Partilhar via

Using a Dedicated Administrator Connection

  • Artigo

SQL Server 2005 provides a special diagnostic connection for administrators when standard connections to the server are not possible. This diagnostic connection allows an administrator to access SQL Server to execute diagnostic queries and troubleshoot problems even when SQL Server is not responding to standard connection requests.

This dedicated administrator connection (DAC) supports encryption and other security features of SQL Server. The DAC only allows changing the user context to another admin user.

SQL Server makes every attempt to make DAC connect successfully, but under extreme situations it may not be successful.

Connecting with DAC

By default, the connection is only allowed from a client running on the server. Network connections are not permitted unless they are configured by using the SQL Server Surface Area Configuration tool or the sp_configure stored procedure with the remote admin connections option.

Only members of the SQL Server sysadmin role can connect using the DAC.

The DAC is available and supported through the sqlcmd command-prompt utility using a special administrator switch (-A). For more information about using sqlcmd, see Using sqlcmd with Scripting Variables. You can also connect prefixing admin: to the instance name in the format sqlcmd -Sadmin:<instance_name>. You can also initiate a DAC from a SQL Server Management Studio Query Editor by connecting to admin:<instance_name>.

Restrictions

Because the DAC exists solely for diagnosing server problems in rare circumstances, there are some restrictions on the connection:

  • To guarantee that there are resources available for the connection, only one DAC is allowed per instance of SQL Server. If a DAC connection is already active, any new request to connect through the DAC is denied with error 17810.
  • To conserve resources, SQL Server 2005 Express Edition does not listen on the DAC port unless started with a trace flag 7806.
  • The DAC initially attempts to connect to the default database associated with the login. After it is successfully connected, you can connect to the master database. If the default database is offline or otherwise not available, the connection will return error 4060. However, it will succeed if you override the default database to connect to the master database instead using the following command:
    sqlcmd –A –d master
    We recommend that you connect to the master database with the DAC because master is guaranteed to be available if the instance of the Database Engine is started.
  • SQL Server prohibits running parallel queries or commands with the DAC. For example, error 3637 is generated if you execute either of the following statements with the DAC:
    • RESTORE
    • BACKUP
  • Only limited resources are guaranteed to be available with the DAC. Do not use the DAC to run resource-intensive queries (for example. a complex join on large table) or queries that may block. This helps prevent the DAC from compounding any existing server problems. To avoid potential blocking scenarios, if you have to run queries that may block, run the query under snapshot-based isolation levels if possible; otherwise, set the transaction isolation level to READ UNCOMMITTED and set the LOCK_TIMEOUT value to a short value such as 2000 milliseconds, or both. This will prevent the DAC session from getting blocked. However, depending on the state that the SQL Server is in, the DAC session might get blocked on a latch. You might be able to terminate the DAC session using CNTRL-C but it is not guaranteed. In that case, your only option may be to restart SQL Server.
  • To guarantee connectivity and troubleshooting with the DAC, SQL Server reserves limited resources to process commands run on the DAC. These resources are typically only enough for simple diagnostic and troubleshooting functions, such as those listed below.

Although you can theoretically run any Transact-SQL statement that does not have to execute in parallel on the DAC, we strongly recommend that you restrict usage to the following diagnostic and troubleshooting commands:

  • Querying dynamic management views for basic diagnostics such as sys.dm_tran_locks for the locking status, sys.dm_os_memory_cache_counters to check the health of caches, and sys.dm_exec_requests and sys.dm_exec_sessions for active sessions and requests. Avoid dynamic management views that are resource intensive (for example, sys.dm_tran_version_store scans the full version store and can cause extensive I/O) or that use complex joins. For information about performance implications, see the documentation for the specific dynamic management view.
  • Querying catalog views.
  • Basic DBCC commands such as DBCC FREEPROCCACHE, DBCC FREESYSTEMCACHE, DBCC DROPCLEANBUFFERS**,** and DBCC SQLPERF. Do not run resource-intensive commands such as DBCC CHECKDB, DBCC DBREINDEX, or DBCC SHRINKDATABASE.
  • Transact-SQL KILL <spid> command. Depending on the state of SQL Server, the KILL command might not always succeed; then the only option may be to restart SQL Server. The following are some general guidelines:
    • Verify that the SPID was actually killed by querying SELECT * FROM sys.dm_exec_sessions WHERE session_id = <spid>. If it returns no rows, it means the session was killed.
    • If the session is still there, verify whether there are tasks assigned to this session by running the query SELECT * FROM sys.dm_os_tasks WHERE session_id = <spid>. If you see the task there, most likely your session is currently being killed. Note that this may take considerable amount of time and may not succeed at all.
    • If there are no tasks in the sys.dm_os_tasks associated with this session, but the session remains in sys.dm_exec_sessions after executing the KILL command, it means that you do not have a worker available. Select one of the currently running tasks (a task listed in the sys.dm_os_tasks view with a sessions_id <> NULL), and kill the session associated with it to free up the worker. Note that it may not be enough to kill a single session: you may have to kill multiple ones.

DAC Port

SQL Server listens for the DAC on a dedicated TCP/IP port dynamically assigned upon Database Engine startup. The error log contains the port number the DAC is listening on. By default the DAC listener accepts connection on only the local port. For a code sample that activates remote administration connections, see remote admin connections Option.

After the remote administration connection is configured, the DAC listener is enabled without requiring a restart of SQL Server and a client can now connect to the DAC remotely. You can enable the DAC listener to accept connections remotely even if SQL Server is unresponsive by first connecting to SQL Server using the DAC locally, and then executing the sp_configure stored procedure to accept connection from remote connections.

On cluster configurations, the DAC will be off by default. Users can execute the remote admin connection option of sp_configure to enable the DAC listener to access a remote connection. If SQL Server is unresponsive and the DAC listener is not enabled, you might have to restart SQL Server to connect with the DAC. Therefore, we recommend that you enable the remote admin connections configuration option on clustered systems.

The DAC port is assigned dynamically by SQL Server during startup. When connecting to the default instance, the DAC avoids using a SQL Server Resolution Protocol (SSRP) request to the SQL Server Browser Service when connecting. It first connects over TCP port 1434. If that fails, it makes an SSRP call to get the port. If SQL Server Browser is not listening for SSRP requests, the connection request returns an error. Refer to the error log to find the port number DAC is listening on. If SQL Server is configured to accept remote administration connections, the DAC must be initiated with an explicit port number:

sqlcmd–Stcp:<server>,<port>

The SQL Server error log lists the port number for the DAC, which is 1434 by default. If SQL Server is configured to accept local DAC connections only, connect using the loopback adapter using the following command:

sqlcmd–S127.0.0.1,1434

Example

In this example, an administrator notices that server URAN123 is not responding and wants to diagnose the problem. To do this, the user activates the sqlcmd command prompt utility and connects to server URAN123 using -A to indicate the DAC.

sqlcmd -S URAN123 -U sa -P <xxx> –A

The administrator can now execute queries to diagnose the problem and possibly terminate the unresponsive sessions.

See Also

Tasks

How to: Use the Dedicated Administrator Connection with SQL Server Management Studio

Concepts

Using sqlcmd with Scripting Variables
Setting Server Configuration Options

Other Resources

sqlcmd Utility
SELECT (Transact-SQL)
sp_who (Transact-SQL)
sp_lock (Transact-SQL)
SET TRANSACTION ISOLATION LEVEL (Transact-SQL)
SET LOCK_TIMEOUT (Transact-SQL)
KILL (Transact-SQL)
DBCC CHECKALLOC (Transact-SQL)
DBCC CHECKDB (Transact-SQL)
DBCC OPENTRAN (Transact-SQL)
DBCC INPUTBUFFER (Transact-SQL)
Transaction Related Dynamic Management Views and Functions
Trace Flags (Transact-SQL)

Help and Information

Getting SQL Server 2005 Assistance

Change History

Release History

14 April 2006
New content:
  • Documented trace flag 7806 for SQL Server 2005 Express Edition.

5 December 2005
New content:
  • Acknowledged that DAC may not always be able to connect.