Checklist: Implementing the SNMP service
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
Checklist: Implementing the SNMP service
| Step | Reference |
|---|---|
Obtain, install, and configure SNMP management software. |
|
Gather information required to implement SNMP on your network. Requirements include contact persons (administrator), physical computer location, configured SNMP community names, and IP or IPX addresses, or computer names of SNMP management systems on your network. |
|
Install SNMP on this computer. |
|
Configure SNMP agent properties. |
|
If you have an additional TCP/IP service in your network, such as a bridge or router, you should consult RFC 1213 for additional configuration information before proceeding. |
"Simple Network Management Protocol" at the Microsoft Windows Resource Kits Web site |
Configure trap destinations. |
|
Configure SNMP security properties. |
Note
- The IPX/SPX protocol is not available on Windows XP 64-bit Edition (Itanium) and the 64-bit versions of the Windows Server 2003 family.