Initialize_Conversation (CPI-C)

Artigo
04/19/2022

The Initialize_Conversation call (function name cminit) is issued by the invoking program to obtain an 8-byte conversation identifier and to set the initial values for the conversations characteristics.

Syntax

  
CM_ENTRY Initialize_Conversation(   
  unsigned char FAR *conversation_ID,    
  unsigned char FAR *sym_dest_name,    
  CM_INT32 FAR *return_code            
);

Parameters

conversation_ID
Returned parameter. Specifies the identifier for the conversation. It is used by subsequent CPI-C calls.

sym_dest_name
Supplied parameter. Specifies the symbolic destination name—the name associated with a side information entry loaded from the configuration file or defined by Set_CPIC_Side_Information calls.

This parameter is an 8-byte ASCII character string. The allowed characters are as follows:

Uppercase letters
Numerals from 0 through 9

This parameter can also be set to eight spaces. In this case, the invoking program must issue the following calls before issuing Allocate:
Set_Mode_Name
Set_Partner_LU_Name
Set_TP_Name

return_code
The code returned from this call. The valid return codes are listed later in this topic.

Return Codes

CM_OK
Primary return code; the call executed successfully.

CM_PROGRAM_PARAMETER_CHECK
Primary return code; the value specified by sym_dest_name does not match a symbolic destination name in the side information table and is not a space.

CM_PRODUCT_SPECIFIC_ERROR
Primary return code; a product-specific error occurred and has been logged in the products error log.

State Changes

The conversation is in RESET state.

If the return_code is CM_OK, the conversation changes to INITIALIZE state. For other return codes, the conversation state remains unchanged.

Remarks

The initial values are CPI-C defaults or are derived from side information associated with the symbolic destination name. For more information about initial values and side information, see Initial Conversation Characteristics and Side Information for CPI-C Programs.

Initial values can be changed by the Set_ calls.

If the side information contains an invalid value or a Set_ call sets a conversation characteristic to an invalid value, the error is returned on the Allocate call.

If a CPI-C application attempts to invoke more than one concurrent conversation, only a single local APPC logical unit (LU) is used by all conversations. This prevents concurrent conversations across two or more dependent LU 6.2 LUs, causing subsequent Initialize_Conversation (CMALLC) calls to wait for the first conversation to be deallocated.

If the CPI-C application needs to invoke more than one concurrent conversation, independent LU 6.2 must be used between Host Integration Server and the remote system.

Upon successful execution of this call, CPI-C generates a conversation identifier. This identifier is a required parameter for all other CPI-C calls issued for this conversation by the invoking program.

Under normal circumstances, a CPI-C application cannot invoke two concurrent conversations using two different local APPC LUs. A registry key is available that when set forces CPI-C to issue a new TP_STARTED verb on every Initialize_Conversation (cminit) call. This is necessary to force APPC resource location for each call. The registry key that must be defined to force this behavior is the following:

\HKLM\CurrentControlSet\Services\SnaBase\Parameters\Client\GETNEWTPID

Partilhar via