WCF Authentication: Custom Username and Password Validator

Artigo
10/05/2007

There are a number of authentication techniques supported by WCF. For instance Windows Authentication, X509 Certificates, Issued Tokens, and Username and Password are all mechanisms that can be used for authentication.

These client credential types are configured as part of the binding configuration for an endpoint. For example the config section below customises the netTcpBinding to use an X509 certificate:

</security>

</binding>

</netTcpBinding>

If you change the Client Credential Type to “UserName”, you can then pass username and passwords to the service and authenticate the client based on these credentials.

Sending unencrypted username and password over any communication framework is usually not advisable. Therefore, when you opt in for the UserName client credential type, WCF insists that your service must also reference a service certificate that contains a private key. The public key in this certificate is used to protect the confidentiality of the username and password sent to the service. The private key is then used by the service to obtain those encrypted credentials.

If a server certificate is not specified, at service start-up time, you will receive the following exception: “The service certificate is not provided. Specify a service certificate in ServiceCredentials.”

By default, when a user name and password is used for authentication, WCF uses Windows to validate the username and password. Having said that, WCF is one of the world’s most extensible communication frameworks and it should not surprise you if I say that you can take control of the username and password validation:

This first step is to create a “validator” by inheriting from the UserNamePasswordValidator class and override the Validate method (Add a reference to System.IdentityModel.dll first):

public class CustomUserNameValidator : UserNamePasswordValidator

{

public override void

Validate(string userName, string password)

{

// perform the validation logic

}

The next step is to configure the service to use this custom validator. As this is the local behavior of the service, you will need to specify the custom validator as part of your service behavior configuration:

<userNameAuthentication

userNamePasswordValidationMode="Custom"

customUserNamePasswordValidatorType=

"MyAssembly.CustomUserNameValidator, MyAssembly"/>

<serviceCertificate

findValue="localhost"

x509FindType="FindBySubjectName"

storeLocation="CurrentUser"

storeName="My" />

</serviceCredentials>

</behavior>

As you can see, there are two elements defined as part of the serviceCredentials section. The userNameAuthentication element specifies that a custom validator is used and the serviceCertificate element provides a reference to the X509 certificate used by the service to ensure the integrity of the client credentials. See here for information on how to create a temporary certificate for use during development.

Do not forget to set service’s behaviourConfiguration property to the name of the service behavior defined above:

Both client and service endpoints need to enable Username and Password authentication mode on their bindings:

</security>

</binding>

</netTcpBinding>

Our service is now fully configured. The final step is to provide the username and password to the client proxy which can then be encrypted and sent to the service. If you are using the ChannelFactory directly to create a proxy then use the code below to set the username and password programmatically:

ChannelFactory<ISimpleService> factory =

new ChannelFactory<ISimpleService>(endpointConfigurationName);

factory.Credentials.UserName.UserName = "Pedram";

factory.Credentials.UserName.Password = "Password01";

However, if SvcUtil or Visual Studio has generated a proxy for you, use the code below to set the username and password:

proxy.ClientCredentials.UserName.UserName = "Pedram";

proxy.ClientCredentials.UserName.Password = "Password01";

Please note that there is no way to set the username and password in config.

Depending on the type of service certificate, you may need to specify a DNS identity for your client endpoints. This is used when the client authenticates the service to ensure that it is talking to the expected service and not any other hoax service intercepting your calls to the genuine service. The exception below is an indication of this:

“Identity check failed for outgoing message. The expected DNS identity of the remote endpoint was 'X' but the remote endpoint provided DNS claim 'Y'. If this is a legitimate remote endpoint, you can fix the problem by explicitly specifying DNS identity 'Y' as the Identity property of EndpointAddress when creating channel proxy.”

You can modify the client endpoint to include an identity element such as the one below (see here for more information on service identity):

</identity>

You are now ready to test the service.

You can also download a sample application which tries this technique over netTcp and wsHttp bindings from here (built using Visual Sudio 2008 beta 2 and is compatible with .NET Framework 3.0). Follow the steps below before running the sample application:

- Create a certificate

- Modify the serviveCertificate elements defined in both client and service App.config files to reference your new certificate (you may decide to change the FindType as well)

- Specify a correct DNS identity value for the client endpoints

Let me know what you thought of this article...

References:

- Selecting a WCF Credential type

- Bypassing certificate validation

- Common WCF Security Scenarios

- Transport Security with Basic Authentication

- Service Identity and Authentication

- How To Use the ASP.NET Membership Provider

WCFSecurity.zip

Comments

Anonymous
October 05, 2007
PingBack from http://www.artofbam.com/wordpress/?p=5519
Anonymous
October 24, 2007
Thanks for the guide. However, one of the issues here is that any exceptions thrown in the Validate() method will not be reported back to the client properly. All you will get is a MessageSecurityException. This has been reported several times (e.g. here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=575748&SiteID=1) Unfortunatley Microsoft did not come up with an adequate response yet.
Anonymous
November 27, 2007
I created a certificate "CN=SignedByCA" and updated the App.Config files to refer to its thumbprint. Now when I try to start the host, I get the following exception on host.Open(): The certificate 'CN=SignedByCA' must have a private key that is capable of key exchange. The process must have access rights for the private key. I'm not sure how to give the host access to the private key. I'm starting the host process using VS 2008. Regards, Jon
Anonymous
January 10, 2008
I'm having the same issue Jon mentioned. I'm also getting the message: The certificate 'CN=SignedByCA' must have a private key that is capable of key exchange. The process must have access rights for the private key. Please.... help :S
Anonymous
January 31, 2008
The comment has been removed
Anonymous
February 01, 2008
Hi, If I authenticate the user using peertrust, How can I get his certificate inside the Operation Contract ? I need the certificate to get others informations.
Anonymous
March 11, 2008
Hi! I was also getting the message: The certificate 'CN=SignedByCA' must have a private key that is capable of key exchange. The process must have access rights for the private key. I solved that by importing the certificate together with the private key, using a pfx fiel which I generated wtih pvk2pfx.
Anonymous
April 19, 2008
This is a digest of WCF Security resources I was collecting for some time. Drop me a comment in case
Anonymous
May 11, 2008
In some of my implemented OperationContract methods i need to log with others method informations, and console output the validated credentials (username/password), how can i get the respective instanciated credential values?
Anonymous
May 11, 2008
Nevermind, ServiceSecurityContext.Current.PrimaryIdentity.Name
Anonymous
May 11, 2008
This is a digest of WCF Security resources I was collecting for some time. Drop me a comment in case it is useful.
Anonymous
July 16, 2008
I had the same problem. These were the steps I took to solve the problem: I removed the generated personal key from the store and issued the following request: makecert -sk SignedByCA -iv TempCA.pvk -n "CN=localhost" -ic TempCA.cer SignedByCA.cer -sr LocalMachine -ss My -sky exchange -pe The created certificate was added to the personal certifcate store of the local computer. After placing this certificate in the personal certificate store of the current user (drag and drop) the error was gone. Hope this will help..... We are not the only ones (Also see this post: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1180892&SiteID=1)
Anonymous
July 23, 2008
Great article but my problem is I'm authenticated on my web site already (setting the generic principal)... not I need to call my services layer... but I no longer have password available... any best practices for how to deal with this?
Anonymous
July 24, 2008
My Service is hosted under IIS with SSL enabled. This works without SSL enabled, but doesn't work with SSL on. Any tips?
Anonymous
August 13, 2008
Good post. Complemented with http://www.digwin.com/view/howto-use-makecert-for-trusted-root-certification-authority-and-ssl-certificate-issuance , it made for an easy implementation of UserName validation. : )
Anonymous
September 22, 2008
Cannot find the X.509 certificate using the following search criteria: StoreName 'My', StoreLocation 'CurrentUser', FindType 'FindByThumbprint', FindValue '8e f9 c6 6f 4e a0 0c 49 4f 84 69 fb de c6 a7 e1 79 01 5b 6e'. Help me!
Anonymous
November 18, 2008
Anyone know how to catch any exception we throw in our Validate() function so we might have some means of returning a code for why validation failed? It would seem that regardless of what SecurityTokenException I throw, the only exception actually caught on the client side is the generic one. I can see my exception if I run diagnostics, but I need the client to see it to detect such things as lockout and other failure reasons...
Anonymous
April 28, 2009
2 Gr1nch

Throw a FaultException from Validate(...)
Catch MessageSecurityException on the client.
In the InnerException property you will find the FaultException you threw. Keep in mind: generic FaultExceptions don't work here as a filter on client side, but you can, for example, use FaultCode during FaultException initialization to be sure that an InnerException the client got from MessageSecurityException is indeed the exception you threw in Validate(...).

Anonymous
May 14, 2009
#.think.in infoDose #28 (29th Apr - 8th May)
Anonymous
May 30, 2009
#.think.in infoDose #28 (29th Apr - 8th May)
Anonymous
October 14, 2009
Exactly what I needed!!! Thanks a whole lot for the post.
Anonymous
November 02, 2009
The comment has been removed
Anonymous
January 24, 2010
i under basichttpbinding bind manner, communicate with silverlight3, i do not need https and certificate,i use http and username and password only to make authentication so what i can do ? and how i can do? msn:jorden008@hotmail.com thank you for your email!! <serviceBehaviors> <behavior name="WcfService.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false"/> <serviceCredentials > <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="WcfService.MyValidator, WcfService"/> </serviceCredentials> </behavior> </serviceBehaviors> do not work well??why??
Anonymous
June 16, 2010
Thanks Pedram for such a great post. And thanks to Dimitris-Ilias Gkanatsios whose inputs were really helpful to me.
Anonymous
December 20, 2010
Hello Sir, I am developing a project in WCF in which I am using WCF Message Based Security with UserNamePassword Client credentials for authenticating the Client.I have also created X509 certificates and provide access to Claims using Claims Based Authorization.Everything is working fine as When I initially call the method of the service it asks for the authentication of the client and after authenticating the Client it provides access to the method which is accurately done but when I call another method from the same service it again asks for authentication which is creating a problem as I don't want to authenticate the Client again and again on every method call of the same service.Is there any way to retain the Client Credentials so that I would not have to re-authenticate the Client on every method call.Please help me in this.This is my first project in WCF so please provide me the step by step guidance on how to do it.I will be thankful to you.
Anonymous
March 31, 2011
Hi first of all this post helped me a lot and i have created security certificate using some help from this post. My problem is I have to call service using js/jquery request. so far I have not found any solution. could you please guide me. thanks
Anonymous
June 21, 2011
I want to download this sample to study, but the link(blogs.msdn.com/.../5295857.ashx) doesn't work, who can send me a copy? thanks email:freedomle@gmail.com
Anonymous
October 06, 2011
I think this is exactly what I need but I am still having a problem in getting my wcf to work. I have been working on this solution for a while now. Is this the proper place for me to place my code and to ask for help?
Anonymous
October 06, 2011
The comment has been removed
Anonymous
October 07, 2011
Here is my situation. I have to consume a WCF service on an external server. From what I understand the security layer is on a network appliance. The service will be hosted on either a sunapp or weblogic server. Test environment: Client and test server service in VS 2010 that are both on IIS (over http). Production environment: Client will be on IIS and server service will be on either a sunapp or weblogic server (over https). Right now, in test, I am getting the following error "The remote server returned an error: (401) Unauthorized.)" when I try to consume the service hosted on IIS from my client. I want to pass the username and password in clear text. The security settings in IIS for both the server and client are set to Enable anonymous access. ONLY the server has basic authentication checked. The question is, how do I accomplish this in test and then move it to production based on the different hosting servers? client config system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IService1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Basic" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://localhost/CAServer/services/Service1.svc" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IService1" contract="ServiceReference1.IService1" name="BasicHttpBinding_IService1" /> </client> </system.serviceModel> server config <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="CAServer.Service1_Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="CAServer.abc.def.ghi.Service1, YepYep"/> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="CAServer.Service1_Behavior" name="CAServer.abc.def.ghi.Service1"> <endpoint address="http://localhost/CAServer/services/Service1.svc" binding="basicHttpBinding" bindingConfiguration="RequestUserName" contract="CAServer.abc.def.ghi.IService1" /> <endpoint address="mex" binding="basicHttpBinding" contract="IMetadataExchange" bindingConfiguration="RequestUserName" /> </service> </services> <bindings> <basicHttpBinding> <binding name="RequestUserName"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Basic" proxyCredentialType="Basic"></transport> </security> </binding> </basicHttpBinding> </bindings> <serviceHostingEnvironment multipleSiteBindingsEnabled="false" /> </system.serviceModel client code Dim x As New ServiceReference1.Service1Client x.ClientCredentials.UserName.UserName = "dave" x.ClientCredentials.UserName.Password = "dave" x.Validate("dave", "dave") server code interface Imports System.ServiceModel ' NOTE: You can use the "Rename" command on the context menu to change the interface name "IService1" in both code and config file together. Namespace abc.def.ghi <ServiceContract()> Public Interface IService1 <OperationContract()> Sub DoWork() <OperationContract()> Sub Validate(ByVal userName As String, ByVal password As String) End Interface End Namespace server code service Imports System.ComponentModel Imports System.IdentityModel.Selectors Imports System.IdentityModel.Tokens Imports System.Runtime.Serialization Imports System.ServiceModel Namespace abc.def.ghi Public Class Service1 Inherits UserNamePasswordValidator Implements IService1 Public Sub DoWork() Implements abc.def.ghi.IService1.DoWork End Sub Public Overrides Sub Validate(ByVal userName As String, ByVal password As String) Implements abc.def.ghi.IService1.Validate If String.IsNullOrEmpty(userName) OrElse String.IsNullOrEmpty(password) Then Throw New SecurityTokenException("Username and password required") End If userName = "dave" password = "dave" If userName <> "dave" And password <> "dave" Then Throw New FaultException(String.Format("Wrong username ({0}) or password ", userName)) End If End Sub End Class End Namespace Please help.
Anonymous
October 07, 2011
Since this is going through IIS I realized that I need to actually pass my network id and pwd to the Validate function in the client code. However, things have changed. I am now required to consume a web service that uses UserTokenName passed in the headers. I have everything set up correctly (I think). I cannot seem to find code that I can use on the server side to confirm that the values I entered into the client config are correct. Any help would be appreciated.
Anonymous
June 19, 2012
مرسی پدرام جان. خیلی مفید بود
Anonymous
July 26, 2014
Thanks for this super cool post I liked a lot, have a look below. http://www.ebiconference.com have a look.

Partilhar via

WCF Authentication: Custom Username and Password Validator

Comments

Recursos adicionais