds": [],
                         "Issues": [
                           {
                             "Origin": "Local",
                             "Severity": "Error",
                             "Type": "NoListenerOnDestination",
                             "Context": []
                           }
                         ]
                       }
                     ]
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Outbound connectivity from the source virtual machine is denied by the security rule Deny3389Outbound in the network security group VM1-nsg.

  Solution: Update the network security group on the source virtual machine to allow outbound RDP traffic.

• If the operating system on the destination virtual machine doesn't accept incoming connections on port 3389, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "VirtualMachine",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.0.0.5",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
                         "NextHopIds": [],
                         "Issues": [
                           {
                             "Origin": "Local",
                             "Severity": "Error",
                             "Type": "NoListenerOnDestination",
                             "Context": []
                           },
                           {
                             "Origin": "Local",
                             "Severity": "Error",
                             "Type": "GuestFirewall",
                             "Context": []
                           }
                         ]
                       }
                     ]
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Port 3389 isn't reachable on the destination virtual machine (the output has NoListenerOnDestination and GuestFirewall errors on the destination virtual machine).

  Solution: Configure the operating system on the destination virtual machine to accept inbound RDP traffic.

Azure CLI

Use az network watcher test-connectivity command to run connection troubleshoot diagnostic tests to test the connectivity to a virtual machine over port 3389:

# Test connectivity between two virtual machines that are in the same resource group over port 3389.
az network watcher test-connectivity --resource-group 'myResourceGroup' --source-resource 'VM1' --dest-resource 'VM2' --protocol 'TCP' --dest-port '3389'

Note

If the virtual machines aren't in the same resource group, use their resource IDs instead of their names. For example, use the following command to test connectivity between two virtual machines that are in two different resource groups:

# Test connectivity between two virtual machines that are in two different resource groups over port 3389.
az network watcher test-connectivity --source-resource '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup1/providers/Microsoft.Compute/virtualMachines/VM1' --dest-resource '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup2/providers/Microsoft.Compute/virtualMachines/VM2' --protocol 'TCP' --dest-port '3389'

• If the two virtual machines are communicating with no issues, you see the following results:

  {
    "avgLatencyInMs": 1,
    "connectionStatus": "Reachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": "",
            "roundTripTimeAvg": 1,
            "roundTripTimeMax": 1,
            "roundTripTimeMin": 1
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.0.0.5",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
        "type": "VirtualMachine"
      }
    ],
    "maxLatencyInMs": 1,
    "minLatencyInMs": 1,
    "probesFailed": 0,
    "probesSent": 66
  }
  

  • Connection status is Reachable (destination virtual machine is reachable over port 3389).
  • 66 probes were successfully sent to the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).

• If the destination virtual machine has a network security group that's denying incoming RDP connections, you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.0.0.5",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [
          {
            "context": [
              {
                "key": "RuleName",
                "value": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM2-nsg/SecurityRules/Deny3389Inbound"
              }
            ],
            "origin": "Inbound",
            "severity": "Error",
            "type": "NetworkSecurityRule"
          },
          {
            "context": [],
            "origin": "Local",
            "severity": "Error",
            "type": "NoListenerOnDestination"
          }
        ],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
        "type": "VirtualMachine"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Inbound connectivity to the destination virtual machine is denied by the security rule Deny3389Inbound in the network security group VM2-nsg.

  Solution: Update the network security group on the destination virtual machine to allow inbound RDP traffic.

• If the source virtual machine has a network security group that's denying RDP connections to the destination, you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [
          {
            "context": [
              {
                "key": "RuleName",
                "value": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM1-nsg/SecurityRules/Deny3389Outbound"
              }
            ],
            "origin": "Outbound",
            "severity": "Error",
            "type": "NetworkSecurityRule"
          }
        ],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.0.0.5",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [
          {
            "context": [],
            "origin": "Local",
            "severity": "Error",
            "type": "NoListenerOnDestination"
          }
        ],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
        "type": "VirtualMachine"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Outbound connectivity from the source virtual machine is denied by the security rule Deny3389Outbound in the network security group VM1-nsg.

  Solution: Update the network security group on the source virtual machine to allow outbound RDP traffic.

• If the operating system on the destination virtual machine doesn't accept incoming connections on port 3389, you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.0.0.5",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [
          {
            "context": [],
            "origin": "Local",
            "severity": "Error",
            "type": "NoListenerOnDestination"
          },
          {
            "context": [],
            "origin": "Local",
            "severity": "Error",
            "type": "GuestFirewall"
          }
        ],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM2",
        "type": "VirtualMachine"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (destination virtual machine is unreachable over port 3389).
  • 30 probes were sent and failed to reach the destination virtual machine.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).
  • Port 3389 isn't reachable on the destination virtual machine (the output has NoListenerOnDestination and GuestFirewall errors on the destination virtual machine).

  Solution: Configure the operating system on the destination virtual machine to accept inbound RDP traffic.

Test connectivity to a web address

In this section, you test the connectivity between a virtual machine and a web address.

Portal

1. On the Connection troubleshoot page. Enter or select the following information:

   Setting	Value
   Source
   Source type	Select Virtual machine.
   Virtual machine	Select the virtual machine that you want to troubleshoot the connection from.
   Destination
   Destination type	Select Specify manually.
   URI, FQDN, or IP address	Enter the web address that you want to test the connectivity to. In this example, www.bing.com is used.
   Probe Settings
   Preferred IP version	Select Both. The other available options are: IPv4 and IPv6.
   Protocol	Select TCP. The other available option is: ICMP.
   Destination port	Enter 443. Port 443 for HTTPS.
   Source port	Leave blank or enter a source port number that you want to test.
   Connection Diagnostic
   Diagnostics tests	Select Connectivity.

   

2. Select Run diagnostic tests.

   • If www.bing.com is reachable from the source virtual machine, you see the following results:

     

     66 probes were successfully sent to www.bing.com. Select See details to see the next hop details.

   • If www.bing.com is unreachable from the source virtual machine due to a security rule, you see the following results:

     

     30 probes were sent and failed to reach www.bing.com. Select See details to see the next hop details and the cause of the error.

     Solution: Update the network security group on the source virtual machine to allow outbound traffic to www.bing.com.

3. Select Export to CSV to download the test results in csv format.

PowerShell

Use Test-AzNetworkWatcherConnectivity cmdlet to run connection troubleshoot to test the connectivity to www.bing.com:

# Test connectivity from a virtual machine to www.bing.com.
Test-AzNetworkWatcherConnectivity -Location 'eastus' -SourceId '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1' -DestinationAddress 'www.bing.com' -DestinationPort '443' | Format-List

• If www.bing.com is reachable from the source virtual machine, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Reachable
  AvgLatencyInMs   : 1
  MinLatencyInMs   : 1
  MaxLatencyInMs   : 6
  ProbesSent       : 66
  ProbesFailed     : 0
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "Internet",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "150.171.30.10",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Reachable (www.bing.com is reachable from VM1).
  • 66 probes were successfully sent to www.bing.com with average latency of 9 ms.
  • Next hop type is Internet.

• If www.bing.com is unreachable from the source virtual machine due to a security rule, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": [
                           {
                             "Origin": "Outbound",
                             "Severity": "Error",
                             "Type": "NetworkSecurityRule",
                             "Context": [
                               {
                                 "key": "RuleName",
                                 "value": 
                     "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM1-nsg/SecurityRules/DenyInternetOutbound"
                               }
                             ]
                           }
                         ]
                       },
                       {
                         "Type": "Internet",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "203.0.113.184",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Unreachable (www.bing.com isn't reachable from VM1).
  • 30 probes were sent and failed to reach www.bing.com.
  • Outbound connectivity from the source virtual machine is denied by the security rule DenyInternetOutbound in the network security group VM1-nsg.
  • Next hop type is Internet.

  Solution: Update the network security group on the source virtual machine to allow outbound traffic to www.bing.com.

Azure CLI

Use az network watcher test-connectivity command to run connection troubleshoot to test the connectivity to www.bing.com:

# Test connectivity from a virtual machine to www.bing.com.
az network watcher test-connectivity --resource-group 'myResourceGroup' --source-resource 'VM1' --dest-address 'www.bing.com' --protocol 'TCP' --dest-port '443'

• If www.bing.com is reachable from the source virtual machine, you see the following results:

  {
    "avgLatencyInMs": 9,
    "connectionStatus": "Reachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "Internet",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": "",
            "roundTripTimeAvg": 9,
            "roundTripTimeMax": 9,
            "roundTripTimeMin": 9
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "104.117.244.81",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "Internet",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "type": "Internet"
      }
    ],
    "maxLatencyInMs": 13,
    "minLatencyInMs": 7,
    "probesFailed": 0,
    "probesSent": 66
  }
  

  • Connection status is Reachable (www.bing.com is reachable from VM1).
  • 66 probes were successfully sent to www.bing.com with average latency of 9 ms.
  • Next hop type is Internet.

• If www.bing.com is unreachable from the source virtual machine due to a security rule, you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [
          {
            "context": [
              {
                "key": "RuleName",
                "value": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkSecurityGroups/VM1-nsg/SecurityRules/DenyInternetOutbound"
              }
            ],
            "origin": "Outbound",
            "severity": "Error",
            "type": "NetworkSecurityRule"
          }
        ],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "Internet",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "203.0.113.184",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "Internet",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "type": "Internet"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (www.bing.com isn't reachable from VM1).
  • 30 probes were sent and failed to reach www.bing.com.
  • Outbound connectivity from the source virtual machine is denied by the security rule DenyInternetOutbound in the network security group VM1-nsg.
  • Next hop type is Internet.

  Solution: Update the network security group on the source virtual machine to allow outbound traffic to www.bing.com.

Test connectivity to an IP address

In this section, you test the connectivity between a virtual machine and an IP address of another virtual machine.

Portal

1. On the Connection troubleshoot page. Enter or select the following information:

   Setting	Value
   Source
   Source type	Select Virtual machine.
   Virtual machine	Select the virtual machine that you want to troubleshoot the connection from.
   Destination
   Destination type	Select Specify manually.
   URI, FQDN, or IP address	Enter the IP address that you want to test the connectivity to. In this example, 10.10.10.10 is used.
   Probe Settings
   Preferred IP version	Select IPv4. The other available options are: Both and IPv6.
   Protocol	Select TCP. The other available option is: ICMP.
   Destination port	Enter 3389.
   Source port	Leave blank or enter a source port number that you want to test.
   Connection Diagnostic
   Diagnostics tests	Select Connectivity, NSG diagnostic, and Next hop.

   

2. Select Run diagnostic tests.

   • If the IP address is reachable, you see the following results:

     

     • 66 probes were successfully sent with average latency of 4 ms. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is allowed. Select See details to see the security rules that are allowing the outbound communication from the source virtual machine.
     • Azure default system route is used to route traffic to the IP address, which is in the same virtual network or a peered virtual network. (Route table ID: System route and Next hop type: Virtual Network).

   • If the IP address is unreachable because the destination virtual machine isn't running, you see the following results:

     

     • 30 probes were sent and failed to reach the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is allowed. Select See details to see the security rules that are allowing the outbound communication from the source virtual machine.
     • Azure default system route is used to route traffic to the IP address, which is in the same virtual network or a peered virtual network. (Route table ID: System route and Next hop type: Virtual Network).

     Solution: Start the destination virtual machine.

   • If there's no route to the IP address in the routing table of the source virtual machine (for example, the IP address isn't in the address space of the VM's virtual network or its peered virtual networks), you see the following results:

     

     • 30 probes were sent and failed to reach the destination virtual machine. Select See details to see the next hop details.
     • Outbound connectivity from the source virtual machine is denied. Select See details to see security rule that is denying the outbound communication from the source virtual machine.
     • Next hop type is None because there isn't a route to the IP address.

     Solution: Associate a route table with a correct route to the subnet of the source virtual machine.

3. Select Export to CSV to download the test results in csv format.

PowerShell

Use Test-AzNetworkWatcherConnectivity cmdlet to run connection troubleshoot to test RDP connectivity to 10.10.10.10:

# Test connectivity from a virtual machine to 10.10.10.10 over port 3389.
Test-AzNetworkWatcherConnectivity -Location 'eastus' -SourceId '/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1' -DestinationAddress '10.10.10.10' -DestinationPort '3389' | Format-List

• If the IP address is reachable, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Reachable
  AvgLatencyInMs   : 1
  MinLatencyInMs   : 1
  MaxLatencyInMs   : 3
  ProbesSent       : 66
  ProbesFailed     : 8
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "VirtualNetwork",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.10.10.10",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Reachable (10.10.10.10 is reachable over port 3389).
  • 66 probes were successfully sent to 10.10.10.10 with average latency of 2 ms.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).

• If the IP address is unreachable because the destination virtual machine isn't running, you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.0.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": []
                       },
                       {
                         "Type": "VirtualNetwork",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.10.10.10",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup1/providers/Microsoft.Network/networkInterfaces/vm2375/ipConfigurations/ipconfig1",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Unreachable (10.10.10.10 is unreachable over port 3389).
  • 30 probes were sent and failed to reach 10.10.10.10.
  • No issues in the source virtual machine.
  • No issues with 10.10.10.10.

  Solution: Start the destination virtual machine.

• If there's no route to the IP address in the routing table of the source virtual machine (for example, the IP address isn't in the address space of the VM's virtual network or its peered virtual networks), you see the following results:

  Hops             : {aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb, bbbbbbbb-1111-2222-3333-cccccccccccc}
  ConnectionStatus : Unreachable
  AvgLatencyInMs   : 
  MinLatencyInMs   : 
  MaxLatencyInMs   : 
  ProbesSent       : 30
  ProbesFailed     : 30
  HopsText         : [
                       {
                         "Type": "Source",
                         "Id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
                         "Address": "10.1.0.4",
                         "ResourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
                         "NextHopIds": [
                           "bbbbbbbb-1111-2222-3333-cccccccccccc"
                         ],
                         "Issues": [
                           {
                             "Origin": "Local",
                             "Severity": "Error",
                             "Type": "RouteMissing",
                             "Context": []
                           },
                           {
                             "Origin": "Outbound",
                             "Severity": "Error",
                             "Type": "UserDefinedRoute",
                             "Context": [
                               {
                                 "key": "ErrorMessage",
                                 "value": "NextHop Type None, NextHop IP "
                               }
                             ]
                           },
                           {
                             "Origin": "Outbound",
                             "Severity": "Error",
                             "Type": "NetworkSecurityRule",
                             "Context": [
                               {
                                 "key": "RuleName",
                                 "value": "DefaultRule_DenyAllOutBound"
                               }
                             ]
                           }
                         ]
                       },
                       {
                         "Type": "Destination",
                         "Id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
                         "Address": "10.0.0.4",
                         "NextHopIds": [],
                         "Issues": []
                       }
                     ]
  

  • Connection status is Unreachable (10.10.10.10 is unreachable over port 3389).
  • 30 probes were sent and failed to reach 10.10.10.10.
  • No route in the routing table of the source virtual machine to 10.10.10.10 (the output has RouteMissing error on the source virtual machine).
  • Next hop type is None because there's no route to 10.10.10.10.
  • Outbound connectivity from the source virtual machine is denied by the security rule DefaultRule_DenyAllOutBound in the network security group VM1-nsg.

  Solution: Associate a route table with a correct route to the subnet of the source virtual machine.

Azure CLI

Use az network watcher test-connectivity command to run connection troubleshoot to test RDP connectivity to 10.10.10.10:

# Test connectivity from a virtual machine to 10.10.10.10 over port 3389.
az network watcher test-connectivity --resource-group 'myResourceGroup' --source-resource 'VM1' --dest-address '10.10.10.10' --protocol 'TCP'  --dest-port '3389'

• If the IP address is reachable, you see the following results:

  {
    "avgLatencyInMs": 2,
    "connectionStatus": "Reachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": "",
            "roundTripTimeAvg": 2,
            "roundTripTimeMax": 2,
            "roundTripTimeMin": 2
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.10.10.10",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkInterfaces/vm2375/ipConfigurations/ipconfig1",
        "type": "VirtualNetwork"
      }
    ],
    "maxLatencyInMs": 7,
    "minLatencyInMs": 1,
    "probesFailed": 0,
    "probesSent": 66
  }
  

  • Connection status is Reachable (10.10.10.10 is reachable over port 3389).
  • 66 probes were successfully sent to 10.10.10.10 with average latency of 2 ms.
  • There are two hops in the path between the two virtual machines (no appliances or other resources in the path between the two VMs).

• If the IP address is unreachable because the destination virtual machine isn't running, you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.10.10.10",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Network/networkInterfaces/vm2375/ipConfigurations/ipconfig1",
        "type": "VirtualNetwork"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (10.10.10.10 is unreachable over port 3389).
  • 30 probes were sent and failed to reach 10.10.10.10.
  • No issues in the source virtual machine.
  • No issues with 10.10.10.10.

  Solution: Start the destination virtual machine.

• If there's no route to the IP address in the routing table of the source virtual machine (for example, the IP address isn't in the address space of the VM's virtual network or its peered virtual networks), you see the following results:

  {
    "connectionStatus": "Unreachable",
    "hops": [
      {
        "address": "10.0.0.4",
        "id": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
        "issues": [
          {
            "context": [],
            "origin": "Local",
            "severity": "Error",
            "type": "RouteMissing"
          },
          {
            "context": [
              {
                "key": "ErrorMessage",
                "value": "NextHop Type None, NextHop IP "
              }
            ],
            "origin": "Outbound",
            "severity": "Error",
            "type": "UserDefinedRoute"
          },
          {
            "context": [
              {
                "key": "RuleName",
                "value": "DefaultRule_DenyAllOutBound"
              }
            ],
            "origin": "Outbound",
            "severity": "Error",
            "type": "NetworkSecurityRule"
          }
        ],
        "links": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "bbbbbbbb-1111-2222-3333-cccccccccccc",
            "resourceId": ""
          }
        ],
        "nextHopIds": [
          "bbbbbbbb-1111-2222-3333-cccccccccccc"
        ],
        "previousHopIds": [],
        "previousLinks": [],
        "resourceId": "/subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourceGroups/myResourceGroup/providers/Microsoft.Compute/virtualMachines/VM1",
        "type": "Source"
      },
      {
        "address": "10.10.10.10",
        "id": "bbbbbbbb-1111-2222-3333-cccccccccccc",
        "issues": [],
        "links": [],
        "nextHopIds": [],
        "previousHopIds": [
          "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb"
        ],
        "previousLinks": [
          {
            "context": {},
            "issues": [],
            "linkType": "VirtualNetwork",
            "nextHopId": "aaaaaaaa-0000-1111-2222-bbbbbbbbbbbb",
            "resourceId": ""
          }
        ],
        "type": "Destination"
      }
    ],
    "probesFailed": 30,
    "probesSent": 30
  }
  

  • Connection status is Unreachable (10.10.10.10 is unreachable over port 3389).
  • 30 probes were sent and failed to reach 10.10.10.10.
  • No route in the routing table of the source virtual machine to 10.10.10.10 (the output has RouteMissing error on the source virtual machine).
  • Next hop type is None because there's no route to 10.10.10.10.
  • Outbound connectivity from the source virtual machine is denied by the security rule DefaultRule_DenyAllOutBound in the network security group VM1-nsg.

  Solution: Associate a route table with a correct route to the subnet of the source virtual machine.

Related content

• What is Azure Network Watcher?
• Connection troubleshoot