t:TRANSITIONFILTER Element | transitionFilter Object

This topic documents a feature of HTML+TIME 2.0, which is obsolete as of Windows Internet Explorer 9.

Animates the progress of a transition on an element or elements with renderable content.

Members Table

The following table lists the members exposed by the transitionFilter object.

Attribute	Property	Description
ACCELERATE	accelerate	Sets or gets a value that applies an acceleration to an element timeline.
ACCUMULATE	accumulate	Sets or gets a value that indicates whether the animation is cumulative.
ADDITIVE	additive	Sets or gets a value that indicates whether the animation is additive with other animations.
AUTOREVERSE	autoReverse	Sets or gets whether the timeline on an element begins playing in reverse immediately after it completes in the forward direction.
BEGIN	begin	Sets or gets the delay time before the timeline begins playing on the element.
BY	by	Specifies a relative offset value for the progress of the transitionFilter element.
CALCMODE	calcMode	Sets or gets the interpolation mode for the progress of the transitionFilter element.
DECELERATE	decelerate	Sets or gets a value that applies a deceleration to the end of a simple duration.
DUR	dur	Sets or gets a value indicating the amount of time that a transition is applied to an element.
END	end	Sets or gets a value indicating the end time for the element, or the end of the simple duration when the element is set to repeat.
FROM	from	Sets or gets a progress value indicating the point from which to begin the transition.
KEYSPLINES	keySplines	Sets or gets a set of Bezier control points that define the interval pacing of an animation.
KEYTIMES	keyTimes	Sets or gets a list of time values used to control the pacing of an animation.
MODE	mode	Sets or gets a variable that indicates whether an element transitions in or out. Sets or gets a variable that indicates whether an element transitions in or out.
REPEATCOUNT	repeatCount	Sets or gets the number of times an element timeline repeats.
REPEATDUR	repeatDur	Sets or gets the number of seconds that an element timeline repeats. Sets or gets the number of seconds that an element timeline repeats.
RESTART	restart	Sets or gets the conditions under which an element can be restarted on a timeline.
SPEED	speed	Sets or gets the playback speed of an element relative to its parent time container.
SUBTYPE	subtype	Sets or gets the name of the subtype that will be applied to the transition.
TARGETELEMENT	targetElement	Sets or gets the target element to be animated.
TO	to	Sets or retrieves a value that indicates the point in the transition's progress at which the transition ends.
TYPE	type	Sets or gets the type of transition to be applied. Sets or gets the type of transition to be applied.
VALUES	values	Sets or retrieves a list of one or more values specifying the progress of the transition.

Event Property	Description
onbegin	Fires when the timeline starts on an element.
onend	Fires when the timeline stops on an element.
onpause	Fires when the timeline on an element pauses.
onrepeat	Fires when the timeline repeats on an element, beginning with the second iteration.
onresume	Fires when an element's timeline resumes from a paused state.
onreverse	Fires when the timeline on an element begins to play backward.
onseek	Fires whenever a seek operation is performed on the element.

Method	Description
activeTimeToParentTime	Converts a value in the element's active timeline to the corresponding point in the parent timeline.
activeTimeToSegmentTime	Converts a value in the element's active timeline to the corresponding point in the segment timeline.
beginElement	Starts the element on the timeline.
beginElementAt	Starts an element's timeline at the specified time.
documentTimeToParentTime	Converts a value in the document timeline to the corresponding point in the element's parent timeline.
endElement	Stops the element on the timeline.
endElementAt	Ends an element's timeline at the specified time.
parentTimeToActiveTime	Converts a value in the parent timeline to the corresponding point in the element's active timeline.
parentTimeToDocumentTime	Converts a value in the element's parent timeline to the corresponding point in the document timeline.
pauseElement	Stops playing an element's timeline at the current point.
resumeElement	Restarts the element's timeline from a paused state.
seekActiveTime	Locates a specified point on the element's active timeline and begins playing from that point. Locates a specified point on the element's active timeline and begins playing from that point.
seekSegmentTime	Locates the specified point on the element's segment timeline, and begins playing from that point.
seekTo	Locates a specified point on the element's segment timeline, including repetitions, and begins playing from that point.
segmentTimeToActiveTime	Converts a value in the element's segment timeline to the corresponding point in the element's active timeline.
segmentTimeToSimpleTime	Converts a value in the element's segment timeline to the corresponding point in the element's simple timeline.
simpleTimeToSegmentTime	Converts a value in the element's simple timeline to the corresponding point in the element's segment timeline.

Object	Description
currTimeState	Contains information about an HTML+TIME timeline.

Remarks

transitionFilter was introduced in Microsoft Internet Explorer 6

The prefix t: is used to associate this element with an XML namespace. You must declare the XML namespace in the html tag of your document when using this element.

<HTML XMLNS:t ="urn:schemas-microsoft-com:time">

You must then import the tag definitions from the time2 behavior by using the IMPORT processing instruction.

<?IMPORT namespace="t" implementation="#default#time2">

The members listed in the following table might not be accessible through scripting until the window. onload event fires. Waiting for this event to fire ensures that the document is completely loaded, that all behaviors have been applied to corresponding elements on the document , and that all the behavior's properties, methods, and events are available for scripting. Using any of the behavior-defined members before the window. onload event fires could result in a scripting error, indicating that the object does not support that particular member.

This element is not rendered.

This element requires a closing tag.

Examples

This example demonstrates the effects of changing various attributes of the transitionFilter.

Code example: http://samples.msdn.microsoft.com/workshop/samples/author/behaviors/htmltime/transitions/mastersample/master_sample.htm

This example shows how to use the transitionFilter to transition an element in and out of view.

<HTML XMLNS:t = "urn:schemas-microsoft-com:time">
<HEAD>
  <STYLE>
    .time    {behavior: url(#default#time2);}
  </STYLE>
  <?import namespace = t urn = "urn:schemas-microsoft-com:time" 
    implementation = "#default#time2" />
</HEAD>
<BODY>

<DIV STYLE="width:270" CLASS="time" DUR="8" ID="oDiv">
<t:TRANSITIONFILTER BEGIN="oDiv.begin" DUR="3" TYPE="clockWipe"/>
<t:TRANSITIONFILTER BEGIN="oDiv.end-3" DUR="3" MODE="out" TYPE="fade"/>
This DIV Transitions In, Stays For Two Seconds, And Then Transitions Out.
</DIV>
</BODY>
</HTML>

Code example: http://samples.msdn.microsoft.com/workshop/samples/author/behaviors/htmltime/transitions/ovwMode1.htm

See Also

Introduction to HTML+TIME, Using HTML+TIME Transitions, time2