Compartilhar via


Windows Touch Extra Input Behavior Test

This manual test verifies that a Windows Touch device does not report inputs that are greater than the maximum values, as defined in the test requirements.

Test details

Associated requirements

Device.Digitizer.Touch.ExtraInputBehavior

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~4 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Windows Touch Testing Prerequisites.

Microsoft strives to be consistent in order to provide application developers maximum ease in writing applications. Predictable behavior in Windows enables developers to consider only one case; this predictability can save valuable time. This test enforces the requirement that the fidelity of the initial maximum number of contacts is maintained in the presence of up to five additional contacts. The following example uses a device that supports ten contacts:

To run the extra input behavior test

  1. Place ten contacts on the screen, in any order, location or combination. The device reports all ten contacts according to the HID specification for touch devices.

  2. Place five additional contacts on the screen in any order, location or combination. The device continues to report the original ten contacts, but does not report the newly-added contacts.

    Note  

    Continuing to report the first ten contacts is mandatory, and failure to continue reporting them results in a test failure.

     

  3. Place a sixteenth contact on the screen, and the device ceases to report data. Although the device can optionally define its own specific behavior during this step, we recommend that you stop the reporting at this time.

This test also verifies that HID reports conform to the HID protocol that is described in Windows Pointer Device Data Delivery Protocol and defined in the HID I2C v1.0 Protocol Specification.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Digitizer Testing and How to run the Windows HCK Tests for Touch and Pen Devices.

More information

Command syntax

Command option Description

Logo3.exe -config ExtraInputBehavior.json

Runs the test.

 

File list

File Location

ExtraInputBehavior.json

<testbinroot>\digitizer\Win8Touch

Logo3.exe

<testbinroot>\digitizer\Win8Touch

 

How to run the Windows HCK Tests for Touch and Pen Devices

 

 

Send comments about this topic to Microsoft