Поделиться через

Factoring large numbers with quadratic sieve

  • Статья

Today I'm going to talk about how the quadratic sieve factoring algorithm works, giving a comprehensive description assuming knowledge of only basic university-level mathematics.

The foundation of the most popular public-key cryptography algorithm in use today, RSA, rests on the difficulty of factoring large integers. When keys are generated, efficient algorithms are used to generate two very large prime numbers and multiply them together. The person who generated the keys knows these two numbers, but everyone else only knows the product. The product contains enough information to encrypt a message to the person; the two primes allow the recipient to decrypt it. There is no known way to decrypt it without using the primes, but by factoring, we can extract the two prime factors from the product and break the encryption.

At the time that RSA was invented in 1977, factoring integers with as few as 80 decimal digits was intractable; all known algorithms were either too slow or required the number to have a special form. This made even small, 256-bit keys relatively secure. The first major breakthrough was quadratic sieve, a relatively simple factoring algorithm invented by Carl Pomerance in 1981, which can factor numbers up to 100 digits and more. It's still the best known method for numbers under 110 digits or so; for larger numbers, the general number field sieve (GNFS) is now used. However, the general number field sieve is extremely complicated, and requires extensive explanation and background for even the most basic implementation. However, GNFS is based on the same fundamental ideas as quadratic sieve, so if factoring the largest numbers in the world is your goal, this is the place to start.

We'll begin by addressing a few problems that at first glance have nothing to do with factoring, then assemble them into a working algorithm. I won't be motivating them first, but trust me - they're important.

Finding a subset of integers whose product is a square

Suppose I give you a set of integers and I ask you to find a subset of those integers whose product is a square, if one exists. For example, given the set {10, 24, 35, 52, 54, 78}, the product 24×52×78 is 97344 = 3122. The brute-force solution, trying every subset, is too expensive because there are an exponential number of subsets.

We'll take a different approach based on prime factorizations and linear algebra. First, we factor each of the input numbers into prime factors; for now we will assume that these numbers are easy to factor. For the above example set, we get:

10 = 2 × 5
24 = 23 × 3
35 = 5 × 7
52 = 22 × 13
54 = 2 × 33
78 = 2 × 3 × 13

When you multiply two numbers written as prime factorizations, you simply add the exponents of the primes used. For example, the exponent of 2 in 24×52×78 is 6, because it's 3 in 24, 2 in 52, and 1 in 78. A number is a square if and only if all the exponents in its prime factorization are even. Suppose we write the above factorizations as vectors, where the kth entry corresponds to the exponent of the kth prime number. We get:

[1 0 1 0 0 0]
[3 1 0 0 0 0]
[0 0 1 1 0 0]
[2 0 0 0 0 1]
[1 3 0 0 0 0]
[1 1 0 0 0 1]

Now, multiplying numbers is as simple as adding vectors. If we add rows 2, 4, and 6, we get [6 2 0 0 0 2], which has all even exponents and so must be a square. In more familiar terms, we want the last bit of each entry in the sum to be zero. But in this case, we don't need to store all of the numbers above, only the last bit of each number. This gives us the following:

[1 0 1 0 0 0]
[1 1 0 0 0 0]
[0 0 1 1 0 0]
[0 0 0 0 0 1]
[1 1 0 0 0 0]
[1 1 0 0 0 1]

Moreover, since we're only interested in last bits, we can perform all our addition using one-bit integers with wraparound semantics (in other words, mod 2). If we add rows 2, 4, and 6 in this way, we get [0 0 0 0 0 0 0], the zero vector. In fact, all squares correspond to the zero vector.

Let's rephrase this as a matrix equation problem. If we transpose the above matrix, so that rows become columns, we get this:

[1 1 0 0 1 1]
[0 1 0 0 1 1]
[1 0 1 0 0 0]
[0 0 1 0 0 0]
[0 0 0 0 0 0]
[0 0 0 1 0 1]

Call this matrix A. If we multiply A by the vector [0 1 0 1 0 1], using one-bit integer arithmetic, we get the zero vector. This tells us precisely which numbers we need to multiply to get a square. So, our goal is to find a nonzero vector x such that Ax=0 (remember, all arithmetic here is with one-bit integers).

If you've had a course in linear algebra, this problem should look very familiar; it's the problem of finding the null space of a matrix, the set of vectors such that Ax=0. The problem can be solved using row reduction (Gaussian elimination). We row reduce the matrix, and then assign values to the free variables in a way that gives us a nonzero solution. The other variables will be determined by these values and the matrix. You probably studied this problem using rational numbers, not one-bit integers, but it turns out row reduction works just as well for these. For example, if we add row 1 to row 3 in the above matrix, we get the following:

[1 1 0 0 1 1]
[0 1 0 0 1 1]
[0 1 1 0 1 1]
[0 0 1 0 0 0]
[0 0 0 0 0 0]
[0 0 0 1 0 1]

Completing the row reduction, we eventually end up with this matrix:

[1 0 0 0 0 0]
[0 1 0 0 1 1]
[0 0 1 0 0 0]
[0 0 0 1 0 1]
[0 0 0 0 0 0]
[0 0 0 0 0 0]

If we turn this back into a system of equations and rearrange, we get this:

x1 = 0
x2 = −x5 − x6
x3 = 0
x4 = −x6

Suppose we choose x5=0, x6=1. From the above equations, it follows that the first four vectors have the values 0, 1, 0, and 1 (remember, one-bit integer arithmetic). This gives us our final vector, [0 1 0 1 0 1]. If we were to choose x5=1 and x6=0 instead, we'd get a different solution: [0 1 0 0 1 0], corresponding to 24×54 = 1296 = 362.

Moreover, a theorem of linear algebra tells us precisely how many input numbers we need to guarantee that a square can be found: as long as we have more columns than rows, the null space is guaranteed to be nontrivial, so that we have a nonzero solution. In other words, we just need more numbers than prime factors used by those numbers. As this case shows, though, this isn't a necessary condition.

The one remaining problem with this method is that if one of the numbers in our set happens to have very large factors, our matrix will have a large number of rows, which requires a lot of storage and makes row reduction inefficient. To avoid this, we require that the input numbers are B-smooth, meaning that they only have small factors less than some integer B. This also makes them easy to factor.

Fermat's method: factoring using a difference of squares

You might be wondering what squares have to do with factoring. The connection is the very simple factorization method known as Fermat's method. Although not efficient in general, it embodies the same basic idea as quadratic sieve and works great for numbers with factors close to their square root.

The idea is to find two numbers a and b such that a2−b2 = n, the number we wish to factor. If we can do this, simple algebra tells us that (a+b)(a−b) = n. If we're lucky, this is a nontrivial factorization of n; if we're not so lucky, one of them is 1 and the other is n.

The concept behind Fermat's algorithm is to search for an integer a such that a2−n is a square. If we find such an a, it follows that:

a2−(a2-n) = n

Hence we have a difference of squares equal to n. The search is a straightforward linear search: we begin with the ceiling of the square root of n, the smallest possible number such that a2−n is positive, and increment a until a2−n becomes a square. If this ever happens, we try to factor n as (a−sqrt(a2−n))(a+sqrt(a2−n)); if the factorization is trivial, we continue incrementing a.

Here's an example of Fermat's method from Wikipedia. Let n=5959; a starts out at 78. The numbers 782−5959 and 792−5959 are not squares, but 802−5959=441=212. Hence (80-21)(80+21)=5959, and this gives the nontrivial factorization 59×101=5959.

The reason Fermat's method is slow is because simply performing a linear search of all possible a hoping that we'll hit one with a2−n square is a poor strategy − there just aren't that many squares around to hit. A better way of going about it is to proactively compute an a having this property (actually a similar property).

The key is to notice that if we take a number of a2−n values, none of which are squares themselves, and multiply them, we may get a square, say S. Let A be the product of the corresponding values of a. Basic algebra shows that A2−S is a multiple of n. Hence, (A−sqrt(S))(A+sqrt(S)) is a factorization of some multiple of n; in other words, at least one of these shares a factor with n. By computing the greatest common divisor (GCD) of each with n using Euclid's algorithm, we can identify this factor. Again, it may be trivial (just n itself); if so we try again with a different square.

All that remains is, given a list of a2−n values, to find a subset whose product is a square. But this is precisely an instance of the problem discussed in the last section. Unfortunately, recall that that the method we came up with there is not efficient for numbers with large factors; the matrix becomes too large. What do we do? We simply throw away numbers with large factors! Theoretical results show that there are a fairly large number of values in the sequence a2−n that are smooth (recall that smooth numbers have only small factors). This gives us a new factoring method that works pretty well up to a point.

For example, consider the number 90283. If we start a at 301 and increment it up to 360 while computing a2−n, we get the following values:

318, 921, 1526, 2133, 2742, 3353, 3966, 4581, 5198, 5817, 6438, 7061, 7686, 8313, 8942, 9573, 10206, 10841, 11478, 12117, 12758, 13401, 14046, 14693, 15342, 15993, 16646, 17301, 17958, 18617, 19278, 19941, 20606, 21273, 21942, 22613, 23286, 23961, 24638, 25317, 25998, 26681, 27366, 28053, 28742, 29433, 30126, 30821, 31518, 32217, 32918, 33621, 34326, 35033, 35742, 36453, 37166, 37881, 38598, 39317

None of these are squares (the first square occurs at a=398); however, if we factor each value we will discover that 7 of these values have no factor larger than 43:

6438, 10206, 16646, 19278, 19941, 30821, 35742

If we take these 7 values and feed them to the algorithm described in the last section, it finds a square: 19278×19941×30821×35742 = 423481541612104836 = 6507545942. The corresponding original a were 331, 332, 348, and 355, and their product is 13576057680. Now, we can factor the number:

(13576057680−650754594)(13576057680+650754594) = 12925303086 × 14226812274 is a multiple of 90283
GCD(90283, 12925303086) = 137
GCD(90283, 14226812274) = 659
137 × 659 = 90283.

Making it faster: sieving for smooth numbers

The factorization algorithm above is considerably better than Fermat's algorithm, but if we try to scale up the size of number we factor, we quickly encounter a bottleneck: finding the smooth numbers in the sequence. Only 7 of the 60 values we computed in our last example were 43-smooth (actually we were lucky to get a square with so few vectors). As the size of the number that we're factoring grows, so does the size of the numbers in the sequence, and the proportion of smooth numbers rapidly shrinks. Although finding smooth numbers doesn't require completely factoring every number in the sequence (we only have to test primes up to the smoothness limit), it's still too expensive to test every number in the sequence this way.

The key is to observe that the prime factors of the sequence a2−n follow a predictable sequence. Let's take a look at the prime factorizations of the first ten or so numbers in our example sequence above:

318 = 2×3×53
921 = 3×307
1526 = 2×7×109
2133 = 33×79
2742 = 2×3×457
3353 = 7×479
3966 = 2×3×661
4581 = 32×509
5198 = 2×23×113
5817 = 3×7×277

The most obvious pattern is that every other number is even, beginning with the first one. This should be no surprise, since we're effectively adding 2a+1 to get each new number, which is always odd. Also, you'll notice that the first and second numbers are divisible by 3, as are the fourth and fifth, the seventh and eigth, and so on. If you look at the larger list, you'll notice similar patterns for larger primes; for example, the 3rd and 6th numbers are divisible by 7, and every 7th number after each of them as well. And, mysteriously, not one number in our entire sequence is divisible by 5!

So what's going on? The answer involves what number theorists call quadratic residues. A number a is called a quadratic residue mod p if there is some square S such that S−a is divisible by p. Half of all numbers are quadratic residues mod p, regardless of the value of p, and there's a simple formula for determining whether or not a particular number is: just take a, raise it to the power (p−1)/2, and then take the remainder after division by p. Then a is a quadratic residue mod p if and only if the answer is 1. Although this computation seems to involve very large values, in fact we can compute it quite quickly using exponentiation by squaring combined with frequent remainder operations.

This explains why none of our values are divisible by 5. If we compute 90283(5-1)/2 mod 5, we get 4, which is not 1 (remember that 90283 is our original n to be factored). Thus, there is no square such that S−n is divisible by 5; but all numbers in our sequence have this form. In practice, this means we can compute just once ahead of time which factors may occur in the sequence (primes p such that n is a quadratic residue mod p), and ignore all others.

For our next mystery, why is it that given a number in the sequence divisible by p, every pth number after that is also divisible by p? Well, simple algebra shows that if a2−n=kp, then:

(a+p)2−n = (a2−n)+p(2a+p) = kp+p(2a+p).

But this doesn't explain why it always seems to be the case that there are exactly two different initial values of a such that a2−n is divisible by p (with the exception of p=2). For example, in our sequence above the 3rd and 6th values were divisible by 7. The answer again is quadratic residues: it can be shown that the modular equation x2≡y (mod p) has exactly two solutions (if it has any), and in fact there is an efficient algorithm for computing these two solutions called the Shanks-Tonelli algorithm. I won't go into it here since it requires some background in number theory, but for small primes it isn't really needed; it suffices to test the first p numbers to see which are divisible by p. For larger primes, it becomes important to avoid this expensive scan.

Recall the Sieve of Eratosthenes, an algorithm for locating prime numbers. It starts with a list of numbers, then crosses off all numbers not divisible by 2 except 2, then does the same for 3, 5, and so on until it's done. The numbers that remain must be prime. When attempting to find a list of prime numbers, this strategy is much more efficient than running even the most advanced primality test on each number individually.

We take a similar strategy here: we begin with a table of the original values in the sequence. We then visit all the numbers divisible by 2 and divide out a factor of 2. We do the same for each power of 2 up to the size of the sequence. We then do the same for every other prime up to our smoothness bound (43 in our example). In the end, the smooth numbers and only the smooth numbers will have become 1. Since we visit less and less list elements as the prime factor increases, the overall work is much less. For example, here's our original list from the above example:

318, 921, 1526, 2133, 2742, 3353, 3966, 4581, 5198, 5817, 6438, 7061, 7686, 8313, 8942, 9573, 10206, 10841, 11478, 12117, 12758, 13401, 14046, 14693, 15342, 15993, 16646, 17301, 17958, 18617, 19278, 19941, 20606, 21273, 21942, 22613, 23286, 23961, 24638, 25317, 25998, 26681, 27366, 28053, 28742, 29433, 30126, 30821, 31518, 32217, 32918, 33621, 34326, 35033, 35742, 36453, 37166, 37881, 38598, 39317

We visit elements 1, 3, 5, and so on, dividing out 2. Here's the list after this first pass is complete:

159, 921, 763, 2133, 1371, 3353, 1983, 4581, 2599, 5817, 3219, 7061, 3843, 8313, 4471, 9573, 5103, 10841, 5739, 12117, 6379, 13401, 7023, 14693, 7671, 15993, 8323, 17301, 8979, 18617, 9639, 19941, 10303, 21273, 10971, 22613, 11643, 23961, 12319, 25317, 12999, 26681, 13683, 28053, 14371, 29433, 15063, 30821, 15759, 32217, 16459, 33621, 17163, 35033, 17871, 36453, 18583, 37881, 19299, 39317

Here it is after dividing out the prime factors 3, 5, 7, 11, 13, and 17:

53, 307, 109, 79, 457, 479, 661, 509, 2599, 277, 1073, 7061, 61, 163, 263, 3191, 1, 10841, 1913, 577, 6379, 1489, 2341, 2099, 2557, 1777, 1189, 5767, 2993, 18617, 1, 23, 10303, 1013, 1219, 22613, 3881, 163, 12319, 2813, 619, 26681, 4561, 1039, 2053, 9811, 5021, 37, 103, 10739, 16459, 1601, 1907, 35033, 851, 12151, 18583, 1403, 919, 39317

We see a couple 1s have already appeared; these are 17-smooth numbers. When we get all the way up through 43, we have:

53, 307, 109, 79, 457, 479, 661, 509, 113, 277, 1, 307, 61, 163, 263, 3191, 1, 293, 1913, 577, 6379, 1489, 2341, 2099, 2557, 1777, 1, 5767, 73, 18617, 1, 1, 10303, 1013, 53, 22613, 3881, 163, 12319, 97, 619, 26681, 4561, 1039, 2053, 9811, 5021, 1, 103, 10739, 16459, 1601, 1907, 35033, 1, 419, 18583, 61, 919, 39317

We see several numbers set to 53 or 61; these would be smooth if we raised our bound a little bit.

This sieving process is where quadratic sieve gets its name from. This drastically decreases the overall work needed to find a sufficient number of smooth numbers, making it practical for very large numbers. This basic implementation could probably handle numbers up to 50-60 digits.

Improvements and optimizations

Quadratic sieve admits a number of "bells and whistles" to dramatically improve its runtime in practice. We mention only a few of the most important ones here.

The simple row reduction method of Gaussian elimination is not able to accomodate the very large smoothness bounds needed to factor large numbers, which often range in the millions, mostly due to space limitations; such matrices, if stored explicitly, would require trillions of bits. However, this method is wasteful, because most of the entries in the matrix are zero (they must be; each number has no more than log2n prime factors). Instead of using an actual two-dimensional array, we can just keep a list for each column that lists the positions of the 1 bits in that column. We then use a method well-suited to reducing sparse matrices such as the Lanczos algorithm. This still requires a fair amount of space; it's common to use block algorithms that work on small portions of the matrix at one time, storing the rest of the matrix on disk. The matrix step is notoriously difficult to parallelize and for large problems is often done on a single high-performance supercomputer.

The most expensive step by far is the sieving, which can require scanning billions of numbers to locate the needed smooth numbers. A common trick is to only track the approximate logarithm of each number, usually in fixed-point arithmetic. Then, when visiting each number, instead of performing an expensive division we only have to subtract. This introduces a bit of rounding error into the algorithm, but that's okay; by rounding consistently in the correct direction, we can ensure that we don't miss any smooth numbers and only capture a few spurious numbers that we can quickly check and reject. Because the logarithms of small primes are small, and require visiting more numbers than any others, primes like 2 and 3 are often dropped altogether.

Another problem is that a2−n grows fairly quickly; because smaller numbers are more likely to be smooth, we get diminishing returns as we scan higher in the sequence. To get around this, we scan values of not just the sequence a2−n but also a number of similar sequences such as (Ca+b)2−n for suitable constants C, b. This variation is called the multiple polynomial quadratic sieve, since each of these sequences can be seen as the values of polynomial in a.

Finally, although the matrix step does not admit simple parallelization due to many data dependencies, the sieving step is perfectly suited to massive parallelization. Each processor or machine simply takes a portion of the sequence to scan for smooth numbers by itself, returning the small quantity of smooth numbers that it discovers to a central processor. As soon as the central processor has accumulated enough smooth numbers, it asks all the workers to stop. In the multiple polynomial variant, it's common to assign some of the polynomials to each machine.

One peculiar idea for massively parallelizing the sieving step, invented by Adi Shamir, is to use not computers but a specially constructed sieving device based on light emitters and sensors that he calls TWINKLE. The concept is that we have a light for each prime number whose intensity is proportional to the logarithm of that prime. Each light turns on just two times every p cycles, corresponding to the two square roots of n mod p. A sensor senses the combined intensity of all the lights together, and if this is close enough to the logarithm of the current value, that value is a smooth number candidate.

Conclusion

I hope this gives you all some insight into the workings of one of the most powerful factoring algorithms available, and into how unexpected algorithms and mathematics can be applied to familiar problems. Please leave any feedback, whether clarifications, corrections, complaints, or encouragement. Thanks for reading.

Comments

  • Anonymous
    June 20, 2006
    Wonderful post, as usual.

  • Anonymous
    June 21, 2006
    I do not have any comments on this article but just wanted to say that I greatly appreciate your articles. I have subscribed to your site's rss feed and eagerly wait for new articles. The previous two on image compression and color quantization were very useful to me.

    Seshagiri (HP)

  • Anonymous
    June 21, 2006
    The comment has been removed

  • Anonymous
    June 22, 2006
    Thanks for your positive feedback, everyone. I assure you that incomprehensibility was not one of my goals (in this case :-). If there's anything I can do to help clarify this discussion or answer any specific questions, I'd appreciate your feedback. I do believe the quadratic sieve algorithm is accessible to everyone interested in algorithms if just explained in the right way.

  • Anonymous
    August 28, 2006
    Hi, thanks for your article, qs is something that I whish to learn for a while ...  While reading, two questions comes to me and I would like you to explain more in detail if you can.  

    1) I still can't figure out how to find the B-smooth bound for a given n.  Is there a formula or guide to tell us how to establish the bound or do we have to guess it?

    2) How long do we have to search for smooth numbers?  What would be the quantities of smooth numbers needed in order to solve the matrix?  In you article you wrote "... we just need more numbers than prime factors ... " Is it the answer to my question?

    Claude Bissonnette  

  • Anonymous
    August 28, 2006
    Hi Claude. Those are good questions. To answer them:

    1) In the mathematical theory behind quadratic sieve, B must be chosen carefully according to a specific formula in terms of n in order to guarantee the best asymptotic running time. Carl Pomerance gives this formula:

    B = exp((1/2 + o(1))(log n log log n)^(1/2))

    http://www.math.leidenuniv.nl/~reinier/ant/sieving.pdf

    In practice, though, the B is usually somewhat less than this "ideal" B, because the matrix reduction step (benefitting from small B) is much more memory-consuming and much more difficult to parallelize than the search for smooth numbers (benefitting form large B).

    2) In order to ensure for certain that we will find a nontrivial zero, linear algebra requires that the matrix have more rows than columns - in other words, that we have more smooth numbers than prime numbers less than or equal to B. In practice, it's typical to find a nontrivial zero with quite a few less factors, and it can be profitable to attempt the reduction as soon as a heuristically "good" number of smooth numbers are found. Conversely, sometimes the matrix will only have one solution, and that solution will be trivial; in this case, a good way to look for a nontrivial solution is to just find a few more smooth numbers, which (hopefully) expands the dimension of the null space.

  • Anonymous
    August 29, 2006
    Do you have any .NET/ VB /C# code that implements Quadratic Sieve ?

  • Anonymous
    August 31, 2006
    The comment has been removed

  • Anonymous
    July 04, 2007
    In your explanation of reducing the matrix, you say that one needs "more columns than rows" to ensure a zero row.  This is incorrect (and probably just a typo), as you state in one of your responses the correct answer that you need more rows than columns.  I just thought you might want to make the correction. Also, thank you for a decent low-level description of the Quadratic Sieve and its improvements.

  • Anonymous
    November 21, 2007
    Thanks for your explanation of QS. It was very useful. I don't know why even in textbooks, authors manage to drown the fish as we say. I came up with a variant of Fermat's method that does not require incrementing a by 1. I only consider numbers of the form 6K+1 and 6k-1. Any number that is not of that form is either divisible by 2 or by 3. Factors of 2 and 3 can be easily extracted I assume leaving only a final number of the form 6k+/-1. Anyway, I am going to see if I can use the property of making a2-n values a square S. It's the only thing I wasn't aware of.

  • Anonymous
    May 20, 2008
    Thanks a billion!  This article considerably enhance my understanding toward Quadratic Sieve.

  • Anonymous
    May 30, 2008
    The comment has been removed

  • Anonymous
    May 31, 2008
    Excellent way to explain to a layman. I found it very enlightening. brings out the basics very clearly.

  • Anonymous
    July 27, 2008
    I have read this six times and the light comes on a little brighter each time!! I am doing some number theroy stuff as a hobby, and this diesn't seem to apply to what I am doing at all but it is great to attempt to understand it.

  • Anonymous
    October 20, 2008
    PingBack from http://uthz.com/2008/10/20/%e7%b4%a0%e6%95%b0%e5%88%86%e8%a7%a3/

  • Anonymous
    May 30, 2009
    PingBack from http://outdoorceilingfansite.info/story.php?id=1072

  • Anonymous
    June 17, 2009
    PingBack from http://patiosetsite.info/story.php?id=674

  • Anonymous
    June 18, 2009
    PingBack from http://thestoragebench.info/story.php?id=5411

  • Anonymous
    August 15, 2009
    Maybe this was intended to be obvious from the context, but note that raising a number to (p−1)/2 to test if it's a quadratic residue only works if p is prime. For non prime modulus, you have to raise to totient(p) / 2.

  • Anonymous
    August 16, 2009
    Actually, ignore the last sentence in my previous post, as I was confused with something else:)