Поделиться через

Announcing Cumulative Update 3 for Microsoft Dynamics AX 2012 & Microsoft Dynamics AX 2012 Feature Pack 1

  • Статья

The Dynamics AX Sustained Engineering team released Cumulative Update 3 for Microsoft Dynamics AX 2012 on June 28, 2012. This release includes all previously released Cumulative Updates for Dynamics AX 2012 plus additional hotfixes and improvements based on feedback from our customers and partners. This cumulative update is applicable for both Microsoft Dynamics AX 2012 RTM (6.0.947.0) & Microsoft Dynamics AX 2012 Feature Pack 1 RTM (6.0.1108.0).

It is recommended to read the release notes prior to installation of Microsoft Dynamics AX2012 Cumulative Update 3 (6.0.1108.670).

For more information on the Cumulative Update 3 for Microsoft Dynamics AX 2012 release, inclusive of the release notes and how to download, please refer KB2709934.

Comments

  • Anonymous
    January 01, 2003
    @DynamicStuPot: It is not required to remove the existing updates from the "Updates" folder as setup -- copying in the CU3 is sufficient as setup will recognize the newer content and use it during the slipstream installation. That said, you can remove the two previous updates if you so choose -- either way will work.

  • Anonymous
    January 01, 2003
    @Carl Gibson Doing as you suggest adding CU3 to the updates fails, although the install finds CU3 the install fails when using SQL 2012 I have found the if you do the install from the CD by adding & adding DynamicsAX2012-KB2680186 the update for SQL 2012 do the install and then run though the procedure for adding CU3 additionally the install is all ok until you get to your first compile then I find 21 warnings & 1 Task.  Surely there should be no warnings when installing this?

  • Anonymous
    January 01, 2003
    For a new install of AX 2012 I’m assuming the correct procedure is to take the AX2012 Feature pack media remove the 2 updates from the update folder and copy CU3 into the update folder can anyone confirm?

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    June 29, 2012
    The fix looks only for x86 not for 64 bit.. please let me know if we can use the same for 64 bit

  • Anonymous
    July 03, 2012
    Is this CU also applicable on the AX Feature Pack version?

  • Anonymous
    July 15, 2012
    Hi Archana, We installed CU3 on a system with AX RTM + CU2 and we got around 150 errors and 8 warnings on compiling base product. This system was a vanilla version with no code modifications. We also intsalled this CU on a system with AX Feature Pack  and we got around 70 errors on compiling the base product. Any idea why this errors could be occurring, especially when there are no customizations on the system?

  • Anonymous
    July 24, 2012
    @Archana type "axutil list" in the AX 2012 management shell - are you sure you have no usr model?

  • Anonymous
    July 28, 2012
    The comment has been removed

  • Anonymous
    August 02, 2012
    Hello, Archana Prasad MS release AX2012 FP version included KB2606916(CU2) and KB2650968. Then if we install in SQL2012 environemnt, we need to install KB2680186 too.  Here after those three KB patched, AX2012 version number is 6.0.1108.152 So if we install CU3， we don't need to install CU2 as it included. But I don't know whether we still need to install KB2680186 and KB2650968? Any suggestions? Thanks a lot Best Regards Jacky

  • Anonymous
    August 16, 2012
    Some more information about the update sequence would be very welcome. For example: is installing KB2680186 (SQL2012 compatibility) still needed? This fix is not listed on the "hotfixes that are included in the CU3 release". Also the KB2650968 hotfix (needed for RTM to FPK upgrade) is not listed as well. So the big question: when wanting to slipstream CU3 in the installation media, what should be the content of the updates folder?

  • Anonymous
    August 24, 2012
    @JON: did you solve your problem? I've the same error

  • Anonymous
    August 27, 2012
    Hi I have tried to slipstream the CU3 (both with the 2 current KB and also removing them) but I always get errors when I install. But if I install the FP first and then directly CU3, it's ok. I will try to find the log from the last attempt and post the error here.

  • Anonymous
    August 28, 2012
    Looks like I couldnt post so much from the log, so here is a smaller part: 2012-08-27 21:16:00Z Importing file 'D:InstallAXDAX2012 Feature PackModelsStandardExtensions.axmodel' to the database 'SQL01DAX2012_LIVE'. 2012-08-27 21:16:00Z Importing file 'D:InstallAXDAX2012 Feature PackUpdatesCU3Modelsextensionsdynamicsax2012-kb2709934-extensions.axmodel' to the database 'SQL01DAX2012_LIVE'. 2012-08-27 21:16:00Z Importing file 'D:InstallAXDAX2012 Feature PackUpdatesCU3Modelsfpplabelsdynamicsax2012-kb2709934-fpplabels.axmodel' to the database 'SQL01DAX2012_LIVE'. 2012-08-27 21:16:57Z ****************************************************************************************************** 2012-08-27 21:16:57Z Violation of PRIMARY KEY constraint 'PK_ElementHandleMerge'. Cannot insert duplicate key in object 'dbo.ModelElementMerge'. The duplicate key value is (34). 2012-08-27 21:16:57Z The statement has been terminated. 2012-08-27 21:16:57Z ****************************************************************************************************** 2012-08-27 21:16:57Z Model import resulted in an error. See previous log messages for details. 2012-08-27 21:16:57Z Model Update for Extensions (Microsoft Corporation) not found. 2012-08-27 21:16:57Z Importing file 'D:InstallAXDAX2012 Feature PackUpdatesCU3Modelsextensionsdynamicsax2012-kb2709934-extensions.axmodel' to the database 'SQL01DAX2012_LIVE'. 2012-08-27 21:17:02Z ****************************************************************************************************** 2012-08-27 21:17:02Z The model file references an element that belongs to another model that 2012-08-27 21:17:02Z does not exists in the model store. You can use the /createparents 2012-08-27 21:17:02Z command switch to create a model where these elements will be placed.

  • Anonymous
    August 28, 2012
    Hello, I noticed that the method transactionCurrencySalesAmt() for ProjectAccountingDistribution table was delivered with CU03. It's a little bit strange because there exists already another transactionCurrencySalesAmount() - the most complete and perfect one. Can somebody provide more details on this issue? Thanks in advance.

  • Anonymous
    September 23, 2012
    @Fredrik, I got the same issue and it seem to be db server related as it works fine on a local test server. The only difference I can see is that the problem db server has default Latin1_General_CI_AS and the working server SQL_Latin1_General_CP1_CI_AS. The version is also different 10.50.1790.0 vs 10.50.2500.0.

  • Anonymous
    September 26, 2012
    Hello, I have a quick question about AX 2009 > 2012 upgrade paths.  Is it possible to directly upgrade from AX 2009 SP1 to AX 2012 Feature Pack with Cumulative Update 3 (CU3)?  Or do you have to upgrade to AX 2012 Feature Pack first and then separately upgrade to CU3? Regards, Ash Kumar

  • Anonymous
    October 10, 2012
    I have now tested on a SQL 2008 R2 server with one SQL_Latin1_General_CP1_CI_AS instance and one Latin1_General_CI_AS. The slipstream works on CP1 and not the other. What is up with this, no one using slipstream?

  • Anonymous
    October 10, 2012
    @Jonas: I faces the exact same problem you do. The slipstream process is really awesome, but if it doesnt work as expected it is of no use.....Personaly i install the base FPK (including the SQL 2012 hotfix package), when this is installed correctly, i install CU3 right afterwards with the AxUpdate.exe process. When this is finished (it is succesful in all selected colations i used until now) i start the compile, CIL compile etc. Conclusion: slipstreaming CU3 is not working as expected.