Set-SCVirtualDiskDrive

Artigo
01/03/2016

Set-SCVirtualDiskDrive

Modifies settings of a virtual disk drive object on a virtual machine or on a virtual machine template in a VMM environment.

Syntax

Parameter Set: BusChanges
Set-SCVirtualDiskDrive -VirtualDiskDrive <VirtualDiskDrive> [-Bus <Byte> ] [-CreateDiffDisk <Boolean> ] [-IDE] [-JobGroup <Guid]> ] [-JobVariable <String> ] [-LUN <Byte> ] [-OnBehalfOfUser <System.String> ] [-OnBehalfOfUserRole <Microsoft.SystemCenter.VirtualMachineManager.UserRole> ] [-PROTipID <Guid]> ] [-RunAsynchronously] [-SCSI] [-SharedStorage <Boolean> ] [-StorageClassification <StorageClassification> ] [-VolumeType <VolumeType> {None | Boot | System | BootAndSystem} ] [ <CommonParameters>]

Detailed Description

The Set-SCVirtualDiskDrive cmdlet modifies settings of a virtual disk drive object on a virtual machine or on a virtual machine template in a Virtual Machine Manager (VMM) environment. You can use this cmdlet to change the Bus type (IDE or SCSI), or to change the Bus and LUN settings to connect a virtual disk drive to a different location on the bus.

Parameters

-Bus<Byte>

Specifies the IDE bus to which to attach a virtual disk drive or virtual DVD drive, or the SCSI bus to which to attach a virtual disk drive.

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-CreateDiffDisk<Boolean>

Indicates whether the cmdlet creates a differencing disk.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-IDE

Specifies IDE as the bus type to which to attach a virtual disk drive object or a virtual DVD drive object configured on a virtual machine or on a template.

Example format: -IDE –Bus 0 –LUN 1

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-JobGroup<Guid]>

Specifies an identifier for a series of commands that will run as a set just before the final command that includes the same job group identifier runs.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-JobVariable<String>

Specifies that job progress is tracked and stored in the variable named by this parameter.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-LUN<Byte>

Specifies the logical unit number (LUN) for a virtual disk drive object or for a virtual DVD drive object on an IDE bus, or for a virtual disk drive object on a SCSI bus.

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-OnBehalfOfUser<System.String>

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-OnBehalfOfUserRole<Microsoft.SystemCenter.VirtualMachineManager.UserRole>

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PROTipID<Guid]>

Specifies the ID of the PRO tip that triggered this action. This allows for auditing of PRO tips.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-RunAsynchronously

Indicates that the job runs asynchronously so that control returns to the command shell immediately.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-SCSI

Specifies SCSI as the bus type to which to attach a virtual disk drive object configured on a virtual machine or on a template.

Example format: -SCSI -Bus 0 -LUN 0

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-SharedStorage<Boolean>

Indicates whether the object uses shared storage.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-StorageClassification<StorageClassification>

Specifies a storage classification object.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-VirtualDiskDrive<VirtualDiskDrive>

Specifies a virtual disk drive object. You can attach either a virtual hard disk (for a virtual machine on any host) or a pass-through disk (for a virtual machine on a Hyper-V host or an ESX host) to a virtual disk drive object.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-VolumeType<VolumeType>

Specifies the volume type for a virtual hard disk. Valid values:

-- Boot
-- System
-- BootAndSystem
-- None

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

Outputs

The output type is the type of the objects that the cmdlet emits.

VirtualDiskDrive

Notes

This cmdlet requires a VMM virtual disk drive object, which can be retrieved by using the Get-SCVirtualDiskDrive cmdlet.

Examples

Example 1: Change the IDE bus and LUN settings for a virtual disk drive on a virtual machine

The first command gets the virtual machine object VM01, and then stores the object in the $VM variable.

The second command gets the virtual disk drive object on VM01, and then stores the object in $VirtDiskDrive. Using the @ symbol and parentheses ensures that the command stores the results in an array in case the command returns a single object or $Null.

The last command sets the Bus value to 0 and sets the LUN value to 0 for the virtual disk drive on VM01 if the virtual machine has only one virtual disk drive and is located on the second slot of the first IDE channel.

PS C:\> $VM = Get-SCVirtualMachine -Name "VM01"
PS C:\> $VirtDiskDrive = @(Get-SCVirtualDiskDrive -VM $VM)
PS C:\> if($VirtDiskDrive.Count -eq 1 -and $VirtDiskDrive[0].Bus -eq 0 -and $VirtDiskDrive[0].Lun -eq 1){Set-SCVirtualDiskDrive -VirtualDiskDrive $VirtDiskDrive[0] -Bus 0 -LUN 0}

Example 2: Change the bus type for a virtual disk drive from SCSI to IDE

The first command gets the virtual machine object named VM02, and then stores the object in the $VM variable.

The second command gets all virtual disk drive objects configured for the virtual machine stored in $VM and stores the virtual disk drive objects in the $VirtDiskDrive object array. This example assumes that the virtual disk drive is on a SCSI bus.

The last command sets the Bus type to IDE and connects the second virtual disk drive, specified by $VirtDiskDrive[1], to Primary Channel (1) and slot 2, specified by Bus 0 and LUN 1.

PS C:\> $VM = Get-SCVirtualMachine -Name "VM02"
PS C:\> $VirtDiskDrive = Get-SCVirtualDiskDrive -VM $VM
PS C:\> Set-SCVirtualDiskDrive -VirtualDiskDrive $VirtDiskDrive[1] -IDE -Bus 0 -LUN 1

Compress-SCVirtualDiskDrive

Convert-SCVirtualDiskDrive

Expand-SCVirtualDiskDrive

Get-SCVirtualDiskDrive

New-SCVirtualDiskDrive

Remove-SCVirtualDiskDrive

Get-SCVirtualMachine

Partilhar via

Set-SCVirtualDiskDrive