Compartilhar via

Installing infrared devices

  • Artigo

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

Installing infrared devices

Most internal infrared devices are installed by Setup or when you start your computer after adding one of these devices. However, when you attach a serial infrared transceiver to a serial (COM) port or to a USB port, you do need to install it as described in this topic. This topic also describes how to install an internal infrared device that is not automatically detected.

Installing an infrared device connected to a serial port

If you have a desktop computer or a portable computer without an internal infrared device, you can connect a serial infrared transceiver to a serial (COM) port or a USB port. To do so, attach the infrared transceiver to the port, note which port you are using, and then follow the steps in Add a new infrared device to a serial port.

Installing an undetected internal infrared device

If you add an internal infrared device to a computer with Windows XP Home Edition, Windows XP Professional, or Windows Server 2003, Standard Edition already installed, the device is typically detected and installed the next time you start the computer. If this does not occur, you might have to install the device manually. To do so, follow the instructions in Add a new infrared device to a serial port.

Note

  • In the Windows Server 2003 family, only Windows Server 2003, Standard Edition, supports infrared networking.