Compartilhar via

WCN UPnP Verify the router is able to display the WPS Pin (Manual Test)

  • Artigo

This test verifies the router is able to display the WPS PIN. The router should have a way to display the WPS PIN. If the WPS PIN is static, it should be printed on the router and should be exactly 8 numeric characters. If the WPS PIN is dynamic, then the router should have a way to display the current WPS PIN on the router (for example, using an LCD display). A dynamic WPS PIN can be 4 or 8 numeric characters. The test will pass if the router meets the specified criteria and fail if it does not.

Test details

Associated requirements

Device.Network.Router.WCNDynamicPIN Device.Network.Router.WFACertified

See the device hardware requirements.

Platforms

Windows 7 (x86) Windows 8 (x86) Windows 8.1 x86

Expected run time

~5 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless Router Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless Router Testing.

 

 

Send comments about this topic to Microsoft