The Average Character Width parameter specifies the arithmetic average of the escapement (width) of all non-zero width glyphs in the font.
Comments:
The value for xAvgCharWidth is calculated by obtaining the arithmetic average of the width of all non-zero width glyphs in the font. Furthermore, it is strongly recommended that implementers do not rely on this value for computing layout for lines of text. Especially, for cases where complex scripts are used.
usWeightClass
Format:
2-byte unsigned short
Title:
Weight class.
Description:
Indicates the visual weight (degree of blackness or thickness of strokes) of the characters in the font.
Comments:
Value
Description
C Definition (from windows.h)
100
Thin
FW_THIN
200
Extra-light (Ultra-light)
FW_EXTRALIGHT
300
Light
FW_LIGHT
400
Normal (Regular)
FW_NORMAL
500
Medium
FW_MEDIUM
600
Semi-bold (Demi-bold)
FW_SEMIBOLD
700
Bold
FW_BOLD
800
Extra-bold (Ultra-bold)
FW_EXTRABOLD
900
Black (Heavy)
FW_BLACK
usWidthClass
Format:
2-byte unsigned short
Title:
Width class.
Description:
Indicates a relative change from the normal aspect ratio (width to height ratio) as specified by a font designer for the glyphs in a font.
Comments:
Although every character in a font
may have a different numeric aspect ratio, each character in a
font of normal width has a relative aspect ratio of one. When
a new type style is created of a different width class (either
by a font designer or by some automated means) the relative aspect
ratio of the characters in the new font is some percentage greater
or less than those same characters in the normal font -- it is
this difference that this parameter specifies.
Value
Description
C Definition
% of normal
1
Ultra-condensed
FWIDTH_ULTRA_CONDENSED
50
2
Extra-condensed
FWIDTH_EXTRA_CONDENSED
62.5
3
Condensed
FWIDTH_CONDENSED
75
4
Semi-condensed
FWIDTH_SEMI_CONDENSED
87.5
5
Medium (normal)
FWIDTH_NORMAL
100
6
Semi-expanded
FWIDTH_SEMI_EXPANDED
112.5
7
Expanded
FWIDTH_EXPANDED
125
8
Extra-expanded
FWIDTH_EXTRA_EXPANDED
150
9
Ultra-expanded
FWIDTH_ULTRA_EXPANDED
200
fsType
Format:
2-byte unsigned short
Title:
Type flags.
Description:
Indicates font embedding licensing rights for the
font. Embeddable fonts may be stored in a document. When a document
with embedded fonts is opened on a system that does not have the
font installed (the remote system), the embedded font may be loaded
for temporary (and in some cases, permanent) use on that system
by an embedding-aware application. Embedding licensing rights
are granted by the vendor of the font.
The OpenType Font Embedding DLL Specification and DLL
release notes describe the APIs used to implement support for
OpenType font embedding and loading. Applications that implement
support for font embedding, either through use of the Font Embedding
DLL or through other means, must not embed fonts which are not
licensed to permit embedding. Further, applications loading embedded
fonts for temporary use (see Preview & Print and Editable
embedding below) must delete the fonts when the document
containing the embedded font is closed.
This version of the OS/2 table makes bits 0 - 3 a set of exclusive bits. In other words, at most one bit in this range may be set at a time. The purpose is to remove misunderstandings caused by previous behavior of using the least restrictive of the bits that are set.
Bit
Bit Mask
Description
0x0000
Installable Embedding: No fsType bit is set. Thus fsType is zero.
Fonts with this setting indicate that they may be embedded and permanently installed on the remote system by an application. The user of the remote system acquires the identical rights, obligations and licenses for that font as the original purchaser of the font, and is subject to the same end-user license agreement, copyright, design patent, and/or trademark as was the original purchaser.
0
0x0001
Reserved, must be zero.
1
0x0002
Restricted License embedding:
Fonts that have only this bit set must not be modified, embedded or exchanged in any manner without first obtaining permission of the legal owner. Caution: For Restricted License embedding to take effect, it must be the only level of embedding selected.
2
0x0004
Preview & Print embedding: When this bit is set, the font may be embedded, and temporarily loaded on the remote system. Documents containing Preview & Print fonts must be opened "read-only;" no edits can be applied to the document.
3
0x0008
Editable embedding: When this bit is set, the font may be embedded but must only be installed temporarily on other systems. In contrast to Preview
& Print fonts, documents containing Editable fonts may be opened for reading, editing is permitted, and changes may be saved.
4-7
Reserved, must be zero.
8
0x0100
No subsetting: When this bit is set, the font may not be subsetted prior to embedding. Other embedding restrictions specified in bits 0-3 and 9 also apply.
9
0x0200
Bitmap embedding only: When this bit is set, only bitmaps contained in the font may be embedded. No outline data may be embedded. If there are no bitmaps available in the font, then the font is considered unembeddable and the embedding services will fail. Other embedding restrictions specified in bits 0-3 and 8 also apply.
10-15
Reserved, must be zero.
ySubscriptXSize
Format:
2-byte signed short
Units:
Font design units
Title:
Subscript horizontal font size.
Description:
The recommended horizontal
size in font design units for subscripts for this font.
Comments:
If a font has two recommended sizes for subscripts,
e.g., numerics and other, the numeric sizes should be stressed.
This size field maps to the em square size of the font being used
for a subscript. The horizontal font size specifies a font designer’s
recommended horizontal font size for subscript characters associated
with this font. If a font does not include all of the required
subscript characters for an application, and the application can
substitute characters by scaling the character of a font or by
substituting characters from another font, this parameter specifies
the recommended em square for those subscript characters.
For example, if the em square for a font is 2048 and ySubScriptXSize
is set to 205, then the horizontal size for a simulated subscript
character would be 1/10th the size of the normal character.
ySubscriptYSize
Format:
2-byte signed short
Units:
Font design units
Title:
Subscript vertical font size.
Description:
The recommended vertical
size in font design units for subscripts for this font.
Comments:
If a font has two recommended sizes for subscripts,
e.g. numerics and other, the numeric sizes should be stressed.
This size field maps to the emHeight of the font being used for
a subscript. The horizontal font size specifies a font designer’s
recommendation for horizontal font size of subscript characters
associated with this font. If a font does not include all of
the required subscript characters for an application, and the
application can substitute characters by scaling the characters
in a font or by substituting characters from another font, this
parameter specifies the recommended horizontal EmInc for those
subscript characters.
For example, if the em square for a font is 2048 and ySubScriptYSize
is set to 205, then the vertical size for a simulated subscript
character would be 1/10th the size of the normal character.
ySubscriptXOffset
Format:
2-byte signed short
Units:
Font design units
Title:
Subscript x offset.
Description:
The recommended horizontal
offset in font design untis for subscripts for this font.
Comments:
The Subscript X Offset parameter specifies a font designer’s
recommended horizontal offset -- from the character origin of
the font to the character origin of the subscript’s character
-- for subscript characters associated with this font. If a font
does not include all of the required subscript characters for
an application, and the application can substitute characters,
this parameter specifies the recommended horizontal position from
the character escapement point of the last character before the
first subscript character. For upright characters, this value
is usually zero; however, if the characters of a font have an
incline (italic characters) the reference point for subscript
characters is usually adjusted to compensate for the angle of
incline.
ySubscriptYOffset
Format:
2-byte signed short
Units:
Font design units
Title:
Subscript y offset.
Description:
The recommended vertical offset in font design units
from the baseline for subscripts for this font.
Comments:
The Subscript Y Offset parameter specifies a font designer’s
recommended vertical offset from the character baseline to the
character baseline for subscript characters associated with this
font. Values are expressed as a positive offset below the character
baseline. If a font does not include all of the required subscript
for an application, this parameter specifies the recommended vertical
distance below the character baseline for those subscript characters.
ySuperscriptXSize
Format:
2-byte signed short
Units:
Font design units
Title:
Superscript horizontal font
size.
Description:
The recommended horizontal
size in font design units for superscripts for this font.
Comments:
If a font has two recommended sizes for subscripts,
e.g., numerics and other, the numeric sizes should be stressed.
This size field maps to the em square size of the font being used
for a subscript. The horizontal font size specifies a font designer’s
recommended horizontal font size for superscript characters associated
with this font. If a font does not include all of the required
superscript characters for an application, and the application
can substitute characters by scaling the character of a font or
by substituting characters from another font, this parameter specifies
the recommended em square for those superscript characters.
For example, if the em square for a font is 2048 and ySuperScriptXSize
is set to 205, then the horizontal size for a simulated superscript
character would be 1/10th the size of the normal character.
ySuperscriptYSize
Format:
2-byte signed short
Units:
Font design units
Title:
Superscript vertical font size.
Description:
The recommended vertical
size in font design units for superscripts for this font.
Comments:
If a font has two recommended sizes for subscripts,
e.g., numerics and other, the numeric sizes should be stressed.
This size field maps to the emHeight of the font being used for
a subscript. The vertical font size specifies a font designer’s
recommended vertical font size for superscript characters associated
with this font. If a font does not include all of the required
superscript characters for an application, and the application
can substitute characters by scaling the character of a font or
by substituting characters from another font, this parameter specifies
the recommended EmHeight for those superscript characters.
For example, if the em square for a font is 2048 and ySuperScriptYSize
is set to 205, then the vertical size for a simulated superscript
character would be 1/10th the size of the normal character.
ySuperscriptXOffset
Format:
2-byte signed short
Units:
Font design units
Title:
Superscript x offset.
Description:
The recommended horizontal
offset in font design units for superscripts for this font.
Comments:
The Superscript X Offset parameter specifies a font
designer’s recommended horizontal offset -- from the character
origin to the superscript character’s origin for the superscript
characters associated with this font. If a font does not include
all of the required superscript characters for an application,
this parameter specifies the recommended horizontal position from
the escapement point of the character before the first superscript
character. For upright characters, this value is usually zero;
however, if the characters of a font have an incline (italic characters)
the reference point for superscript characters is usually adjusted
to compensate for the angle of incline.
ySuperscriptYOffset
Format:
2-byte signed short
Units:
Font design units
Title:
Superscript y offset.
Description:
The recommended vertical offset in font design units
from the baseline for superscripts for this font.
Comments:
The Superscript Y Offset parameter specifies a font
designer’s recommended vertical offset -- from the character baseline
to the superscript character’s baseline associated with this font.
Values for this parameter are expressed as a positive offset
above the character baseline. If a font does not include all
of the required superscript characters for an application, this
parameter specifies the recommended vertical distance above the
character baseline for those superscript characters.
yStrikeoutSize
Format:
2-byte signed short
Units:
Font design units
Title:
Strikeout size.
Description:
Width of the strikeout
stroke in font design units.
Comments:
This field should normally be the width of the em dash
for the current font. If the size is one, the strikeout line will
be the line represented by the strikeout position field. If the
value is two, the strikeout line will be the line represented
by the strikeout position and the line immediately above
the strikeout position. For a Roman font with a 2048 em square,
102 is suggested.
yStrikeoutPosition
Format:
2-byte signed short
Units:
Font design units
Title:
Strikeout position.
Description:
The position of the top of the strikeout
stroke relative to the baseline in font design units.
Comments:
Positive values represent distances above the baseline,
while negative values represent distances below the baseline.
A value of zero falls directly on the baseline, while a value
of one falls one pel above the baseline. The value of strikeout
position should not interfere with the recognition of standard
characters, and therefore should not line up with crossbars in
the font. For a Roman font with a 2048 em square, 460 is suggested.
sFamilyClass
Format:
2-byte signed short
Title:
Font-family class and subclass.
Description:
This parameter is a classification
of font-family design.
Comments:
The font class and font subclass are registered values
assigned by IBM to each font family. This parameter is intended
for use in selecting an alternate font when the requested font
is not available. The font class is the most general and the font
subclass is the most specific. The high byte of this field contains
the family class, while the low byte contains the family subclass. More information about this field.
Panose
Format:
10 byte array
Title:
PANOSE classification number
International:
Additional specifications are required for PANOSE
to classify non-Latin character sets.
Description:
This 10 byte series of numbers is used to describe
the visual characteristics of a given typeface. These characteristics
are then used to associate the font with other fonts of similar
appearance having different names. The variables for each digit
are listed below. The Panose values are fully described in the Panose “greybook” reference, currently owned by Agfa-Monotype.
Comments:
The PANOSE definition contains ten digits each of which
currently describes up to sixteen variations. Windows uses
bFamilyType, bSerifStyle and bProportion in the font mapper to
determine family type. It also uses bProportion to determine
if the font is monospaced. If the font is a symbol font, the first byte of the PANOSE number (bFamilyType) must be set to "pictorial." Good PANOSE values in fonts are very valuable to users of the Windows fonts folder. The specification for assigning PANOSE values is located at https://monotype.github.io/panose/
This field is used to specify the Unicode
blocks or ranges encompassed by the font file in the 'cmap' subtable
for platform 3, encoding ID 1 (Microsoft platform). If the bit
is set (1) then the Unicode range is considered functional. If
the bit is clear (0) then the range is not considered functional.
Each of the bits is treated as an independent flag and the bits
can be set in any combination. The determination of "functional"
is left up to the font designer, although character set selection
should attempt to be functional by ranges if at all possible.
All reserved fields must be zero. Each long is in Big-Endian
form. See the Basic Multilingual Plane of ISO/IEC 10646-1 or the
Unicode Standard v.3.0 for the list of Unicode ranges and characters.
Bit
Description
0
Basic Latin
1
Latin-1 Supplement
2
Latin Extended-A
3
Latin Extended-B
4
IPA Extensions
5
Spacing Modifier Letters
6
Combining Diacritical Marks
7
Greek and Coptic
8
Reserved for Unicode SubRanges
9
Cyrillic
Cyrillic Supplementary
10
Armenian
11
Hebrew
12
Reserved for Unicode SubRanges
13
Arabic
14
Reserved for Unicode SubRanges
15
Devanagari
16
Bengali
17
Gurmukhi
18
Gujarati
19
Oriya
20
Tamil
21
Telugu
22
Kannada
23
Malayalam
24
Thai
25
Lao
26
Georgian
27
Reserved for Unicode SubRanges
28
Hangul Jamo
29
Latin Extended Additional
30
Greek Extended
31
General Punctuation
32
Superscripts And Subscripts
33
Currency Symbols
34
Combining Diacritical Marks For Symbols
35
Letterlike Symbols
36
Number Forms
37
Arrows
Supplemental Arrows-A
Supplemental Arrows-B
38
Mathematical Operators
Supplemental Mathematical Operators
Miscellaneous Mathematical Symbols-A
Miscellaneous Mathematical Symbols-B
39
Miscellaneous Technical
40
Control Pictures
41
Optical Character Recognition
42
Enclosed Alphanumerics
43
Box Drawing
44
Block Elements
45
Geometric Shapes
46
Miscellaneous Symbols
47
Dingbats
48
CJK Symbols And Punctuation
49
Hiragana
50
Katakana
Katakana Phonetic Extensions
51
Bopomofo
Bopomofo Extended
52
Hangul Compatibility Jamo
53
Reserved for Unicode SubRanges
54
Enclosed CJK Letters And Months
55
CJK Compatibility
56
Hangul Syllables
57
Non-Plane 0 *
58
Reserved for Unicode SubRanges
59
CJK Unified Ideographs
CJK Radicals Supplement
Kangxi Radicals
Ideographic Description Characters
CJK Unified Ideograph Extension A
CJK Unified Ideographs Extension B
Kanbun
60
Private Use Area
61
CJK Compatibility Ideographs
CJK Compatibility Ideographs Supplement
62
Alphabetic Presentation Forms
63
Arabic Presentation Forms-A
64
Combining Half Marks
65
CJK Compatibility Forms
66
Small Form Variants
67
Arabic Presentation Forms-B
68
Halfwidth And Fullwidth Forms
69
Specials
70
Tibetan
71
Syriac
72
Thaana
73
Sinhala
74
Myanmar
75
Ethiopic
76
Cherokee
77
Unified Canadian Aboriginal Syllabics
78
Ogham
79
Runic
80
Khmer
81
Mongolian
82
Braille Patterns
83
Yi Syllables
Yi Radicals
84
Tagalog
Hanunoo
Buhid
Tagbanwa
85
Old Italic
86
Gothic
87
Deseret
88
Byzantine Musical Symbols
Musical Symbols
89
Mathematical Alphanumeric Symbols
90
Private Use (plane 15)
Private Use (plane 16)
91
Variation Selectors
92
Tags
93-127
Reserved for Unicode SubRanges
Note:
* Setting bit 57 implies that there is at least one codepoint beyond the Basic Multilingual Plane that is supported by this font.
achVendID
Format:
4-byte character array
Title:
Font Vendor Identification
Description:
The four character identifier
for the vendor of the given type face.
Comments:
This is not the royalty owner of the original artwork.
This is the company responsible for the marketing and distribution
of the typeface that is being classified. It is reasonable to
assume that there will be 6 vendors of ITC Zapf Dingbats for use
on desktop platforms in the near future (if not already). It
is also likely that the vendors will have other inherent benefits
in their fonts (more kern pairs, unregularized data, hand hinted,
etc.). This identifier will allow for the correct vendor’s type
to be used over another, possibly inferior, font file. The Vendor
ID value is not required.
Microsoft has assigned values for some font suppliers as listed
below. Uppercase vendor ID’s are reserved by Microsoft. Other
suppliers can choose their own mixed case or lowercase ID’s, or
leave the field blank.
Contains information concerning
the nature of the font patterns, as follows:
Bit #
macStyle bit
C definition
Description
0
bit 1
ITALIC
Font contains Italic characters, otherwise they are upright.
1
UNDERSCORE
Characters are underscored.
2
NEGATIVE
Characters have their foreground and background reversed.
3
OUTLINED
Outline (hollow) characters, otherwise they are solid.
4
STRIKEOUT
Characters are overstruck.
5
bit 0
BOLD
Characters are emboldened.
6
REGULAR
Characters are in the standard weight/style for the font.
Comments:
All undefined bits must be
zero.
This field contains information on the original design of the
font. Bits 0 & 5 can be used to determine if the font was
designed with these features or whether some type of machine simulation
was performed on the font to achieve this appearance. Bits 1-4
are rarely used bits that indicate the font is primarily a decorative
or special purpose font.
If bit 6 is set, then bits 0 and 5 must be clear, else the behavior
is undefined. As noted above, the settings of bits 0 and 1 must
be reflected in the macStyle bits in the 'head' table. While bit
6 on implies that bits 0 and 1 of macStyle are clear (along with
bits 0 and 5 of fsSelection), the reverse is not true. Bits 0
and 1 of macStyle (and 0 and 5 of fsSelection) may be clear and
that does not give any indication of whether or not bit 6 of fsSelection
is clear (e.g., Arial Light would have all bits cleared; it is
not the regular version of Arial).
usFirstCharIndex
Format:
2-byte USHORT
Description:
The minimum Unicode index (character code) in this
font, according to the cmap subtable for platform ID 3 and platform- specific encoding
ID 0 or 1. For most fonts supporting Win-ANSI or other character
sets, this value would be 0x0020. This field cannot represent supplementary character values (codepoints greater than 0xFFFF). Fonts that support supplementary characters should set the value in this field to 0xFFFF if the minimum index value is a supplementary character.
usLastCharIndex
Format:
2-byte USHORT
Description:
The maximum Unicode index (character code) in this
font, according to the cmap subtable for platform ID 3 and encoding
ID 0 or 1. This value depends on which character sets the font
supports. This field cannot represent supplementary character values (codepoints greater than 0xFFFF). Fonts that support supplementary characters should set the value in this field to 0xFFFF.
sTypoAscender
Format:
SHORT
Description:
The typographic ascender for this font. Remember
that this is not the same as the Ascender value in the 'hhea'
table, which Apple defines in a far different manner. One good
source for sTypoAscender in Latin based fonts is the Ascender value from an AFM file. For CJK fonts see below.
The suggested usage for sTypoAscender is that it be used in
conjunction with unitsPerEm to compute a typographically correct
default line spacing. The goal is to free applications from Macintosh
or Windows-specific metrics which are constrained by backward
compatibility requirements. These new metrics, when combined with
the character design widths, will allow applications to lay out
documents in a typographically correct and portable fashion. These
metrics will be exposed through Windows APIs. Macintosh applications
will need to access the 'sfnt' resource and parse it to extract
this data from the "OS/2" table.
For CJK (Chinese, Japanese, and Korean) fonts that are intended to be used for vertical writing (in addition to horizontal writing), the required value for sTypoAscender is that which describes the top of the of the ideographic em-box. For example, if the ideographic em-box of the font extends from coordinates 0,-120 to 1000,880 (that is, a 1000x1000 box set 120 design units below the Latin baseline), then the value of sTypoAscender must be set to 880. Failing to adhere to these requirements will result in incorrect vertical layout.
The typographic descender for this font. Remember
that this is not the same as the Descender value in the 'hhea'
table, which Apple defines in a far different manner. One good
source for sTypoDescender in Latin based fonts is the Descender value from an AFM
file. For CJK fonts see below.
The suggested usage for sTypoDescender is that it be used in
conjunction with unitsPerEm to compute a typographically correct
default line spacing. The goal is to free applications from Macintosh
or Windows-specific metrics which are constrained by backward
compatability requirements. These new metrics, when combined with
the character design widths, will allow applications to lay out
documents in a typographically correct and portable fashion. These
metrics will be exposed through Windows APIs. Macintosh applications
will need to access the 'sfnt' resource and parse it to extract
this data from the "OS/2" table (unless Apple exposes
the 'OS/2' table through a new API).
For CJK (Chinese, Japanese, and Korean) fonts that are intended to be used for vertical writing (in addition to horizontal writing), the required value for sTypoDescender is that which describes the bottom of the of the ideographic em-box. For example, if the ideographic em-box of the font extends from coordinates 0,-120 to 1000,880 (that is, a 1000x1000 box set 120 design units below the Latin baseline), then the value of sTypoDescender must be set to -120. Failing to adhere to these requirements will result in incorrect vertical layout.
The typographic line gap for this font. Remember
that this is not the same as the LineGap value in the 'hhea' table,
which Apple defines in a far different manner.
The suggested usage for usTypoLineGap is that it be used in
conjunction with unitsPerEm to compute a typographically correct
default line spacing. Typical values average 7-10% of units per
em. The goal is to free applications from Macintosh or Windows-specific
metrics which are constrained by backward compatability requirements
(see chapter, "Recommendations for OpenType Fonts"). These
new metrics, when combined with the character design widths, will
allow applications to lay out documents in a typographically correct
and portable fashion. These metrics will be exposed through Windows
APIs. Macintosh applications will need to access the 'sfnt' resource
and parse it to extract this data from the "OS/2" table
(unless Apple exposes the 'OS/2' table through a new API)
usWinAscent
Format:
2-byte USHORT
Description:
The ascender metric for Windows. This, too, is distinct
from Apple’s Ascender value and from the usTypoAscender values.
usWinAscent is computed as the yMax for all characters in the
Windows ANSI character set. usWinAscent is used to compute the
Windows font height and default line spacing. For platform 3 encoding
0 fonts, it is the same as yMax. Windows will clip the bitmap of any portion of a glyph that appears above this value. Some applications use this value to determine default line spacing. This is strongly discouraged. The typographic ascender, descender and line gap fields in conjunction with unitsPerEm should be used for this purpose. Developers should set this field keeping the above factors in mind.
If any clipping is unacceptable, then the value should be set to yMax.
However, if a developer desires to provide appropriate default line spacing using this field, for those applications that continue to use this field for doing so (against OpenType recommendations), then the value should be set appropriately. In such a case, it may result in some glyph bitmaps being clipped.
usWinDescent
Format:
2-byte USHORT
Description:
The descender metric for Windows. This, too, is distinct
from Apple’s Descender value and from the usTypoDescender values.
usWinDescent is computed as the -yMin for all characters in the
Windows ANSI character set. usWinDescent is used to compute the
Windows font height and default line spacing. For platform 3 encoding
0 fonts, it is the same as -yMin. Windows will clip the bitmap of any portion of a glyph that appears below this value. Some applications use this value to determine default line spacing. This is strongly discouraged. The typographic ascender, descender and line gap fields in conjunction with unitsPerEm should be used for this purpose. Developers should set this field keeping the above factors in mind.
If any clipping is unacceptable, then the value should be set to yMin.
However, if a developer desires to provide appropriate default line spacing using this field, for those applications that continue to use this field for doing so (against OpenType recommendations), then the value should be set appropriately. In such a case, it may result in some glyph bitmaps being clipped.
This field is used to specify the code pages
encompassed by the font file in the 'cmap' subtable for platform
3, encoding ID 1 (Microsoft platform). If the font file is encoding
ID 0, then the Symbol Character Set bit should be set. If the
bit is set (1) then the code page is considered functional. If
the bit is clear (0) then the code page is not considered functional.
Each of the bits is treated as an independent flag and the bits
can be set in any combination. The determination of "functional"
is left up to the font designer, although character set selection
should attempt to be functional by code pages if at all possible.
Symbol character sets have a special meaning. If the symbol bit
(31) is set, and the font file contains a 'cmap' subtable for
platform of 3 and encoding ID of 1, then all of the characters
in the Unicode range 0xF000 - 0xF0FF (inclusive) will be used
to enumerate the symbol character set. If the bit is not set,
any characters present in that range will not be enumerated as
a symbol character set.
All reserved fields must be zero. Each long is in Big-Endian
form.
Bit
Code Page
Description
0
1252
Latin 1
1
1250
Latin 2: Eastern Europe
2
1251
Cyrillic
3
1253
Greek
4
1254
Turkish
5
1255
Hebrew
6
1256
Arabic
7
1257
Windows Baltic
8
1258
Vietnamese
9-15
Reserved for Alternate ANSI
16
874
Thai
17
932
JIS/Japan
18
936
Chinese: Simplified chars--PRC and Singapore
19
949
Korean Wansung
20
950
Chinese: Traditional chars--Taiwan and Hong Kong
21
1361
Korean Johab
22-28
Reserved for Alternate ANSI & OEM
29
Macintosh Character Set (US Roman)
30
OEM Character Set
31
Symbol Character Set
32-47
Reserved for OEM
48
869
IBM Greek
49
866
MS-DOS Russian
50
865
MS-DOS Nordic
51
864
Arabic
52
863
MS-DOS Canadian French
53
862
Hebrew
54
861
MS-DOS Icelandic
55
860
MS-DOS Portuguese
56
857
IBM Turkish
57
855
IBM Cyrillic; primarily Russian
58
852
Latin 2
59
775
MS-DOS Baltic
60
737
Greek; former 437 G
61
708
Arabic; ASMO 708
62
850
WE/Latin 1
63
437
US
sxHeight
Format:
SHORT
Description:
This metric specifies the distance between the baseline and the approximate height of non-ascending lowercase letters measured in FUnits. This value would normally be specified by a type designer but in situations where that is not possible, for example when a legacy font is being converted, the value may be set equal to the top of the unscaled and unhinted glyph bounding box of the glyph encoded at U+0078 (LATIN SMALL LETTER X). If no glyph is encoded in this position the field should be set to 0.
This metric, if specified, can be used in font substitution: the xHeight
value of one font can be scaled to approximate the apparent size of another.
sCapHeight
Format:
SHORT
Description:
This metric specifies the distance between the baseline and the approximate height of uppercase letters measured in FUnits. This value would normally be specified by a type designer but in situations where that is not possible, for example when a legacy font is being converted, the value may be set equal to the top of the unscaled and unhinted glyph bounding box of the glyph encoded at U+0048 (LATIN CAPITAL LETTER H). If no glyph is encoded in this position the field should be set to 0.
This metric, if specified, can be used in systems that specify type size by capital height measured in millimeters. It can also be used as an alignment metric; the top of a drop capital, for instance, can be aligned to the sCapHeight metric of the first line of text.
usDefaultChar
Format:
USHORT
Description:
Whenever a request is made for a character that is not in the font, Windows provides this default character. If the value of this field is zero, glyph ID 0 is to be used for the default character otherwise this is the Unicode encoding of the glyph that Windows uses as the default character. This field cannot represent supplementary character values (codepoints greater than 0xFFFF).
usBreakChar
Format:
USHORT
Description:
This is the Unicode encoding of the glyph that Windows uses as the break character. The break character is used to separate words and justify text. Most fonts specify ‘space’ as the break character. This field cannot represent supplementary character values (codepoints greater than 0xFFFF).
usMaxContext
Format:
USHORT
Description:
The maximum length of a target glyph context for any feature in this font. For example, a font which has only a pair kerning feature should set this field to 2. If the font also has a ligature feature in which the glyph sequence ‘f f i’ is substituted by the ligature ‘ffi’, then this field should be set to 3. This field could be useful to sophisticated line-breaking engines in determining how far they should look ahead to test whether something could change that effects the line breaking. For chaining contextual lookups, the length of the string (covered glyph) + (input sequence) + (lookahead sequence) should be considered.
Colabore connosco no GitHub
A origem deste conteúdo pode ser encontrada no GitHub, onde também pode criar e rever problemas e pedidos Pull. Para mais informações, consulte o nosso guia do contribuidor.