LUA Secondary Return Codes

Artigo
04/19/2022

0x00000000

LUA_SEC_RC_OK
No additional information exists for LUA_OK.

0x00000001

LUA_INVALID_LUNAME
An invalid lua_luname name was specified.

0x00000002

LUA_BAD_SESSION_ID
An invalid value for lua_sid was specified in the verb control block (VCB).

0x00000003

LUA_DATA_TRUNCATED
The data was truncated because the data received was longer than the buffer length specified in lua_max_length.

0x00000004

LUA_BAD_DATA_PTR
The lua_data_ptr parameter either does not contain a valid pointer or does not point to a read/write segment, and supplied data is required.

0x00000005

LUA_DATA_LENGTH_ERROR
One of the following occurred:

The supplied data segment for SLI_RECEIVE or SLI_SEND is not a read/write data segment as required.
The supplied data segment for SLI_RECEIVE is not as long as that provided in lua_max_length.
The supplied data segment for SLI_SEND is not as long as that provided in lua_data_length.

0x00000006

LUA_RESERVED_FIELD_NOT_ZERO
A reserved parameter for the verb just issued is not set to zero.

0x00000007

LUA_INVALID_POST_HANDLE
For a Windows system using events as the asynchronous posting method, the Windows-based logical unit application (LUA) VCB does not contain a valid event handle.

0x0000000C

LUA_PURGED
SLI_PURGE was issued and canceled SLI_RECEIVE.

0x0000000F

LUA_BID_VERB_ERROR
The buffer with the SLI_BID VCB was released before the SLI_RECEIVE with lua_flag1.bid_enable set to 1 was issued.

0x00000010

LUA_NO_PREVIOUS_BID_ENABLED
SLI_BID was not issued prior to issuing SLI_RECEIVE with bid_enable.

0x00000011

LUA_NO_DATA
No data was available to read when SLI_RECEIVE containing a no-wait parameter was issued.

0x00000012

LUA_BID_ALREADY_ENABLED
SLI_RECEIVE was issued with bid_enable when SLI_BID was already active.

0x00000013

LUA_VERB_RECORD_SPANS_SEGMENTS
The LUA VCB length parameter plus the segment offset is beyond the segment end.

0x00000014

LUA_INVALID_FLOW
The lua_flag1 flow flags were set incorrectly when a verb was issued as follows:

When issuing SLI_SEND to send an SNA response, set only one lua_flag1 flow flag.
When issuing SLI_RECEIVE, set at least one lua_flag1 flow flag.

0x00000015

LUA_NOT_ACTIVE
LUA was not active within Microsoft Host Integration Server when an LUA verb was issued.

0x00000016

LUA_VERB_LENGTH_INVALID
An LUA verb was issued with the value of lua_verb_length unexpected by the LUA.

0x00000019

LUA_REQUIRED_FIELD_MISSING
The verb that was issued either did not include a data pointer (if the data count was not zero) or did not include an lua_flag1 flow flag.

0x00000030

LUA_READY
Following a NOT_READY status, this status is issued to notify you that the Session Level Interface (SLI) is ready to process commands.

0x00000031

LUA_NOT_READY
One of the following caused the SLI session to be temporarily suspended:

An SNA UNBIND type 0x02 command was received, indicating a new BIND is coming.

If the UNBIND type 0x02 is received after the beginning SLI_OPEN is complete, the session is suspended until a BIND, optional CRV and STSN, and SDT flows are received. These routines are re-entrant because they must be called again. The session resumes after the SLI processes the SDT command. If the UNBIND type 0x02 is received while SLI_OPEN is still processing, the primary return code is session-failure, not status.
The receipt of an SNA CLEAR caused the suspension.

Receipt of an SNA SDT will cause the session to resume.

0x00000032

LUA_INIT_COMPLETE
The LUA interface initialized the session while SLI_OPEN was processing. LUA applications that issue SLI_OPEN with lua_open_type_prim_sscp receive this status on SLI_RECEIVE or SLI_BID.

0x00000033

LUA_SESSION_END_REQUESTED
The LUA interface received an SNA shutdown command (SHUTD) from the host, indicating the host is ready to shut down the session.

0x00000034

LUA_NO_SLI_SESSION
A session was not open or was down due to an SLI_CLOSE or session failure when a command was issued.

0x00000035

LUA_SESSION_ALREADY_OPEN
A session is already open for the logical unit (LU) name specified in SLI_OPEN.

0x00000036

LUA_INVALID_OPEN_INIT_TYPE
The value in the lua_init_type contained in SLI_OPEN is invalid.

0x00000037

LUA_INVALID_OPEN_DATA
The lua_init_type for the SLI_OPEN issued is set to LUA_INIT_TYPE_SEC_IS when the buffer for data does not have a valid INITSELF command.

0x00000038

LUA_UNEXPECTED_SNA_SEQUENCE
Unexpected data or commands were received from the host while SLI_OPEN was processing.

0x00000039

LUA_NEG_RSP_FROM_BIND_ROUTINE
The user-supplied SLI_BIND routine responded negatively to the BIND. SLI_OPEN ended unsuccessfully.

0x0000003B

LUA_NEG_RSP_FROM_STSN_ROUTINE
The user-supplied SLI STSN routine responded negatively to the STSN. SLI_OPEN ended unsuccessfully.

0x0000003E

LUA_INVALID_OPEN_ROUTINE_TYPE
The lua_open_routine_type for the SLI_OPEN list of extension routines is invalid.

0x0000003F

LUA_MAX_NUMBER_OF_SENDS
The application issued a third SLI_SEND before one completed.

0x00000040

LUA_SEND_ON_FLOW_PENDING
An SLI_SEND was still outstanding when the application issued another SLI_SEND for an SNA flow.

0x00000041

LUA_INVALID_MESSAGE_TYPE
The lua_message_type parameter is not recognized by the LUA interface.

0x00000042

LUA_RECEIVE_ON_FLOW_PENDING
An SLI_RECEIVE was still outstanding when this application issued another SLI_RECEIVE for an SNA flow.

0x00000043

LUA_DATA_LENGTH_ERROR
The application did not provide user-supplied data required by the verb issued. Note that when SLI_SEND is issued for an SNA LUSTAT command, status (in four bytes) is required, and that when SLI_OPEN is issued with secondary initialization, data is required.

0x00000044

LUA_CLOSE_PENDING
One of the following occurred:

A CLOSE_ABEND was still pending when another CLOSE_ABEND was issued. You can issue a CLOSE_ABEND if a CLOSE_NORMAL is pending.
Either a CLOSE_ABEND or a CLOSE_NORMAL was still pending when a CLOSE_NORMAL was issued.

0x00000046

LUA_NEGATIVE_RSP_CHASE
A negative response to an SNA CHASE command from the host was received by the LUA interface while SLI_CLOSE was being processed. SLI_CLOSE continued processing to stop the session.

0x00000047

LUA_NEGATIVE_RSP_SHUTC
A negative response to an SNA SHUTC command from the host was received by the SLI while SLI_CLOSE was still being processed. SLI_CLOSE continued processing to stop the session.

0x00000048

LUA_NEGATIVE_RSP_RSHUTD
A negative response to an SNA RSHUTD command from the host was received by the LUA interface while SLI_CLOSE was being processed. SLI_CLOSE continued processing to stop the session.

0x0000004A

LUA_NO_RECEIVE_TO_PURGE
No SLI_RECEIVE was outstanding when you issued SLI_PURGE. One of two situations caused the problem:

SLI_RECEIVE completed before SLI_PURGE finished processing.

You can change the application to take care of this problem because it is not an error condition.
The lua_data_ptr parameter does not correctly point to the SLI_RECEIVE you want to purge.

0x0000004D

LUA_CANCEL_COMMAND_RECEIVED
The host sent an SNA CANCEL command to cancel the data chain currently being received by SLI_RECEIVE.

0x0000004E

LUA_RUI_WRITE_FAILURE
An unexpected error was posted to the SLI by RUI_WRITE.

0x00000051

LUA_SLI_BID_PENDING
An SLI verb was still active when another SLI_BID was issued. Only one SLI_BID can be active at a time.

0x00000052

LUA_SLI_PURGE_PENDING
An SLI_PURGE was still active when another SLI_PURGE was issued. Only one SLI_PURGE can be active at a time.

0x00000053

LUA_PROCEDURE_ERROR
A host procedure error is indicated by the receipt of an NSPE or NOTIFY message. The return code is posted to SLI_OPEN when the retry option is not used. To use the reset option, set lua_wait to a value other than zero. The LOGON or INITSELF command will be retried until the host is ready or until you issue SLI_CLOSE.

0x00000054

LUA_INVALID_SLI_ENCR_OPTION
The lua_encr_decr_option parameter was set to 128 in SLI_OPEN, which is not supported for the encryption/decryption processing option.

0x00000055

LUA_RECEIVED_UNBIND
The primary LU sent an SNA UNBIND command to the LUA interface when a session was active. As a result, the session was stopped.

0x0000007F

LUA_SLI_LOGIC_ERROR
The LUA interface found an internal error in logic.

0x00000080

LUA_TERMINATED
The session was terminated when a verb was pending. The verb process has been canceled.

0x00000081

LUA_NO_RUI_SESSION
No session has been initialized for the LUA verb issued, or some verb other than SLI_OPEN was issued before the session was initialized.

0x00000083

LUA_INVALID_PROCESS
The session for which a Request Unit Interface (RUI) verb was issued is unavailable because another process owns the session.

0x0000008C

LUA_LINK_NOT_STARTED
The LUA was not able to activate the data link during initialization of the session.

0x0000008D

LUA_INVALID_ADAPTER
The configuration for the data link control (DLC) is in error, or the configuration file is corrupted.

0x0000008E

LUA_ENCR_DECR_LOAD_ERROR
An unexpected return code was received from the OS/2 DosLoadModule function while attempting to load the user-provided encryption or decryption dynamic link module.

0x0000008F

LUA_ENCR_DECR_LOAD_ERROR
An unexpected return code was received from the OS/2 DosGetProcAddr function while attempting to get the procedure address within the user-provided encryption or decryption dynamic link module.

0x000000BE

LUA_NEG_NOTIFY_RSP
The system services control point (SSCP) responded negatively to a NOTIFY request issued indicating that the secondary LU was capable of a session. The half-session component that received the request understood and supported the request but could not execute it.

0x000000FF

LUA_LU_INOPERATIVE
A severe error occurred while the RUI was attempting to stop the session. This LU is unavailable for any LUA requests until an ACTLU is received from the host.

0x08010000

LUA_RESOURCE_NOT_AVAILABLE
The logical unit, physical unit, link, or link station specified in the request unit is unavailable. This return code is posted to SLI_OPEN when a resource is unavailable unless you use the retry option.

To use the retry option, set lua_wait to a value other than zero. The LOGON or INITSELF command will be retried until the host is ready or until you issue SLI_CLOSE.

0x08050000

LUA_SESSION_LIMIT_EXCEEDED
The session requested was not activated because a network addressable unit (NAU) is at its session limit.

This SNA sense code applies to the following requests: BID, CINIT, INIT, and ACTDRM. The code will be posted to SLI_OPEN when an NAU is at its limit, unless you use the retry option.

To use the retry option, set lua_wait to a value other than zero. The LOGON or INITSELF command will be retried until the host is ready or until you issue SLI_CLOSE.

0x08090000

LUA_MODE_INCONSISTENCY
Performing this function is not allowed by the current status. The request sent to the half-session component was not executed even though it was understood and supported. This SNA sense code is also an exception request sense code.

0x08120000

LUA_INSUFFICIENT_RESOURCES
A temporary condition of insufficient resources caused the request receiver to be unable to perform. The request sent to the half-session component was not executed, even though it was understood and supported.

0x081B0000

LUA_RECEIVER_IN_TRANSMIT_MODE
Either resources needed to handle normal flow data were not available or the state of the half-duplex contention was not received when a normal-flow request was received. The result is a race condition. This SNA sense code is also an exception request sense code.

0x08310000

LUA_LU_COMPONENT_DISCONNECTED
An LU component is unavailable because it is not connected properly. Make sure that the power is on.

0x08350001

LUA_NEGOTIABLE_BIND_ERROR
A negotiable BIND was received, which is only allowed by the SLI when a user-supplied SLI_BIND routine is provided with SLI_OPEN.

0x08350002

LUA_BIND_FM_PROFILE_ERROR
Only file management header profiles 3 and 4 are supported by the LUA interface. A file management profile other than 3 or 4 was found on the BIND.

0x08350003

LUA_BIND_TS_PROFILE_ERROR
Only Transmission Service (TS) profiles 3 and 4 are supported by the LUA interface. A TS profile other than 3 or 4 was found on the BIND.

0x0835000E

LUA_BIND_LU_TYPE_ERROR
Only LU 0, LU 1, LU 2, and LU 3 are supported by LUA. An LU other than 0, 1, 2, or 3 was found.

0x08570000

LUA_SSCP_LU_SESSION_NOT_ACTIVE
The required SSCP-LU is inactive. Specific sense code information is in bytes 2 and 3. Valid settings are 0x0000, 0x0001, 0x0002, 0x0003, and 0x0004.

0x08780001

LUA_RECEIVE_CORRELATION_TABLE_FULL
The session receive correlation table for the flow requested reached its capacity.

0x08780002

LUA_SEND_CORR_TABLE_FULL
The session send correlation table for the flow requested reached its capacity.

0x087D0000

LUA_SESSION_SERVICE_PATH_ERROR
A request for session services cannot be rerouted to an SSCP-SSCP session path. Specific sense code information in bytes 2 and 3 gives more information about why the request cannot be rerouted.

0x10020000

LUA_RU_LENGTH_ERROR
The request/response unit (RU) request was an incorrect length (either too short or too long). The RU was not interpreted or processed even though it was delivered to the half-session component. The half-session capabilities do not match. This SNA sense code is also an exception request sense code.

0x10030000

LUA_FUNCTION_NOT_SUPPORTED
The LUA does not support the requested function. A control character, an RU parameter, or a formatted request code may have specified the function. Specific sense code information is in bytes 2 and 3.

0x10050121

LUA_HDX_BRACKET_STATE_ERROR
The existing state error prevented the current request from being sent. The determination was made by a protocol computer.

0x10050122

LUA_RESPONSE_ALREADY_SENT
A response for the chain was already sent so that the current request was not sent. The determination was made by a protocol computer.

0x10050123

LUA_EXR_SENSE_INCORRECT
The application responded negatively to an exception request. The sense code was unacceptable.

0x10050124

LUA_RESPONSE_OUT_OF_ORDER
The current response was not for the oldest request. The determination was made by a protocol computer.

0x10050125

LUA_CHASE_RESPONSE_REQUIRED
A CHASE response was still outstanding when a more recent request was attempted. The determination was made by a protocol computer.

0x20020000

LUA_CHAINING_ERROR
The sequence of the chain indicator settings is in error. An invalid request header or request unit for the receivers current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20030000

LUA_BRACKET
The sender failed to enforce the session bracket rules. Note that contention and race conditions are exempt from this error. An invalid request header or request unit for the receivers current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20040000

LUA_DIRECTION
While the half-duplex flip-flop state was NOT_RECEIVE, a request for normal flow was received. An invalid request header or request unit for the receivers current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20050000

LUA_DATA_TRAFFIC_RESET
A half-session of an active session with inactive data traffic received a normal flow DFC or FMD request. An invalid request header or request unit for the receivers current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20060000

LUA_DATA_TRAFFIC_QUIESCED
A data flow control (DFC) or function management data (FMD) request was received from a half-session that sent either a SHUTC command or QC command, and the DFC or FMD request has not responded to a RELQ command. An invalid request header or request unit for the receivers current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20070000

LUA_DATA_TRAFFIC_NOT_RESET
While the data traffic state was not reset, the session control request was received. An invalid request header or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20080000

LUA_NO_BEGIN_BRACKET
The receiver has already sent a positive response to a Bracket Initiation Stopped (BIS) command when a BID or an FMD request specifying BBI=BB was received. An invalid request header or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x20090000

LUA_SC_PROTOCOL_VIOLATION
A violation of the session control (SC) protocol occurred. A request (that is permitted only after an SC request and a positive response to that request have been successfully exchanged) was received before the required exchange. Byte 4 of the sense data contains the request code. No user data exists for this sense code. An invalid header request or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x200A0000

LUA_IMMEDIATE_REQUEST_MODE_ERROR
The request violated the immediate request mode protocol. An invalid header request or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x200B0000

LUA_QUEUED_RESPONSE_ERROR
The request violated the queued response protocol. An invalid header request or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x200C0000

LUA_ERP_SYNC_EVENT_ERROR
A violation of the ERP synchronous event protocol occurred. An invalid header request or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x200D0000

LUA_RSP_BEFORE_SENDING_REQ
A previously received request has not yet been responded to and an attempt was made in half-duplex send/receive mode to send a normal flow request. An invalid header request or request unit for the received current session control or data flow control state was found. Delivery to the half-session component was prevented.

0x200E0000

LUA_RSP_CORRELATION_ERROR
A response was sent that does not correspond to a previously received request or a response was received that does not correspond to a request sent previously.

0x200F0000

LUA_RSP_PROTOCOL_ERROR
A violation of the response protocol was found in the response received from the primary half-session.

0x40010000

LUA_INVALID_SC_OR_NC_RH
The request/response header (RH) of a session control (SC) or network control (NC) request was invalid.

0x40030000

LUA_BB_NOT_ALLOWED
The begin bracket indicator was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40040000

LUA_EB_NOT_ALLOWED
The end bracket indicator was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40060000

LUA_EXCEPTION_RSP_NOT_ALLOWED
When an exception response was not allowed, one was requested. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40070000

LUA_DEFINITE_RSP_NOT_ALLOWED
When a definite response was not allowed, one was requested. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40080000

LUA_PACING_NOT_SUPPORTED
The request contained a pacing indicator when support of pacing for this session does not exist for the receiving half-session or boundary function half-session. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40090000

LUA_CD_NOT_ALLOWED
The change-direction indicator was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x400A0000

LUA_NO_RESPONSE_NOT_ALLOWED
A request other than an EXR contained a NO RESPONSE. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x400B0000

LUA_CHAINING_NOT_SUPPORTED
The chaining indicators were incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x400C0000

LUA_BRACKETS_NOT_SUPPORTED
The bracket indicators were incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x400D0000

LUA_CD_NOT_SUPPORTED
The change-direction indicator was set, but LUA does not support change-direction for this situation. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x400F0000

LUA_INCORRECT_USE_OF_FI
The format indicator was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40100000

LUA_ALTERNATE_CODE_NOT_SUPPORTED
The code selection indicator was set, but LUA does not support code selection for this session. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40110000

LUA_INCORRECT_RU_CATEGORY
The request unit category indicator was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40120000

LUA_INCORRECT_REQUEST_CODE
The request code was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40130000

LUA_INCORRECT_SPEC_OF_SDI_RTI
The sense-data-included indicator (SDI) and the response-type indicator (RTI) were not specified correctly on a response. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40140000

LUA_INCORRECT_DR1I_DR2I_ERI
The DR1I, the DR2I, and the exception response indicator (ERI) were specified incorrectly. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40150000

LUA_INCORRECT_USE_OF QRI
The queued response indicator (QRI) was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40160000

LUA_INCORRECT_USE_OF_EDI
The EDI was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x40170000

LUA_INCORRECT_USE_OF_PDI
The padded data indicator (PDI) was incorrectly specified. The BIND options chosen previously or the architectural rules were violated by the request header parameter values. Delivery to the half-session component was prevented. The errors are not dependent on the current session state. The senders failure to enforce session rules may have caused the errors.

0x80030000

LUA_NAU_INOPERATIVE
The network addressable unit (NAU) is not able to process responses or requests. Delivery to the receiver could not take place for one of the following reasons:

A path information unit error
A path outage
An invalid sequence of requests for activation

If a path error is received during an active session that usually means there is no longer a valid path to the session partner.

0x80050000

LUA_NO_SESSION
A request to activate a session is required because no active half-session in the receiving end node for the origination-destination pair exists, or no active boundary function half-session component for the origination-destination pair in a node that supplies the boundary function exists. Delivery of the request could not take place for one of the following reasons:

A path information unit error
A path outage
An invalid sequence of requests for activation

If a path error is received during an active session that usually indicates there is no longer a valid path to the session partner.

Partilhar via